Il Carrello è vuoto.

Carrello

Aiuto e contatti

Spedizione gratuita con ordini superiori ad CHF 399

Politica di restituzione di 100 giorni

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

WILSON COMBAT
1911 BEAVERTAIL GRIP SAFETY

874218000660 965298001

Two Styles, Both With Competition Proven Design That Ends Hammer Bite

Wide grip safety spreads recoil out over a larger area of the hand for increased comfort. Standard Model beavertails feature a flared "tail" that quickly guides hand into position and totally eliminates hammer bite on the web between the thumb and finger. High Grip Model has an upswept "tail" that pushes the wrist into a straight position for faster sight pickup and recovery, and a raised pad for positive palm contact. Requires contouring frame and fitting to the trigger stirrup.

SPECS: Satin finished stainless, blued steel or aluminum alloy. .835" (21.2mm) from rear of hole to tip. Fits Series 70 & 80/90 with firing pin block.

Altro...

Due stili, entrambi con un design collaudato in competizione che elimina il morso del cane

La sicurezza del grip ampia distribuisce il rinculo su un'area più grande della mano per un comfort maggiore. I modelli standard di beavertail presentano una "coda" flessa che guida rapidamente la mano in posizione ed elimina completamente il morso del cane sulla parte tra il pollice e l'indice. Il modello High Grip ha una "coda" sollevata che spinge il polso in una posizione dritta per una più rapida acquisizione della mira e recupero, e un pad rialzato per un contatto positivo con il palmo. Richiede la sagomatura del telaio e l'adattamento al gancio del grilletto.

SPECIFICHE: Acciaio inossidabile finitura satinata, acciaio blu o lega di alluminio. .835" (21.2mm) dalla parte posteriore del foro alla punta. Si adatta ai modelli Series 70 & 80/90 con blocco del percussore.

Altro...

Punteggi dei clienti per WILSON COMBAT BLUE SAFETY

Numero di punteggi: 13
Da brownells.com: 13
Punteggio medio: 3.8

Perfect fit (23.10.2012)

Dropped in without any alterations on my Colt Delta Elite. Doesnt match the brushed stainless finish exactly but holster wear will take care of that.

A must have addition to any 1911. (23.02.2013)

Just finished installation on my para GI expert and couldnt be more pleased with appearence and feel. A radius jig is a must for installation. Take your time and be patient and you will be very pleased. BTW I polished the beaver tail to a mirror finish but that just my prefference. Now lets go puts some rounds through it.

If you like learning by doing ... (10.04.2010)

I am happy with the finished product, but I had to really work at it. The directions that come with this product are illegible and useless. I gave it only three stars based on that. If you are okay with learning a lot and have the time (took me about 8 hours, next time will be half of that or less) then this is a good weekend project. I put it on my Para G.I., because it was biting my hand. You will need to re-finish the frame afterwards if looks matter. Have a good set of metal files, wear gloves when doing the filing, and you might want to put several layers of tape all around the filing area in the event of the inevitable slips.

Wilson Combat, it doesn't get any better (14.08.2010)

Easy to install. Solid, high quality product.

Fitting required. (21.01.2011)

Ordered for my colt delta elite, installed with the recomended jig. Good idea. Quite a bit of fitting requirered. But once installed functioned flawlesly. Worth the effort.

I would buy again (28.04.2011)

Take your time and it will turn out great. Need to buy the jig.

Perfect fit Springfield Armory Mil Spec (10.02.2012)

This is my first attempt working on 1911s. I own a SA Mil Spec 1911-A1 and it is a sweet gun. I changed the B tail grip, hammer, and sear. It was fairly simple with some help from youtube vidieos. I did not have any problem with the original grip safety on the mil spec just like the looks and feel of the Btail better. I am very happy with Wilson Cambat quality and prices. Also I am very pleased with Brownells service and prices. This is my first but not my last purchase from Brownells.

Casting Issues (12.03.2012)

I bought this grip safety for a new build. I inspected it and found excessive flashing from the injection mould process. It was located along the groove for the hammer strut and on the trigger stop tang. Wanting to move along with my project, I filed the flashing off. I was not completely satisfied that I had to do this much finishing work, I ordered the Bullet Proof Grip safety from Wilson. Much higher quality. I had another issue with a Wilson thumb safety that was cast. The pin was oversize and out of round. Lessons learned. From now on I will be using machined parts rather than cast. I feel Wilson's should be leaning on the company they contract to do their injection moulding about the quality issues.

Excellent Product (20.07.2012)

I bought this to install in a Caspian Frame Build. Buy the fitting jig and the installation/fitting is a snap. Great upgrade from stock.

Major fitting may be needed (13.03.2015)

FFL/SOT at GMF we run a small business so value matters,but not at the cost of quality. Most of the 1911s customized are Colt s70. These beaver tail safety's are Absolutely NOT as good as the bullet proof steel parts,but if your on a budget and need a good cast part these are trustworthy. After modifying frame with fixture some require lots of fit and polish. Others drop right in.

<img width="500" src='/userdocs/reviewimages/f3896b4c-25aa-4522-b833-f2ce09c9ea55.jpg' alt=''>

Good product (26.03.2015)

Not exactly drop in, and the finish is far from blue it's closer to cheap parkerizing. It's a dull black finish and I would recommend a gunsmith to install but with patience and some utube vid watching you might get it done without needing to buy another one. Good luck.

wilson problems (23.04.2015)

The 298b grip safety I received was not even close to a

premium product. It had more than one dimensional

problems. Wilson did not offer any help except to contact

where I bought it and how good the more expensive grip

safety was.

When I contacted Brownells, They honored there return

policy just like they advertise.

Brownells still has the service that a lot of companies have

lost.

Thanks, George Butler

Easy Peasy! (02.03.2017)

I purchased this grip safety to replace the original grip safety on my Rock Island Armory 1911 G.I. model 45 ACP. I watched a pro perform this operation on YouTube and followed exactly what he did. This truly is a drop in safety, and was extremely easy to put in with no modifications, other than a commander style drop in hammer, to the pistol what so ever. It was that simple, and now I don't get the old hammer bite, complete with bloody skin, when I shoot the pistol. I am extremely pleased that I found this through Brownell's and I will now buy all my gun parts through this fine company.

Leggi più recensioni su brownells.com

69.9 69.9 2 CHF

N. prodotto: 965298001
WILSON COMBAT BLUE SAFETY
Parti Fabbricante: 298B 874218000660 La sicurezza del grip ampia distribuisce il rinculo su un'area più grande della mano per un comfort maggiore. I modelli standard di beavertail presentano una "coda" flessa che guida rapidamente la mano in posizione ed elimina completamente il morso del cane sulla parte tra il pollice e l'indice. Il modello High Grip ha una "coda" sollevata che spinge il polso in una posizione dritta per una più rapida acquisizione della mira e recupero, e un pad rialzato per un contatto positivo con il palmo. Richiede la sagomatura del telaio e l'adattamento al gancio del grilletto.

69.9 CHF 7 CHF 69.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: 1911 Finitura: Blued Mano: Destro Modello: Government, Commander, Officers Tipo: Grip

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

La sicurezza del grilletto ampia offre maggiore comfort distribuendo il rinculo su una superficie più ampia della mano.
Il modello High Grip spinge il polso in posizione dritta per una rapida acquisizione e recupero della mira.
Richiede modellatura del telaio e adattamento al gancio del grilletto per una corretta installazione.

Caratteristiche

Adatto per: 1911 Finitura: Blued Mano: Destro Modello: Commander,Government,Officers Tipo: Grip Peso della spedizione: 0.054kg Altezza di spedizione: 32mm Larghezza di spedizione: 83mm Lunghezza di spedizione: 178mm UPC : 874218000660

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x

N. prodotto: 965298002
WILSON COMBAT STAINLESS SAFETY
Parti Fabbricante: 298S 874218000677 La sicurezza del grip ampia distribuisce il rinculo su un'area più grande della mano per un comfort maggiore. I modelli standard di beavertail presentano una "coda" flessa che guida rapidamente la mano in posizione ed elimina completamente il morso del cane sulla parte tra il pollice e l'indice. Il modello High Grip ha una "coda" sollevata che spinge il polso in una posizione dritta per una più rapida acquisizione della mira e recupero, e un pad rialzato per un contatto positivo con il palmo. Richiede la sagomatura del telaio e l'adattamento al gancio del grilletto.

69.9 CHF 0 CHF 69.90 *

In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: 1911 Finitura: Acciaio inox Mano: Destro Modello: Government, Commander, Officers Tipo: Grip

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Scopri la sicurezza grip 1911 Beavertail di Wilson Combat. Comfort e controllo superiori per il tuo modello 1911! ✨

Two Styles, Both With Competition Proven Design That Ends Hammer Bite

SPECS: Satin finished stainless, blued steel or aluminum alloy. .835" (21.2mm) from rear of hole to tip. Fits Series 70 & 80/90 with firing pin block.

Altro...

Due stili, entrambi con un design collaudato in competizione che elimina il morso del cane

Altro...

Punteggi dei clienti per WILSON COMBAT BLUE SAFETY

Numero di punteggi: 13
Da brownells.com: 13
Punteggio medio: 3.8

Perfect fit (23.10.2012)

Dropped in without any alterations on my Colt Delta Elite. Doesnt match the brushed stainless finish exactly but holster wear will take care of that.

A must have addition to any 1911. (23.02.2013)

If you like learning by doing ... (10.04.2010)

Wilson Combat, it doesn't get any better (14.08.2010)

Easy to install. Solid, high quality product.

Fitting required. (21.01.2011)

Ordered for my colt delta elite, installed with the recomended jig. Good idea. Quite a bit of fitting requirered. But once installed functioned flawlesly. Worth the effort.

I would buy again (28.04.2011)

Take your time and it will turn out great. Need to buy the jig.

Perfect fit Springfield Armory Mil Spec (10.02.2012)