Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 399 CHF

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

ALANGATOR.
10/22® TRIMAG MAGAZINE COUPLER

736211949219 100005354

Clamps Together Three Factory Magazines For Fast Reloads

Low-profile, molded polymer coupler clamps together three factory 10/22® magazines to put 30 rounds at your fingertips for super-fast reloads without fumbling for the next mag. More economical and less bulky than high-cap “banana” magazines, and easy to use. Slide the mags onto the TriMag and secure them by tightening the stainless steel crossbolt with a slot-head screwdriver or even a coin. Loosen the bolt to release the magazines for single use again. Get the Ruger® 10/22® Trimag Pouch.

SPECS: Polymer, matte black. Approximately 1¾" (4.5cm) long, 1½" (3.8cm) wide. 1 oz. (69g) wt.

Plus...

Maintient ensemble trois chargeurs d'origine pour des rechargements rapides

Le coupler en polymère à profil bas maintient ensemble trois chargeurs 10/22® d'origine pour avoir 30 cartouches à portée de main, permettant des rechargements ultra-rapides sans chercher le prochain chargeur. Plus économique et moins encombrant que les chargeurs « banane » à grande capacité, et facile à utiliser. Glisse les chargeurs sur le TriMag et fixe-les en serrant le boulon en acier inoxydable avec un tournevis à fente ou même une pièce de monnaie. Desserre le boulon pour libérer les chargeurs pour une utilisation individuelle à nouveau. Obtiens le sac Trimag Ruger® 10/22®.

SPÉCIFICATIONS : Polymer, noir mat. Environ 1¾" (4,5 cm) de long, 1½" (3,8 cm) de large. 1 oz. (69 g) poids.

Plus...

Évaluations client de ALANGATOR. TRIMAG 10/22® MAG COUPLER

Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4.8

Great idea (15.06.2010)

Love these things. Unlike other coupler products, this one does not require any glue and holds the mags conveniently. A+

Good mag coupler (09.09.2010)

Holds mags together positively. Goes together and comes apart with a flat-head screwdriver, which is needed to strip the 10/22 anyway. No glue or tape needed.

The only downside is the screw in the middle is aluminum, but then again, you aren't supposed to over-tighten it, so it's a non-issue.

TriMag Coupler in Competition (08.11.2010)

I used the TriMag at the 2010 Ruger Rimfire Championships. I normally shoot competition pistol, but I was talked into buying a 10/22 and shooting this match by a friend. As the match had a 10 round limit for magazines, the TriMag turned out to be the way to go for fast reloads. In addition to the fast reloads, the setup allows the system acts like a tripod. I was able to set the rifle on a barrel in an upright position for a fast start when the buzzer went off, no tripod needed. Cool stuff!

Dang it, now I'm hooked! I plan on getting several more as backups!

Flawless (02.02.2011)

Theres almost nothing to complain about, the only thing is the colour of the screw.

Very good and an excellent idea but... (18.03.2011)

Good stuff just wish they made a 2 magazine version.
the only bad thing I can say about them is that they interfer with the Buttlercreek foldingstock.
so it is not possible to have it folded while the magazine with the coupler are inserted to the gun.

but other then that superb!

Works GREAT. Condense your 10rnd Mags. (07.07.2011)

I purchased 1 of these to try, and once I had it at the range I decided to buy 6 more. I've been filling a box with my 10rnd Ruger Mags over the years and these are a GREAT way to condense those magazines into a usable product again. The 3 mags combined don't hang as low as a single 26rnd Ruger or Butler Creek Mag. I find these a valuable addition to any 10/22, 77/22 or 96/22 Shooter with a pile of old factory mags.

Outstanding Product (16.07.2011)

This has got to be one of the best new products to hit the market in recent years. Outstanding guality, fair price and ease of use. I cannot say enough to praise this item. JUST BUY IT.

30 rounds and no banana mag! (09.08.2011)

I purchased to use with a bi-pod. I Recommend an extended mag release to aid with ease of re-charging rifle.

No High Capacity Troubles! (02.02.2012)

Works great and is especially good for those of you who live in states which restrict high capacity magazines. :)

Snug fit (06.05.2012)

Connects and holds together up to three standard 10-round Ruger hot-lips mags. Gives you 30 rouns capacity but doesn't protrude as far down as a std 30 round mag. Great for benchrest shooting

Good product (24.04.2014)

Just received this today. While I haven't shot my 10/22 utilizing it, there isn't much that can go wrong with it, and I really like the concept. This is a very secure platform for 3 mags and I have no doubts that it will perform as advertised. I don't have anything negative to say about this product, buy it!

Clever idea (22.09.2015)

This is the second TriMag I order. It holds the mags very securely plus makes it easier to manipulate in and out of the magazine well. Well thought out, well made product. It allows for 30 rounds without sticking out like the 25 round banana magazines. Makes a difference when shooting off short bipod.

BTW, it is the second because I bought more mags, first one is still holding out well.

Luisyamaha

Lire 12 plus d'avis sur brownells.com

33.9 33.9 1 CHF

Référence: 100005354
ALANGATOR. TRIMAG 10/22® MAG COUPLER
Ref Fabricant: NONE 736211949219 Le coupler en polymère à profil bas maintient ensemble trois chargeurs 10/22® d'origine pour avoir 30 cartouches à portée de main, permettant des rechargements ultra-rapides sans chercher le prochain chargeur. Plus économique et moins encombrant que les chargeurs « banane » à grande capacité, et facile à utiliser. Glisse les chargeurs sur le TriMag et fixe-les en serrant le boulon en acier inoxydable avec un tournevis à fente ou même une pièce de monnaie. Desserre le boulon pour libérer les chargeurs pour une utilisation individuelle à nouveau. Obtiens le sac Trimag Ruger® 10/22®.

33.9 CHF 25 CHF 33.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Couleur: Noir Manufacture: Ruger Modèle: 10/22

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Fixe ensemble trois chargeurs 10/22® pour avoir 30 cartouches à portée de main.
Facile à utiliser : glisse les chargeurs sur le TriMag et sécurise-les avec un boulon.
Plus économique et moins encombrant que les chargeurs haute capacité « banane ».

Caractéristiques

Couleur: Noir Manufacture: Ruger Modèle: 10/22 Poids du colis: 0.023kg Hauteur d'expédition: 38mm Largeur d'expédition: 46mm Longueur d'expédition: 66mm UPC : 736211949219

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x

Optimise tes rechargements avec le coupler TRIMAG 10/22® ! 🚀 Prends 30 cartouches à portée de main et recharge sans effort.

Clamps Together Three Factory Magazines For Fast Reloads

SPECS: Polymer, matte black. Approximately 1¾" (4.5cm) long, 1½" (3.8cm) wide. 1 oz. (69g) wt.

Plus...

Maintient ensemble trois chargeurs d'origine pour des rechargements rapides

SPÉCIFICATIONS : Polymer, noir mat. Environ 1¾" (4,5 cm) de long, 1½" (3,8 cm) de large. 1 oz. (69 g) poids.

Plus...

Évaluations client de ALANGATOR. TRIMAG 10/22® MAG COUPLER

Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4.8

Great idea (15.06.2010)

Love these things. Unlike other coupler products, this one does not require any glue and holds the mags conveniently. A+

Good mag coupler (09.09.2010)

TriMag Coupler in Competition (08.11.2010)

Flawless (02.02.2011)

Theres almost nothing to complain about, the only thing is the colour of the screw.

Very good and an excellent idea but... (18.03.2011)

Works GREAT. Condense your 10rnd Mags. (07.07.2011)

Outstanding Product (16.07.2011)

This has got to be one of the best new products to hit the market in recent years. Outstanding guality, fair price and ease of use. I cannot say enough to praise this item. JUST BUY IT.

30 rounds and no banana mag! (09.08.2011)

I purchased to use with a bi-pod. I Recommend an extended mag release to aid with ease of re-charging rifle.

No High Capacity Troubles! (02.02.2012)

Works great and is especially good for those of you who live in states which restrict high capacity magazines. :)

Snug fit (06.05.2012)

Connects and holds together up to three standard 10-round Ruger hot-lips mags. Gives you 30 rouns capacity but doesn't protrude as far down as a std 30 round mag. Great for benchrest shooting

Good product (24.04.2014)