Compact Shape Is Faster To Hit; Won't Get In The Way
Extends half an inch farther out than the "flush" factory release so it's easier to hit and operate when you're in a hurry to change magazines. Thin, compact shape won't poke you in the back if you carry your rifle in a sling. Installs without gunsmithing.
SPECS: CM steel, blue, matte finish. Extends .430" (11mm) from bottom of receiver.
Altro...
La Forma Compatta È Più Facile Da Colpire; Non Si Intromette
Si estende di mezzo pollice più lontano rispetto al rilascio "flush" di fabbrica, rendendo più facile colpirlo e utilizzarlo quando sei di fretta per cambiare i caricatori. La forma sottile e compatta non ti infastidisce nella schiena se porti il tuo fucile in una tracolla. Si installa senza necessità di armeggiare.
SPECIFICHE: Acciaio CM, finitura blu, opaca. Estende .430" (11mm) dalla parte inferiore del ricevitore.
Altro...
Punteggi dei clienti per RANCH PRODUCTS BLUE EXTENDED MAG RELEASE
Numero di punteggi: 12
Da brownells.com: 12
Punteggio medio: 4.3
10/22 SS Ext. Mag Release(02.10.2011)
Firstly, easy to install. Ejects magazines without effort. However, the corners are sure to poke you pretty hard. It could use some buffing out because if you look at the photo, which I didn't, there are a lot of tool marks. But you won't see it once it's installed but I can see what looks like a cracks or other squiggy looking folds. Is this part a casting poured from a mold?
Work's great(10.04.2010)
Installs easy, works goood, just a flick of your finger and the mag. drops. Good product and the price is right.
Size is decieving(28.08.2010)
When I first recieved this part I was dissapointed because it was smaller than the original mag release, but once I installed it I noticed that it was much easier and less finicky than the original.
Very good for older 10/22's(10.09.2010)
Older 10/22's need these releases. Maybe that's why new ones come with similar ones installed?
Only one problem: The description said it is blued, but mine is parkerized. Not a problem, but (barely) worth noting. Parkerized steel is more rust-resistant than blued.
Working as expected(02.02.2011)
Easy to install and works like expected.
vast improvement over stock mag. release(18.06.2011)
This mag release is a great improvement to the stock mag release that is flush with the rifle. Easy installation, better feel than polymer.
Greatly eases releasing a magazine(19.10.2011)
Factory magazine release was stiff and did not drop the magazine easily, had to get a good grip on the magazine and pull or flip it out with a screw driver/car key. This magazine release is as easy as pushing the lever with a knuckle and the magazine will drop free. Basically how the factory release should be, I highly recommend this to anyone with a 10/22.
Great product!(13.06.2012)
It took longer to break the rifle down than it did to install this part. This was a nice addition to 1993 10/22 that had the flush magazine release. No issues now releasing magazines in my 10/22.
Great design, will last a lifetime(04.01.2014)
All steel, dimensionally perfect for hi-cap magazines. This is the only mag catch that I tried to accommodate the Pro-Mag Archangel Nomad magzine with sleeve, except the vintage Eagle polymer magazine catch of the 1980's. I would have given it a 5-star if the part has been serrated for non-slip operation and aesthetics. I have added a 20 l.p.i. on the paddle and it work even better and looks phenomenal. Excellent price tag.
What was looking for(29.11.2016)
Looking for one like for some years now for my Oct 1994 model 10/22 , easy to install , works perfect, does not get bumped , easy to work, even looks factory
Much needed upgrade(20.02.2017)
Solid replacement for the flimsy plastic and far too small original release.
Easy to swap out and SOLID.
Only gripe is the edge seeing that the mag release and bolt release are in tight quarters. The edges are not sharp per say but would serve tiny and weaker hands much better to be rounded out. I am not a small shooter nor have weak hands and this is an annoyance for me.
A side note, I will never buy Ruger again!!!! the "need" for this product and others on the 10-22 are ridiculous. The 10-22 is supposed to be one of the most reliable platforms in existance and was purchaed for a new shooter. I have had to perform more modifications and cleaning up from a lack of proper fit or finish due to Ruger manufacturing.
Works well, but dimensions are small.(05.09.2018)
Good quality and very sturdy. It functions very well, not too long and not too short. My only issue is the dimensions are on the small side, making the part sit loosely in the trigger. It even rattles. Even when a magazine is inserted it will rattle. This could give away your position if your sneaking up on game. Other than that it works.
N. prodotto: 746122100 RANCH PRODUCTS BLUE EXTENDED MAG RELEASE Parti Fabbricante: NONE Si estende di mezzo pollice più lontano rispetto al rilascio "flush" di fabbrica, rendendo più facile colpirlo e utilizzarlo quando sei di fretta per cambiare i caricatori. La forma sottile e compatta non ti infastidisce nella schiena se porti il tuo fucile in una tracolla. Si installa senza necessità di armeggiare.
39.9CHF24CHF 39.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Si estende di mezzo pollice più lontano rispetto al rilascio "a filo" di fabbrica, facilitando il cambio dei caricatori.
La forma sottile e compatta non crea fastidi quando si porta il fucile in una tracolla.
Installazione semplice senza bisogno di un armaiolo.
Caratteristiche
Adatto per:
Ruger
Modello:
10/22
Peso della spedizione: 0.023kgAltezza di spedizione: 13mmLarghezza di spedizione: 18mmLunghezza di spedizione: 94mm
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Rendi il tuo 10/22® più pratico con il rilascio esteso di RANCH PRODUCTS. 🔧 Facile da installare e perfetto per il cambio rapido dei caricatori.
Compact Shape Is Faster To Hit; Won't Get In The Way
Extends half an inch farther out than the "flush" factory release so it's easier to hit and operate when you're in a hurry to change magazines. Thin, compact shape won't poke you in the back if you carry your rifle in a sling. Installs without gunsmithing.
SPECS: CM steel, blue, matte finish. Extends .430" (11mm) from bottom of receiver.
Altro...
La Forma Compatta È Più Facile Da Colpire; Non Si Intromette
Si estende di mezzo pollice più lontano rispetto al rilascio "flush" di fabbrica, rendendo più facile colpirlo e utilizzarlo quando sei di fretta per cambiare i caricatori. La forma sottile e compatta non ti infastidisce nella schiena se porti il tuo fucile in una tracolla. Si installa senza necessità di armeggiare.
SPECIFICHE: Acciaio CM, finitura blu, opaca. Estende .430" (11mm) dalla parte inferiore del ricevitore.
Altro...
Punteggi dei clienti per RANCH PRODUCTS BLUE EXTENDED MAG RELEASE
Numero di punteggi: 12
Da brownells.com: 12
Punteggio medio: 4.3
10/22 SS Ext. Mag Release(02.10.2011)
Firstly, easy to install. Ejects magazines without effort. However, the corners are sure to poke you pretty hard. It could use some buffing out because if you look at the photo, which I didn't, there are a lot of tool marks. But you won't see it once it's installed but I can see what looks like a cracks or other squiggy looking folds. Is this part a casting poured from a mold?
Work's great(10.04.2010)
Installs easy, works goood, just a flick of your finger and the mag. drops. Good product and the price is right.
Size is decieving(28.08.2010)
When I first recieved this part I was dissapointed because it was smaller than the original mag release, but once I installed it I noticed that it was much easier and less finicky than the original.
Very good for older 10/22's(10.09.2010)
Older 10/22's need these releases. Maybe that's why new ones come with similar ones installed?
Only one problem: The description said it is blued, but mine is parkerized. Not a problem, but (barely) worth noting. Parkerized steel is more rust-resistant than blued.
Working as expected(02.02.2011)
Easy to install and works like expected.
vast improvement over stock mag. release(18.06.2011)
This mag release is a great improvement to the stock mag release that is flush with the rifle. Easy installation, better feel than polymer.
Greatly eases releasing a magazine(19.10.2011)
Factory magazine release was stiff and did not drop the magazine easily, had to get a good grip on the magazine and pull or flip it out with a screw driver/car key. This magazine release is as easy as pushing the lever with a knuckle and the magazine will drop free. Basically how the factory release should be, I highly recommend this to anyone with a 10/22.
Great product!(13.06.2012)
It took longer to break the rifle down than it did to install this part. This was a nice addition to 1993 10/22 that had the flush magazine release. No issues now releasing magazines in my 10/22.
Great design, will last a lifetime(04.01.2014)
All steel, dimensionally perfect for hi-cap magazines. This is the only mag catch that I tried to accommodate the Pro-Mag Archangel Nomad magzine with sleeve, except the vintage Eagle polymer magazine catch of the 1980's. I would have given it a 5-star if the part has been serrated for non-slip operation and aesthetics. I have added a 20 l.p.i. on the paddle and it work even better and looks phenomenal. Excellent price tag.
What was looking for(29.11.2016)
Looking for one like for some years now for my Oct 1994 model 10/22 , easy to install , works perfect, does not get bumped , easy to work, even looks factory
Much needed upgrade(20.02.2017)
Solid replacement for the flimsy plastic and far too small original release.
Easy to swap out and SOLID.
Only gripe is the edge seeing that the mag release and bolt release are in tight quarters. The edges are not sharp per say but would serve tiny and weaker hands much better to be rounded out. I am not a small shooter nor have weak hands and this is an annoyance for me.
A side note, I will never buy Ruger again!!!! the "need" for this product and others on the 10-22 are ridiculous. The 10-22 is supposed to be one of the most reliable platforms in existance and was purchaed for a new shooter. I have had to perform more modifications and cleaning up from a lack of proper fit or finish due to Ruger manufacturing.
Works well, but dimensions are small.(05.09.2018)
Good quality and very sturdy. It functions very well, not too long and not too short. My only issue is the dimensions are on the small side, making the part sit loosely in the trigger. It even rattles. Even when a magazine is inserted it will rattle. This could give away your position if your sneaking up on game. Other than that it works.
Aiuto e contatti
Newsletter
Visualizzazione classica
Visualizzazione mobile