Prevents Recoil Spring Bind; Makes Takedown Easier
Full-length, two piece design fully supports the recoil spring to help the pistol chamber, extract and cycle smoother. Helps prevent spring bind, makes slide takedown fast and simple. Long wearing, shock-resistant head and hardened stainless steel shaft stand up to both competition and duty use.
SPECS: Stainless steel. Includes guide rod plug and 5/32" Allen wrench.
Altro...
Previene il Bloccaggio della Molla di Rinculo; Rende il Smontaggio più Facile
Design a due pezzi a lunghezza completa che supporta completamente la molla di rinculo per aiutare la pistola a camerare, estrarre e cicli in modo più fluido. Aiuta a prevenire il bloccaggio della molla, rendendo la smontaggio della slide veloce e semplice. Testa resistente agli urti e al'usura e albero in acciaio inossidabile temprato resistono sia all'uso in competizione che a quello operativo.
SPECS: Acciaio inossidabile. Include il tappo del guidamolla e una chiave Allen da 5/32".
Altro...
Punteggi dei clienti per ED BROWN TWO PIECE GUIDE ROD FITS GOVT. 5"
Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 4.4
It may work with some machining(03.05.2010)
Easy to install - needs some work on it to look right, rod to long, sticks out 1/8 inch in front of barrel bushing.
NOT TOO LONG FOR 4.25" COMMANDER(27.09.2012)
THIS IS VERY WELL MADE PART. DROPS RIGHT IN ON TRUE COMMANDERS. JUST MAKE SURE IT'S A 4.25" BARRELED COMMANDER. IF YOUR COMMANDER HAS A 4" BARREL IT WILL OBVIOUSLY BE A LITTLE LONG. I'VE PUT THEM IN COLTS & DAN WESSONS FOR CUSTOMERS & THEY WHERE VERY PLEASED!
Great product(01.09.2016)
This is a high quality product. It's sized perfectly for my Colt pistol.
Controls heavy recoil from +P loads(06.01.2012)
I wasn't really looking to upgrade my mil-spec guide rod until I test fired a friends 1911 with this product installed and I was amazed at the difference. Needless to say it is installed in my weapon and it truly tames those +P rounds. I wouldn't recommend firing super hot ammo all the time, but I like to practice with what I intend to use for self defense. I loved this product!
Good Rock Island1911 after alteration(25.02.2012)
I had to grind a little bit of material off of the round section of the back of the guid rod base. It was not letting the base site flush. I have a 2011 Rock Island full size 1911 A1FS GI.
Good after minor alteration(25.02.2012)
It requred some grinding of the round backing in order for it not to get stuck in a position that caued binding. I put it on a 2011 Rock Island 1922 A!FS.
EASY UPGRADE(27.09.2012)
I'VE INSTALLED ALOT OF THESE IN CUSTOMERS GUNS. COLT, SPRINGFIELD, KIMBER, DAN WESSON, TAURUS, ETC.. ALL THE BENEFITS OF A 1-PIECE GUIDE ROD BUT MAKES IT MUCH EASIER TO DISASSEMBLE. I'VE NEVER HAD TO GRIND ON 1 OR MODIFIY IN ANY WAY. BEAUTIFUL FINISH, LOOKS LIKE ONE SOLID PIECE UNTIL YOU UNSREW IT.
Over All Good Drop In Upgrade(09.06.2014)
I installed this on my Ruger SR1911 and it was a perfect fit. The OAL was spot on. Very easy to install (if you can field strip your weapon you can install this part)and the included allen wrench actually fits. A bit of a rarity as far as included tools go these days, and it's not a soft steel wrench that rounds off easily. Not that you need a lot of torque on this. The spring cup to guide rod fit is surprisingly tight. Another advantage that is not in the description is a little added muzzle weight. Not enough to be a bother while sighting but helps to reduce muzzle rise just slightly. I also suspect the spring cup to be slightly thicker between the spring and barrel bushing. The new parts went in a little stiffer than the factory parts did. My pistol only had about a box of ammo through it before the upgrade. The only thing I think I'll be doing to improve this part is a bit of polishing. I can feel the spring rub against the guide rod, but if I were more patient I'm sure the parts would smooth themselves out with a few trips to the range. In conclusion I would recommend this as a simple upgrade to any level of 1911 shooter. I'll be ordering more for my other govt' models.
N. prodotto: 087045889 ED BROWN TWO PIECE GUIDE ROD FITS GOVT. 5" Parti Fabbricante: 889800732889009 Design a due pezzi a lunghezza completa che supporta completamente la molla di rinculo per aiutare la pistola a camerare, estrarre e cicli in modo più fluido. Aiuta a prevenire il bloccaggio della molla, rendendo la smontaggio della slide veloce e semplice. Testa resistente agli urti e al'usura e albero in acciaio inossidabile temprato resistono sia all'uso in competizione che a quello operativo.
54.9CHF9CHF 54.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: 1911Modello: Government
Design a due pezzi a lunghezza intera che supporta completamente la molla di rinculo.
Aiuta a prevenire l'incastro della molla, rendendo il smontaggio della slitta veloce e semplice.
Testa resistente all'usura e albero in acciaio inossidabile indurito per uso in competizione e operativo.
Caratteristiche
Adatto per:
1911
Modello:
Government
Peso della spedizione: 0.064kgAltezza di spedizione: 13mmLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
UPC
: 800732889009
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
N. prodotto: 087045890 ED BROWN TWO PIECE GUIDE ROD FITS COMMANDER 4 1/4" Parti Fabbricante: 889C800732889023 Design a due pezzi a lunghezza completa che supporta completamente la molla di rinculo per aiutare la pistola a camerare, estrarre e cicli in modo più fluido. Aiuta a prevenire il bloccaggio della molla, rendendo la smontaggio della slide veloce e semplice. Testa resistente agli urti e al'usura e albero in acciaio inossidabile temprato resistono sia all'uso in competizione che a quello operativo.
59.9CHF2CHF 59.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Design a due pezzi che supporta completamente la molla di rinculo per cicli più fluidi.
Previene l'incastro della molla, facilitando lo smontaggio della slitta.
Realizzato in acciaio inossidabile indurito, adatto per uso competitivo e operativo.
Caratteristiche
Adatto per:
1911
Modello:
Commander
Peso della spedizione: 0.054kgLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
UPC
: 800732889023
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Scopri il guidamolla due pezzi ED BROWN per 1911. 🛠️ Design robusto in acciaio inossidabile per prestazioni superiori e smontaggio facile.
Prevents Recoil Spring Bind; Makes Takedown Easier
Full-length, two piece design fully supports the recoil spring to help the pistol chamber, extract and cycle smoother. Helps prevent spring bind, makes slide takedown fast and simple. Long wearing, shock-resistant head and hardened stainless steel shaft stand up to both competition and duty use.
SPECS: Stainless steel. Includes guide rod plug and 5/32" Allen wrench.
Altro...
Previene il Bloccaggio della Molla di Rinculo; Rende il Smontaggio più Facile
Design a due pezzi a lunghezza completa che supporta completamente la molla di rinculo per aiutare la pistola a camerare, estrarre e cicli in modo più fluido. Aiuta a prevenire il bloccaggio della molla, rendendo la smontaggio della slide veloce e semplice. Testa resistente agli urti e al'usura e albero in acciaio inossidabile temprato resistono sia all'uso in competizione che a quello operativo.
SPECS: Acciaio inossidabile. Include il tappo del guidamolla e una chiave Allen da 5/32".
Altro...
Punteggi dei clienti per ED BROWN TWO PIECE GUIDE ROD FITS GOVT. 5"
Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 4.4
It may work with some machining(03.05.2010)
Easy to install - needs some work on it to look right, rod to long, sticks out 1/8 inch in front of barrel bushing.
NOT TOO LONG FOR 4.25" COMMANDER(27.09.2012)
THIS IS VERY WELL MADE PART. DROPS RIGHT IN ON TRUE COMMANDERS. JUST MAKE SURE IT'S A 4.25" BARRELED COMMANDER. IF YOUR COMMANDER HAS A 4" BARREL IT WILL OBVIOUSLY BE A LITTLE LONG. I'VE PUT THEM IN COLTS & DAN WESSONS FOR CUSTOMERS & THEY WHERE VERY PLEASED!
Great product(01.09.2016)
This is a high quality product. It's sized perfectly for my Colt pistol.
Controls heavy recoil from +P loads(06.01.2012)
I wasn't really looking to upgrade my mil-spec guide rod until I test fired a friends 1911 with this product installed and I was amazed at the difference. Needless to say it is installed in my weapon and it truly tames those +P rounds. I wouldn't recommend firing super hot ammo all the time, but I like to practice with what I intend to use for self defense. I loved this product!
Good Rock Island1911 after alteration(25.02.2012)
I had to grind a little bit of material off of the round section of the back of the guid rod base. It was not letting the base site flush. I have a 2011 Rock Island full size 1911 A1FS GI.
Good after minor alteration(25.02.2012)
It requred some grinding of the round backing in order for it not to get stuck in a position that caued binding. I put it on a 2011 Rock Island 1922 A!FS.
EASY UPGRADE(27.09.2012)
I'VE INSTALLED ALOT OF THESE IN CUSTOMERS GUNS. COLT, SPRINGFIELD, KIMBER, DAN WESSON, TAURUS, ETC.. ALL THE BENEFITS OF A 1-PIECE GUIDE ROD BUT MAKES IT MUCH EASIER TO DISASSEMBLE. I'VE NEVER HAD TO GRIND ON 1 OR MODIFIY IN ANY WAY. BEAUTIFUL FINISH, LOOKS LIKE ONE SOLID PIECE UNTIL YOU UNSREW IT.
Over All Good Drop In Upgrade(09.06.2014)
I installed this on my Ruger SR1911 and it was a perfect fit. The OAL was spot on. Very easy to install (if you can field strip your weapon you can install this part)and the included allen wrench actually fits. A bit of a rarity as far as included tools go these days, and it's not a soft steel wrench that rounds off easily. Not that you need a lot of torque on this. The spring cup to guide rod fit is surprisingly tight. Another advantage that is not in the description is a little added muzzle weight. Not enough to be a bother while sighting but helps to reduce muzzle rise just slightly. I also suspect the spring cup to be slightly thicker between the spring and barrel bushing. The new parts went in a little stiffer than the factory parts did. My pistol only had about a box of ammo through it before the upgrade. The only thing I think I'll be doing to improve this part is a bit of polishing. I can feel the spring rub against the guide rod, but if I were more patient I'm sure the parts would smooth themselves out with a few trips to the range. In conclusion I would recommend this as a simple upgrade to any level of 1911 shooter. I'll be ordering more for my other govt' models.