QD Stud with one 7⁄8" machine screw and nut, one ¾" wood screw. Plated looks right on stainless guns.
Altro...
QD Stud con una vite da 7⁄8" e dado, una vite da ¾" per legno. La finitura placcata si abbina perfettamente alle armi in acciaio inossidabile.
Altro...
Punteggi dei clienti per BROWNELLS BLUE SWIVEL PARTS SET
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 5
An ideal (& inexpensive) swivel post set(02.08.2012)
Let's face it folks, there are rifles out there have have virtually no front and rear swivel posts at all. In my case, I purchased an Auto Ordnance M1 30 Cal Carbine with a tactical folding stock arrangement and I wanted to add a bipod (which I couldn't at this point).
But alas, this particular rifle had no swivel posts at all. So what to do? After carefully searching the internet, I stumbled upon this unique set on Brownells website and ordered several sets (they are very inexpensive). Wallaaaaa....swivel post problem eliminated!
All I did was drill a small hole (centered) under the front portion of the stock and then worked in one of the screw posts - it was too easy and took all but 3 or 5 minutes total to get it done. No damage was done to any part of the rifle.
Then I added a picatinny rail mount adapter that is designed to fit over the front swivel post, and I then connected a bipod over the picatinny rail. Boy, talk about convenience.
I think I may ordered a dozen more of these little sets because they really come in handy - especially when you least expect it as in the case of long guns that have no swivel posts at all (and don't have picatinny arrangements underneath - such as many bolt action rifles on the market).
N. prodotto: 080000008 BROWNELLS BLUE SWIVEL PARTS SET050806004955 QD Stud con una vite da 7⁄8" e dado, una vite da ¾" per legno. La finitura placcata si abbina perfettamente alle armi in acciaio inossidabile.
9.9CHF26CHF 9.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
QD Stud with one 7⁄8" machine screw and nut, one ¾" wood screw. Plated looks right on stainless guns.
Altro...
QD Stud con una vite da 7⁄8" e dado, una vite da ¾" per legno. La finitura placcata si abbina perfettamente alle armi in acciaio inossidabile.
Altro...
Punteggi dei clienti per BROWNELLS BLUE SWIVEL PARTS SET
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 5
An ideal (& inexpensive) swivel post set(02.08.2012)
Let's face it folks, there are rifles out there have have virtually no front and rear swivel posts at all. In my case, I purchased an Auto Ordnance M1 30 Cal Carbine with a tactical folding stock arrangement and I wanted to add a bipod (which I couldn't at this point).
But alas, this particular rifle had no swivel posts at all. So what to do? After carefully searching the internet, I stumbled upon this unique set on Brownells website and ordered several sets (they are very inexpensive). Wallaaaaa....swivel post problem eliminated!
All I did was drill a small hole (centered) under the front portion of the stock and then worked in one of the screw posts - it was too easy and took all but 3 or 5 minutes total to get it done. No damage was done to any part of the rifle.
Then I added a picatinny rail mount adapter that is designed to fit over the front swivel post, and I then connected a bipod over the picatinny rail. Boy, talk about convenience.
I think I may ordered a dozen more of these little sets because they really come in handy - especially when you least expect it as in the case of long guns that have no swivel posts at all (and don't have picatinny arrangements underneath - such as many bolt action rifles on the market).