Super-Soft "Carding" Wheel For Rust/IM Bluing At Economical Price
Found for us by Ray Hall, Griffith, IN, these baby-soft wire wheels are perfect for carding between coats when rust bluing, or when using the Hot Water Method with Dicropan IM Bluing Solution. Won't remove metal, or give "satin" look.
SPECS: 6" (15.2cm) diameter wheels available in 2 row and 4 row. .0025" diameter stainless steel wire. Staggered rows of 1-3⁄4" (4.44cm) long, tufted bristles. 1⁄4" (6.35mm) hole through 2" (51mm) diameter wood center (drill to fit). 2 row has ½" (13mm) wide face. 4 row has 1-1⁄4" (32mm) wide face. Maximum RPM 3500.
Plus...
Roue de "Cardage" Super-Douce Pour Brunissage/Rust/IM À Prix Économique
Trouvés pour nous par Ray Hall, Griffith, IN, ces roues en fil doux comme un bébé sont parfaites pour le cardage entre les couches lors du brunissage à l'oxyde de fer, ou lors de l'utilisation de la méthode à l'eau chaude avec la solution de brunissage Dicropan IM. Elles ne retireront pas de métal et ne donneront pas un aspect "satiné".
SPÉCIFICATIONS : Roues de 6" (15,2 cm) de diamètre disponibles en 2 rangées et 4 rangées. Fil en acier inoxydable de .0025" de diamètre. Rangées décalées de 1-3⁄4" (4,44 cm) de long, poils touffus. Trou de 1⁄4" (6,35 mm) à travers un centre en bois de 2" (51 mm) de diamètre (percer pour adapter). La version à 2 rangées a une face de ½" (13 mm) de large. La version à 4 rangées a une face de 1-1⁄4" (32 mm) de large. RPM maximum 3500.
Plus...
Évaluations client de GROBET FILE CO. OF AMERICA INC 2 ROW SUPER-SOFT CARDING WHEEL
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 5
Great Product(21.12.2010)
Works great, I just ran a long bolt though it to fabricate an an arbor and chucked it up in my drill press and it does a fantastic job as a carding wheel. Very nicely made for the money and perfect for the job.
Great Item for Rust Blueing(21.03.2011)
I used this to card my double shotgun barrels after rust bluing. Brush has a 1/4 arbor hole, so I just put a long bolt on it and chucked it up in the drill press at about 500 rpm. Really cuts down on time and leaves a great finish. This is baby soft. Almost impossible to overpolish.
If you're rust bluing on the cheap - this is the one thing worth splurging on.
Essential for Slow Rust Blueing(01.04.2011)
The bristles on this wheel are so fine they feel like a paint brush. It is perfect for carding the soft oxidation formed from the boiling steps of original Slow Rust Blueing. I set mine up in a drill press so I can have lots of room to move around and a slow speed that's impossible with a buffer or grinder motor. It works beautifully.
This makes "Slow Rust Blueing" a little(04.12.2011)
I slow rust blue all my projects. This product speeds it up some. It is very soft and does a great job of carding and leaving a very even finish. Highly recommend this product!!!!
Perfect(17.02.2014)
This is the carding wheel to buy for great results. The finish it produces is beautiful!
Perfect, Thanks Brownells(08.05.2018)
I use this everyday with Pilkingtons. Well made, perfect for rust bluing and it doesn't' cost a ton. Run it slow, high speed buffer/grinder will ruin it and your work.
I didn't want to put it in my drill press because i wanted a vertical spin not horizontal which is more comfortable for me and works better for long guns. So I put a long bolt through it, chucked in a 3/8 drill, and clamped the drill in a vice. A wire tie on the trigger to give the speed I want and I have made a couple thousand dollars with it. Buying another one right now.
Works great for rust bluing(02.01.2011)
My first attempt at rust bluing involved an 1895 Colt New Navy revolver. This carding wheel turned the rough black finish that emerged from the rusting and boiling steps into a beautiful finish. The wire bristles are tough enough to remove the rough black, but soft enough to polish without scratching.
Référence: 360164581 GROBET FILE CO. OF AMERICA INC 2 ROW SUPER-SOFT CARDING WHEEL Ref Fabricant: 16.458 Trouvés pour nous par Ray Hall, Griffith, IN, ces roues en fil doux comme un bébé sont parfaites pour le cardage entre les couches lors du brunissage à l'oxyde de fer, ou lors de l'utilisation de la méthode à l'eau chaude avec la solution de brunissage Dicropan IM. Elles ne retireront pas de métal et ne donneront pas un aspect "satiné".
42.9CHF110CHF 42.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Les roues en fil ultra-souples sont idéales pour le cardage lors du brunissage à la rouille.
Elles ne retirent pas de métal et ne laissent pas un aspect "satiné".
Disponibles en versions à 2 rangées et 4 rangées, avec un RPM maximum de 3500.
Caractéristiques
Poids du colis: 0.136kgHauteur d'expédition: 38mmLargeur d'expédition: 157mmLongueur d'expédition: 155mm
Détails de l'article
Fabriqué au USA
Référence: 360164631 GROBET FILE CO. OF AMERICA INC 4 ROW SUPER-SOFT CARDING WHEEL Ref Fabricant: 16463 Trouvés pour nous par Ray Hall, Griffith, IN, ces roues en fil doux comme un bébé sont parfaites pour le cardage entre les couches lors du brunissage à l'oxyde de fer, ou lors de l'utilisation de la méthode à l'eau chaude avec la solution de brunissage Dicropan IM. Elles ne retireront pas de métal et ne donneront pas un aspect "satiné".
54.9CHF0CHF 54.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Super-Soft "Carding" Wheel For Rust/IM Bluing At Economical Price
Found for us by Ray Hall, Griffith, IN, these baby-soft wire wheels are perfect for carding between coats when rust bluing, or when using the Hot Water Method with Dicropan IM Bluing Solution. Won't remove metal, or give "satin" look.
SPECS: 6" (15.2cm) diameter wheels available in 2 row and 4 row. .0025" diameter stainless steel wire. Staggered rows of 1-3⁄4" (4.44cm) long, tufted bristles. 1⁄4" (6.35mm) hole through 2" (51mm) diameter wood center (drill to fit). 2 row has ½" (13mm) wide face. 4 row has 1-1⁄4" (32mm) wide face. Maximum RPM 3500.
Plus...
Roue de "Cardage" Super-Douce Pour Brunissage/Rust/IM À Prix Économique
Trouvés pour nous par Ray Hall, Griffith, IN, ces roues en fil doux comme un bébé sont parfaites pour le cardage entre les couches lors du brunissage à l'oxyde de fer, ou lors de l'utilisation de la méthode à l'eau chaude avec la solution de brunissage Dicropan IM. Elles ne retireront pas de métal et ne donneront pas un aspect "satiné".
SPÉCIFICATIONS : Roues de 6" (15,2 cm) de diamètre disponibles en 2 rangées et 4 rangées. Fil en acier inoxydable de .0025" de diamètre. Rangées décalées de 1-3⁄4" (4,44 cm) de long, poils touffus. Trou de 1⁄4" (6,35 mm) à travers un centre en bois de 2" (51 mm) de diamètre (percer pour adapter). La version à 2 rangées a une face de ½" (13 mm) de large. La version à 4 rangées a une face de 1-1⁄4" (32 mm) de large. RPM maximum 3500.
Plus...
Évaluations client de GROBET FILE CO. OF AMERICA INC 2 ROW SUPER-SOFT CARDING WHEEL
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 5
Great Product(21.12.2010)
Works great, I just ran a long bolt though it to fabricate an an arbor and chucked it up in my drill press and it does a fantastic job as a carding wheel. Very nicely made for the money and perfect for the job.
Great Item for Rust Blueing(21.03.2011)
I used this to card my double shotgun barrels after rust bluing. Brush has a 1/4 arbor hole, so I just put a long bolt on it and chucked it up in the drill press at about 500 rpm. Really cuts down on time and leaves a great finish. This is baby soft. Almost impossible to overpolish.
If you're rust bluing on the cheap - this is the one thing worth splurging on.
Essential for Slow Rust Blueing(01.04.2011)
The bristles on this wheel are so fine they feel like a paint brush. It is perfect for carding the soft oxidation formed from the boiling steps of original Slow Rust Blueing. I set mine up in a drill press so I can have lots of room to move around and a slow speed that's impossible with a buffer or grinder motor. It works beautifully.
This makes "Slow Rust Blueing" a little(04.12.2011)
I slow rust blue all my projects. This product speeds it up some. It is very soft and does a great job of carding and leaving a very even finish. Highly recommend this product!!!!
Perfect(17.02.2014)
This is the carding wheel to buy for great results. The finish it produces is beautiful!
Perfect, Thanks Brownells(08.05.2018)
I use this everyday with Pilkingtons. Well made, perfect for rust bluing and it doesn't' cost a ton. Run it slow, high speed buffer/grinder will ruin it and your work.
I didn't want to put it in my drill press because i wanted a vertical spin not horizontal which is more comfortable for me and works better for long guns. So I put a long bolt through it, chucked in a 3/8 drill, and clamped the drill in a vice. A wire tie on the trigger to give the speed I want and I have made a couple thousand dollars with it. Buying another one right now.
Works great for rust bluing(02.01.2011)
My first attempt at rust bluing involved an 1895 Colt New Navy revolver. This carding wheel turned the rough black finish that emerged from the rusting and boiling steps into a beautiful finish. The wire bristles are tough enough to remove the rough black, but soft enough to polish without scratching.