Compact Shape Is Faster To Hit; Won't Get In The Way
Extends half an inch farther out than the "flush" factory release so it's easier to hit and operate when you're in a hurry to change magazines. Thin, compact shape won't poke you in the back if you carry your rifle in a sling. Installs without gunsmithing.
SPECS: CM steel, blue, matte finish. Extends .430" (11mm) from bottom of receiver.
Plus...
La forme compacte est plus rapide à atteindre ; ne te gêne pas
S'étend d'un pouce et demi plus loin que le relâchement d'origine "affleurant", ce qui le rend plus facile à atteindre et à utiliser quand tu es pressé de changer de chargeur. Sa forme fine et compacte ne te gênera pas dans le dos si tu portes ton fusil en bandoulière. S'installe sans besoin d'un armurier.
CARACTÉRISTIQUES : Acier CM, finition bleue mate. S'étend de .430" (11mm) depuis le bas du récepteur.
Plus...
Évaluations client de RANCH PRODUCTS BLUE EXTENDED MAG RELEASE
Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4.3
10/22 SS Ext. Mag Release(02.10.2011)
Firstly, easy to install. Ejects magazines without effort. However, the corners are sure to poke you pretty hard. It could use some buffing out because if you look at the photo, which I didn't, there are a lot of tool marks. But you won't see it once it's installed but I can see what looks like a cracks or other squiggy looking folds. Is this part a casting poured from a mold?
Work's great(10.04.2010)
Installs easy, works goood, just a flick of your finger and the mag. drops. Good product and the price is right.
Size is decieving(28.08.2010)
When I first recieved this part I was dissapointed because it was smaller than the original mag release, but once I installed it I noticed that it was much easier and less finicky than the original.
Very good for older 10/22's(10.09.2010)
Older 10/22's need these releases. Maybe that's why new ones come with similar ones installed?
Only one problem: The description said it is blued, but mine is parkerized. Not a problem, but (barely) worth noting. Parkerized steel is more rust-resistant than blued.
Working as expected(02.02.2011)
Easy to install and works like expected.
vast improvement over stock mag. release(18.06.2011)
This mag release is a great improvement to the stock mag release that is flush with the rifle. Easy installation, better feel than polymer.
Greatly eases releasing a magazine(19.10.2011)
Factory magazine release was stiff and did not drop the magazine easily, had to get a good grip on the magazine and pull or flip it out with a screw driver/car key. This magazine release is as easy as pushing the lever with a knuckle and the magazine will drop free. Basically how the factory release should be, I highly recommend this to anyone with a 10/22.
Great product!(13.06.2012)
It took longer to break the rifle down than it did to install this part. This was a nice addition to 1993 10/22 that had the flush magazine release. No issues now releasing magazines in my 10/22.
Great design, will last a lifetime(04.01.2014)
All steel, dimensionally perfect for hi-cap magazines. This is the only mag catch that I tried to accommodate the Pro-Mag Archangel Nomad magzine with sleeve, except the vintage Eagle polymer magazine catch of the 1980's. I would have given it a 5-star if the part has been serrated for non-slip operation and aesthetics. I have added a 20 l.p.i. on the paddle and it work even better and looks phenomenal. Excellent price tag.
What was looking for(29.11.2016)
Looking for one like for some years now for my Oct 1994 model 10/22 , easy to install , works perfect, does not get bumped , easy to work, even looks factory
Much needed upgrade(20.02.2017)
Solid replacement for the flimsy plastic and far too small original release.
Easy to swap out and SOLID.
Only gripe is the edge seeing that the mag release and bolt release are in tight quarters. The edges are not sharp per say but would serve tiny and weaker hands much better to be rounded out. I am not a small shooter nor have weak hands and this is an annoyance for me.
A side note, I will never buy Ruger again!!!! the "need" for this product and others on the 10-22 are ridiculous. The 10-22 is supposed to be one of the most reliable platforms in existance and was purchaed for a new shooter. I have had to perform more modifications and cleaning up from a lack of proper fit or finish due to Ruger manufacturing.
Works well, but dimensions are small.(05.09.2018)
Good quality and very sturdy. It functions very well, not too long and not too short. My only issue is the dimensions are on the small side, making the part sit loosely in the trigger. It even rattles. Even when a magazine is inserted it will rattle. This could give away your position if your sneaking up on game. Other than that it works.
Référence: 746122100 RANCH PRODUCTS BLUE EXTENDED MAG RELEASE Ref Fabricant: NONE S'étend d'un pouce et demi plus loin que le relâchement d'origine "affleurant", ce qui le rend plus facile à atteindre et à utiliser quand tu es pressé de changer de chargeur. Sa forme fine et compacte ne te gênera pas dans le dos si tu portes ton fusil en bandoulière. S'installe sans besoin d'un armurier.
39.9CHF35CHF 39.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Améliore ton expérience avec le 10/22® Extended Magazine Release 🚀. Facile à atteindre et sans besoin d'armurier pour l'installation.
Compact Shape Is Faster To Hit; Won't Get In The Way
Extends half an inch farther out than the "flush" factory release so it's easier to hit and operate when you're in a hurry to change magazines. Thin, compact shape won't poke you in the back if you carry your rifle in a sling. Installs without gunsmithing.
SPECS: CM steel, blue, matte finish. Extends .430" (11mm) from bottom of receiver.
Plus...
La forme compacte est plus rapide à atteindre ; ne te gêne pas
S'étend d'un pouce et demi plus loin que le relâchement d'origine "affleurant", ce qui le rend plus facile à atteindre et à utiliser quand tu es pressé de changer de chargeur. Sa forme fine et compacte ne te gênera pas dans le dos si tu portes ton fusil en bandoulière. S'installe sans besoin d'un armurier.
CARACTÉRISTIQUES : Acier CM, finition bleue mate. S'étend de .430" (11mm) depuis le bas du récepteur.
Plus...
Évaluations client de RANCH PRODUCTS BLUE EXTENDED MAG RELEASE
Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4.3
10/22 SS Ext. Mag Release(02.10.2011)
Firstly, easy to install. Ejects magazines without effort. However, the corners are sure to poke you pretty hard. It could use some buffing out because if you look at the photo, which I didn't, there are a lot of tool marks. But you won't see it once it's installed but I can see what looks like a cracks or other squiggy looking folds. Is this part a casting poured from a mold?
Work's great(10.04.2010)
Installs easy, works goood, just a flick of your finger and the mag. drops. Good product and the price is right.
Size is decieving(28.08.2010)
When I first recieved this part I was dissapointed because it was smaller than the original mag release, but once I installed it I noticed that it was much easier and less finicky than the original.
Very good for older 10/22's(10.09.2010)
Older 10/22's need these releases. Maybe that's why new ones come with similar ones installed?
Only one problem: The description said it is blued, but mine is parkerized. Not a problem, but (barely) worth noting. Parkerized steel is more rust-resistant than blued.
Working as expected(02.02.2011)
Easy to install and works like expected.
vast improvement over stock mag. release(18.06.2011)
This mag release is a great improvement to the stock mag release that is flush with the rifle. Easy installation, better feel than polymer.
Greatly eases releasing a magazine(19.10.2011)
Factory magazine release was stiff and did not drop the magazine easily, had to get a good grip on the magazine and pull or flip it out with a screw driver/car key. This magazine release is as easy as pushing the lever with a knuckle and the magazine will drop free. Basically how the factory release should be, I highly recommend this to anyone with a 10/22.
Great product!(13.06.2012)
It took longer to break the rifle down than it did to install this part. This was a nice addition to 1993 10/22 that had the flush magazine release. No issues now releasing magazines in my 10/22.
Great design, will last a lifetime(04.01.2014)
All steel, dimensionally perfect for hi-cap magazines. This is the only mag catch that I tried to accommodate the Pro-Mag Archangel Nomad magzine with sleeve, except the vintage Eagle polymer magazine catch of the 1980's. I would have given it a 5-star if the part has been serrated for non-slip operation and aesthetics. I have added a 20 l.p.i. on the paddle and it work even better and looks phenomenal. Excellent price tag.
What was looking for(29.11.2016)
Looking for one like for some years now for my Oct 1994 model 10/22 , easy to install , works perfect, does not get bumped , easy to work, even looks factory
Much needed upgrade(20.02.2017)
Solid replacement for the flimsy plastic and far too small original release.
Easy to swap out and SOLID.
Only gripe is the edge seeing that the mag release and bolt release are in tight quarters. The edges are not sharp per say but would serve tiny and weaker hands much better to be rounded out. I am not a small shooter nor have weak hands and this is an annoyance for me.
A side note, I will never buy Ruger again!!!! the "need" for this product and others on the 10-22 are ridiculous. The 10-22 is supposed to be one of the most reliable platforms in existance and was purchaed for a new shooter. I have had to perform more modifications and cleaning up from a lack of proper fit or finish due to Ruger manufacturing.
Works well, but dimensions are small.(05.09.2018)
Good quality and very sturdy. It functions very well, not too long and not too short. My only issue is the dimensions are on the small side, making the part sit loosely in the trigger. It even rattles. Even when a magazine is inserted it will rattle. This could give away your position if your sneaking up on game. Other than that it works.
Aide et contact
Newsletter
Vue classique
Vue mobile