Solid steel mainspring housings with deep checkering keep the 1911 Auto firmly located in the shooting hand.
SPECS: Blued steel or stainless steel. 2-1/16" (5.23cm) long, .536" (13.6mm) wide. 30 lpi checkering. G/C fits Govt. and Commander frames, OM fits Officers ACP length frames.
Plus...
Poignée entièrement checkered, antidérapante
Les logements de ressort principal en acier massif avec un checkering profond maintiennent le 1911 Auto fermement en place dans la main lors du tir.
SPECS : Acier bleui ou acier inoxydable. Longueur de 2-1/16" (5,23 cm), largeur de .536" (13,6 mm). Checkering de 30 lpi. G/C s'adapte aux cadres Govt. et Commander, OM s'adapte aux cadres de longueur Officers ACP.
Plus...
Évaluations client de WILSON COMBAT BLUE, FLAT (OM)
Nombre d'évaluations: 11
De brownells.com: 11
Note moyenne: 4.7
Great fit(24.08.2010)
This mainspring housing fit my Caspian frame great. The fit was tight, but needed no filing or stoning to fit. Great fit with the internal parts as well.
Nice Product(25.10.2010)
Used in a "scratch built" government model. Fit very well into my (iffy?) Essex frame. Pin hole location was perfect. Solid rail-to-groove fit into frame with no alteration or movement. Cannot see any flaws in the fine, sharp checkering.
Solid(07.12.2011)
Replaced the plastic in my Colt Commander with this. Fit is really good, and solid construction.
Much better than kimber housing(18.06.2015)
I purchased several items including complete spring kit & other Wilson's combat parts such as bullet proof firing pin, bullet proof sear, SS mainspring housing, bullet proof extractor, bullet proof sear spring, several weight recoil springs.
I don't know the 1911 as well as I do the AR and AK so I sent all of my parts to robar to have them NP3+ which has given me excellent performance so they put all of my parts together and I couldn't ask for a better running 1911.
This housing was dropped into a Springfield Lightweight Champion 1911. No modification was necessary, the fit/finish is great.
Fit my Kimber Pro Carry II Perfectly(03.10.2012)
I received my replacement main spring housing today and put it on my Kimber Pro Carry II.
No fitting needed.
Using the appropriate punch sizes I was able to remove the old one and put the new one on with no trouble.
Bottom line: I would recommend this to a friend.
Does NOT fit Kimber Custom II(07.12.2013)
This is a good quality mainspring housing milled form solid bar stock steel, but it DOES NOT just drop in to a Kimber gun. Item is 1/16 to 1/8 inch too tall to fit under grip safety. Will need to be fitted by a professional gunsmith to mill down to fit on gun.
Great product(22.02.2015)
This is a great product as is to be expected with Wilson Combat, especially their Bullet Proof line. It does however need fitting for my Colt Rail Gun. As another reviewer stated, it is just a hair too long to fit. It should be understood that very few parts are actually drop-in on a 1911 and this is not advertised as such, so no need to drop the rating because of it. The part looks and feels great.
Good part(28.09.2016)
Good part, as all of the Wilson Combat parts that I've used in the past are, BUT, like most parts on a 1911, it is not necessarily "Drop-in", although that is what the packaging states. It took about an hours worth of filing and stoning to get the OAL short enough to not bind on the grip safety. Checkering is clean and fine, finish is a matte blue.
Purcahsed for my Colt O1980 XSE (01.01.2017)
No fitting required for my Colt O1980 XSE dropped right in. Tight fit. Replaced the stock poly housing with straight serrations. This Wilson Combat unit feels and looks way better.
Rock Island armory M-S Series commander(24.03.2018)
I love the look and feel of the part, but unfortunately this item does not fit my commander style 1911.
I have a Rock Island 1911 A1 MS (this is a mid size gun from them) with a 4.25" barrel. The housing goes in nice an tight, but i got about an 1/8" or more of it hanging out the bottom before the pin lines up. I'm afraid to have a gunsmith work on it because if it wont work i cant return it.
Référence: 965092003 WILSON COMBAT BLUE, FLAT (OM) Ref Fabricant: 92BFO874218002817 Les logements de ressort principal en acier massif avec un checkering profond maintiennent le 1911 Auto fermement en place dans la main lors du tir.
79.9CHF1CHF 79.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.y.1
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Référence: 965092001 WILSON COMBAT BLUE, FLAT (G/C) Ref Fabricant: 92BF874218002800 Les logements de ressort principal en acier massif avec un checkering profond maintiennent le 1911 Auto fermement en place dans la main lors du tir.
84.9CHF4CHF 84.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.y.1
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Référence: 965092103 WILSON COMBAT STAINLESS, FLAT (OM) Ref Fabricant: 92SFO874218002848 Les logements de ressort principal en acier massif avec un checkering profond maintiennent le 1911 Auto fermement en place dans la main lors du tir.
84.9CHF5CHF 84.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.y.1
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Référence: 965092101 WILSON COMBAT STAINLESS, FLAT (G/C) Ref Fabricant: 92SF874218002831 Les logements de ressort principal en acier massif avec un checkering profond maintiennent le 1911 Auto fermement en place dans la main lors du tir.
84.9CHF0CHF 84.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.y.1
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Découvrez le logement de ressort principal 1911 Wilson Combat ✨, en acier massif avec checkering profond pour une prise optimale lors du tir.
Solid steel mainspring housings with deep checkering keep the 1911 Auto firmly located in the shooting hand.
SPECS: Blued steel or stainless steel. 2-1/16" (5.23cm) long, .536" (13.6mm) wide. 30 lpi checkering. G/C fits Govt. and Commander frames, OM fits Officers ACP length frames.
Plus...
Poignée entièrement checkered, antidérapante
Les logements de ressort principal en acier massif avec un checkering profond maintiennent le 1911 Auto fermement en place dans la main lors du tir.
SPECS : Acier bleui ou acier inoxydable. Longueur de 2-1/16" (5,23 cm), largeur de .536" (13,6 mm). Checkering de 30 lpi. G/C s'adapte aux cadres Govt. et Commander, OM s'adapte aux cadres de longueur Officers ACP.
Plus...
Évaluations client de WILSON COMBAT BLUE, FLAT (OM)
Nombre d'évaluations: 11
De brownells.com: 11
Note moyenne: 4.7
Great fit(24.08.2010)
This mainspring housing fit my Caspian frame great. The fit was tight, but needed no filing or stoning to fit. Great fit with the internal parts as well.
Nice Product(25.10.2010)
Used in a "scratch built" government model. Fit very well into my (iffy?) Essex frame. Pin hole location was perfect. Solid rail-to-groove fit into frame with no alteration or movement. Cannot see any flaws in the fine, sharp checkering.
Solid(07.12.2011)
Replaced the plastic in my Colt Commander with this. Fit is really good, and solid construction.
Much better than kimber housing(18.06.2015)
I purchased several items including complete spring kit & other Wilson's combat parts such as bullet proof firing pin, bullet proof sear, SS mainspring housing, bullet proof extractor, bullet proof sear spring, several weight recoil springs.
I don't know the 1911 as well as I do the AR and AK so I sent all of my parts to robar to have them NP3+ which has given me excellent performance so they put all of my parts together and I couldn't ask for a better running 1911.
This housing was dropped into a Springfield Lightweight Champion 1911. No modification was necessary, the fit/finish is great.
Fit my Kimber Pro Carry II Perfectly(03.10.2012)
I received my replacement main spring housing today and put it on my Kimber Pro Carry II.
No fitting needed.
Using the appropriate punch sizes I was able to remove the old one and put the new one on with no trouble.
Bottom line: I would recommend this to a friend.
Does NOT fit Kimber Custom II(07.12.2013)
This is a good quality mainspring housing milled form solid bar stock steel, but it DOES NOT just drop in to a Kimber gun. Item is 1/16 to 1/8 inch too tall to fit under grip safety. Will need to be fitted by a professional gunsmith to mill down to fit on gun.
Great product(22.02.2015)
This is a great product as is to be expected with Wilson Combat, especially their Bullet Proof line. It does however need fitting for my Colt Rail Gun. As another reviewer stated, it is just a hair too long to fit. It should be understood that very few parts are actually drop-in on a 1911 and this is not advertised as such, so no need to drop the rating because of it. The part looks and feels great.
Good part(28.09.2016)
Good part, as all of the Wilson Combat parts that I've used in the past are, BUT, like most parts on a 1911, it is not necessarily "Drop-in", although that is what the packaging states. It took about an hours worth of filing and stoning to get the OAL short enough to not bind on the grip safety. Checkering is clean and fine, finish is a matte blue.
Purcahsed for my Colt O1980 XSE (01.01.2017)
No fitting required for my Colt O1980 XSE dropped right in. Tight fit. Replaced the stock poly housing with straight serrations. This Wilson Combat unit feels and looks way better.
Rock Island armory M-S Series commander(24.03.2018)
I love the look and feel of the part, but unfortunately this item does not fit my commander style 1911.
I have a Rock Island 1911 A1 MS (this is a mid size gun from them) with a 4.25" barrel. The housing goes in nice an tight, but i got about an 1/8" or more of it hanging out the bottom before the pin lines up. I'm afraid to have a gunsmith work on it because if it wont work i cant return it.