Radius Frame Ears "Just Right" For Brown Beavertail Safeties
Neat little jig "buttons" show you just how much of the frame ears to mill/grind away when installing Ed's Beavertail Safety. Just drop in the thumb safety pivot pin hole, scribe around, grind/mill close, then hand file right down to the hardened button. Includes instructions.
SPECS: Hardened steel. ½" (12.7mm) dia. x 1¾" (4.4cm) long.
Altro...
Orecchie del Telaio a Raggio "Proprio Giuste" per Sicurezze Beavertail Marroni
Un piccolo jig "button" mostra esattamente quanto delle orecchie del telaio devono essere fresate/smerigliate quando si installa la Sicurezza Beavertail di Ed. Basta inserire il perno di pivot della sicura, tracciare attorno, fresare/smerigliare vicino, poi limare a mano fino al pulsante temprato. Include istruzioni.
SPECS: Acciaio temprato. ½" (12.7mm) di diametro x 1¾" (4.4cm) di lunghezza.
Altro...
Punteggi dei clienti per ED BROWN BROWN BEAVERTAIL JIG
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4.8
Super simple and easy to use(08.11.2009)
I don't know how this could be much better. It's cheap and with just a bit of file work you have a perfectly square fit.
Works Great!(25.07.2011)
Makes installing that beavertail easy as pie!
The only way to go for anyone looking to install an Ed Brown Bevertail.
Beavertail jig(24.08.2012)
Bought this from Ed Brown and used it to install a beavertail on a Colt. Since it was my first install I was more than a little apprehensive since it is possible to damage the frame. But I took it very slow and easy. It seems like it took forever but the Safety fits perfectly. Very simple and ends are hard enough that fies won't cut them so its well worth the investment. Gettin ready to tighten the slide-wish me luck!
Just the ticket for a successful install(01.12.2012)
A sharp flat file with slow even strokes provides for a very professional looking install. Absolutely the best way to install the Ed Brown grip safety. Some fine sandpaper and polishing gave way to a very professional looking install. The absolute best tool for the job.
MUST HAVE ITEM(14.02.2013)
This jig was just what the dr. ordered. My first time doing anything like this and the end result was outstanding. Looks like the gun came with this beavertail safety. Thanks Brownells for carrying this jig at an affordable price
N. prodotto: 087145886 ED BROWN BROWN BEAVERTAIL JIG Parti Fabbricante: 886800732886008 Un piccolo jig "button" mostra esattamente quanto delle orecchie del telaio devono essere fresate/smerigliate quando si installa la Sicurezza Beavertail di Ed. Basta inserire il perno di pivot della sicura, tracciare attorno, fresare/smerigliare vicino, poi limare a mano fino al pulsante temprato. Include istruzioni.
54.9CHF0CHF 54.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Radius Frame Ears "Just Right" For Brown Beavertail Safeties
Neat little jig "buttons" show you just how much of the frame ears to mill/grind away when installing Ed's Beavertail Safety. Just drop in the thumb safety pivot pin hole, scribe around, grind/mill close, then hand file right down to the hardened button. Includes instructions.
SPECS: Hardened steel. ½" (12.7mm) dia. x 1¾" (4.4cm) long.
Altro...
Orecchie del Telaio a Raggio "Proprio Giuste" per Sicurezze Beavertail Marroni
Un piccolo jig "button" mostra esattamente quanto delle orecchie del telaio devono essere fresate/smerigliate quando si installa la Sicurezza Beavertail di Ed. Basta inserire il perno di pivot della sicura, tracciare attorno, fresare/smerigliare vicino, poi limare a mano fino al pulsante temprato. Include istruzioni.
SPECS: Acciaio temprato. ½" (12.7mm) di diametro x 1¾" (4.4cm) di lunghezza.
Altro...
Punteggi dei clienti per ED BROWN BROWN BEAVERTAIL JIG
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4.8
Super simple and easy to use(08.11.2009)
I don't know how this could be much better. It's cheap and with just a bit of file work you have a perfectly square fit.
Works Great!(25.07.2011)
Makes installing that beavertail easy as pie!
The only way to go for anyone looking to install an Ed Brown Bevertail.
Beavertail jig(24.08.2012)
Bought this from Ed Brown and used it to install a beavertail on a Colt. Since it was my first install I was more than a little apprehensive since it is possible to damage the frame. But I took it very slow and easy. It seems like it took forever but the Safety fits perfectly. Very simple and ends are hard enough that fies won't cut them so its well worth the investment. Gettin ready to tighten the slide-wish me luck!
Just the ticket for a successful install(01.12.2012)
A sharp flat file with slow even strokes provides for a very professional looking install. Absolutely the best way to install the Ed Brown grip safety. Some fine sandpaper and polishing gave way to a very professional looking install. The absolute best tool for the job.
MUST HAVE ITEM(14.02.2013)
This jig was just what the dr. ordered. My first time doing anything like this and the end result was outstanding. Looks like the gun came with this beavertail safety. Thanks Brownells for carrying this jig at an affordable price