Curved shape drops the pistol deeper into the hand and lowers the line of sight for less felt recoil and a faster pointing gun. Wide beavertail shape prevents the hammer from "bit-ing" the web of the hand. Palmswell"! model fea- tures a raised pad that maintains constant hand contact for the shooter using a high thumb hold.
SPECS: Steel, matte BLUE or satin stainless (S/S). .866" (22mm) from rear of hole to tip. Available Standard or Palmswell. Series 70 or 80. .250" radius requires alteration to frame.
Altro...
Abbassa La Linea Di Mira Della Pistola Nella Tua Mano
La forma curva fa sì che la pistola si posizioni più in profondità nella mano e abbassa la linea di mira per una minore percezione del rinculo e una mira più rapida. La forma ampia del beavertail previene che il cane "morda" il palmo della mano. Il modello "Palmswell" presenta un pad rialzato che mantiene un contatto costante con la mano per il tiratore che utilizza una presa alta con il pollice.
SPECS: Acciaio, finitura BLU o satinato in acciaio inossidabile (S/S). .866" (22mm) dalla parte posteriore del foro alla punta. Disponibile in Standard o Palmswell. Serie 70 o 80. .250" di raggio richiede modifica al telaio.
Altro...
Punteggi dei clienti per SMITH & ALEXANDER SERIES 70, STANDARD HI-GRIP SAFETY, BLUE
Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 4.1
Well made!(07.07.2010)
Good product, nice finish. Just be sure that you understand that it will still need to be fitted internally.
Nice safety(10.01.2011)
This is a well made part that replaced the OEM on a Colt Combat Elite XSE. The arm needed fitting, otherwise, it dropped right it. The palmswell is necessary for me because I shoot with my thumb on top of safety. It disengages positively and is very comfortable.
Great Product.(30.05.2012)
Product is exactly as described, i suggest getting the jig for it as it makes fitting alot quicker. you still need to fit and shape the finger on the saftey to make sure it engages properly. but with the jig you get the bulk of the work out quicker. i like this product and i would recommend to anyone.
Smith & Alexander grip safety(03.03.2017)
I have fitted many safeties on the 1911s. however this seemed to be the hardest one I have had to do. I bought two for two different 1911 I was working on one was a cheap Philipino model the other was a Colt . and I had the same issues with both. I would not recommend this product unless you like to struggle.
Nice Addition(25.10.2010)
Used on a "scratch built" Government Model on an (iffy?) SS Essex frame. Fitted to frame using S&A's installation jig (Brownell's #849-007-000). Took some fitting to "blend" the contours to frame, but I couldn't be happier with the results. Also requires fitting to get correct safety block at end of trigger bow, so be aware of this.
Good-Bye hammer bite.(13.02.2011)
Installed this on a Springfield GI model. Used the S&A jig which worked very well. It was harder to grind the frame than I thought it would be, but I'm not a gunsmith and was using a dremel tool with a carbide bit. It turned out very well though and was well worth the effort; stopping the hamner bite and looking great. Of course you will need to replace the spur hammer too.
beaver tail for my GI(29.05.2011)
By the jig to keep the angles correct, with the jig it took about an hour to reshape the frame, blend it in and reinstall. I am not a gunsmith ,but am a fair hand with tools. The fitting required for this piece was considerably less than expected. This piece is a slightly shortened beavertail which aids in concealed carry.
Nice eddition to my 70 series Gold Cup(23.03.2015)
Nice finish, Left side needed some grinding on safety and frame. Spent several hours getting the sear clearance correct.
Hammer groove was perfect for a commander hammer.
Check out some U-Tube video's if you haven't done this before.
gsg 1911(04.05.2014)
Bought to Install on GSG 1911 .22 to replicate feel of R1 enhanced. Took some blending on grip and channeling for spring but looked and functioned flawlessly.
Nice grip safety(05.12.2015)
This is my 'go to' grip safety for custom work. It allows for a nice high purchase and requires minimal fitting.
N. prodotto: 849007071 SMITH & ALEXANDER SERIES 70, STANDARD HI-GRIP SAFETY, BLUE La forma curva fa sì che la pistola si posizioni più in profondità nella mano e abbassa la linea di mira per una minore percezione del rinculo e una mira più rapida. La forma ampia del beavertail previene che il cane "morda" il palmo della mano. Il modello "Palmswell" presenta un pad rialzato che mantiene un contatto costante con la mano per il tiratore che utilizza una presa alta con il pollice.
50.5CHF1CHF 50.50
*CHF 59.90
Tempi di consegna circa 2-4 giorni dal magazzino locale.
La forma curva del beavertail migliora il posizionamento della pistola e riduce il rinculo percepito.
Il design ampio impedisce al cane di "mordere" il palmo della mano durante il tiro.
Disponibile in finitura Blu o satinato in acciaio inossidabile, con opzioni Standard o Palmswell.
Caratteristiche
Adatto per:
1911
Finitura:
Blued
Mano:
Destro
Modello:
Government,Commander,Officers
Tipo:
Grip
Peso della spedizione: 0.036kgAltezza di spedizione: 13mmLarghezza di spedizione: 104mmLunghezza di spedizione: 124mm
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Scopri la sicurezza beavertail "E-Z FIT HI-GRIP" per 1911! ✨ Design ergonomico per una presa migliore e mira più rapida. Acquista ora!
Curved shape drops the pistol deeper into the hand and lowers the line of sight for less felt recoil and a faster pointing gun. Wide beavertail shape prevents the hammer from "bit-ing" the web of the hand. Palmswell"! model fea- tures a raised pad that maintains constant hand contact for the shooter using a high thumb hold.
SPECS: Steel, matte BLUE or satin stainless (S/S). .866" (22mm) from rear of hole to tip. Available Standard or Palmswell. Series 70 or 80. .250" radius requires alteration to frame.
Altro...
Abbassa La Linea Di Mira Della Pistola Nella Tua Mano
La forma curva fa sì che la pistola si posizioni più in profondità nella mano e abbassa la linea di mira per una minore percezione del rinculo e una mira più rapida. La forma ampia del beavertail previene che il cane "morda" il palmo della mano. Il modello "Palmswell" presenta un pad rialzato che mantiene un contatto costante con la mano per il tiratore che utilizza una presa alta con il pollice.
SPECS: Acciaio, finitura BLU o satinato in acciaio inossidabile (S/S). .866" (22mm) dalla parte posteriore del foro alla punta. Disponibile in Standard o Palmswell. Serie 70 o 80. .250" di raggio richiede modifica al telaio.
Altro...
Punteggi dei clienti per SMITH & ALEXANDER SERIES 70, STANDARD HI-GRIP SAFETY, BLUE
Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 4.1
Well made!(07.07.2010)
Good product, nice finish. Just be sure that you understand that it will still need to be fitted internally.
Nice safety(10.01.2011)
This is a well made part that replaced the OEM on a Colt Combat Elite XSE. The arm needed fitting, otherwise, it dropped right it. The palmswell is necessary for me because I shoot with my thumb on top of safety. It disengages positively and is very comfortable.
Great Product.(30.05.2012)
Product is exactly as described, i suggest getting the jig for it as it makes fitting alot quicker. you still need to fit and shape the finger on the saftey to make sure it engages properly. but with the jig you get the bulk of the work out quicker. i like this product and i would recommend to anyone.
Smith & Alexander grip safety(03.03.2017)
I have fitted many safeties on the 1911s. however this seemed to be the hardest one I have had to do. I bought two for two different 1911 I was working on one was a cheap Philipino model the other was a Colt . and I had the same issues with both. I would not recommend this product unless you like to struggle.
Nice Addition(25.10.2010)
Used on a "scratch built" Government Model on an (iffy?) SS Essex frame. Fitted to frame using S&A's installation jig (Brownell's #849-007-000). Took some fitting to "blend" the contours to frame, but I couldn't be happier with the results. Also requires fitting to get correct safety block at end of trigger bow, so be aware of this.
Good-Bye hammer bite.(13.02.2011)
Installed this on a Springfield GI model. Used the S&A jig which worked very well. It was harder to grind the frame than I thought it would be, but I'm not a gunsmith and was using a dremel tool with a carbide bit. It turned out very well though and was well worth the effort; stopping the hamner bite and looking great. Of course you will need to replace the spur hammer too.
beaver tail for my GI(29.05.2011)
By the jig to keep the angles correct, with the jig it took about an hour to reshape the frame, blend it in and reinstall. I am not a gunsmith ,but am a fair hand with tools. The fitting required for this piece was considerably less than expected. This piece is a slightly shortened beavertail which aids in concealed carry.
Nice eddition to my 70 series Gold Cup(23.03.2015)
Nice finish, Left side needed some grinding on safety and frame. Spent several hours getting the sear clearance correct.
Hammer groove was perfect for a commander hammer.
Check out some U-Tube video's if you haven't done this before.
gsg 1911(04.05.2014)
Bought to Install on GSG 1911 .22 to replicate feel of R1 enhanced. Took some blending on grip and channeling for spring but looked and functioned flawlessly.
Nice grip safety(05.12.2015)
This is my 'go to' grip safety for custom work. It allows for a nice high purchase and requires minimal fitting.