Complete set of eleven, centerless ground pins helps you refurbish or build a new 1911 from scratch. Each is heat-treated for added wear-resistance and long service life.
SPECS: Hardened steel, blued. Fits single stack 1911 auto. Set includes: hammer strut pin, link pin, mainspring plunger, sear pin, ejector pin, mainspring housing pin, mainspring plunger, mainspring plunger retainer, hammer pin, slide stop plunger, and thumb safety plunger.
Plus...
Remplace chaque axe du pistolet 1911
Ensemble complet de onze axes rectifiés sans centre qui t'aide à rénover ou à construire un nouveau 1911 à partir de zéro. Chacun est traité thermiquement pour une résistance accrue à l'usure et une longue durée de vie.
SPECIFICATIONS : Acier trempé, bleu. S'adapte aux pistolets 1911 à chargeur simple. Le kit comprend : axe de bras de détente, axe de liaison, plongeur de ressort principal, axe de détente, axe d'éjecteur, axe de boîtier de ressort principal, plongeur de ressort principal, retient le plongeur de ressort principal, axe de marteau, plongeur d'arrêt de glissière, et plongeur de sécurité à pouce.
Plus...
Évaluations client de CYLINDER & SLIDE 1911 PIN SET
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 3.5
Solid Gear(22.12.2011)
These pins have fit in every frame I've built from American Tactical, to Para Ord. The only real modification needed is the plunger tube pin. its oversized (good thing!) so make sure you fit it properly. Over all Superb quality for the price.
Looks nice...(02.10.2014)
I had planned to replace the pins in my RIA 1911, figuring any pin set bought from Brownells had to be better than those from the factory. The originals looked a bit rough and had lost most of their blueing. The C&S parts looked fantastic with a nice satin blued finish. Then I measured them with my digital micrometer. The ordinance specifications for the sear & hammer pins are 0.110"+0/-0.002" & 0.157"+0/-0.002", respectively. RIA sear pin measured 0.1074-0.1078", and the hammer pin 0.1559". So the sear pin was slightly undersized, but the circularity & cylindricity for both were surprisingly good. The C&S pins measured in spec at 0.1080-0.1096" and 0.1559-0.1571. However, the sear pin was hour-glass shaped and the hammer pin was tapered. Both circularity & cylindricity were much poorer than the factory parts. The recoil plug that I bought from them had similar issues. Philippines 1, USA 0. Hopefully the other brands sold by Brownells can make better parts. After all, this is 2014, not 1914. Manufacturing has come a long way. Making centerless ground pins with a size tolerance of 0.002mm or 0.00008" is quite common these days. I'm crossing C&S off my list.
Référence: 206000036 CYLINDER & SLIDE 1911 PIN SET Ref Fabricant: CS0014000000000147 Ensemble complet de onze axes rectifiés sans centre qui t'aide à rénover ou à construire un nouveau 1911 à partir de zéro. Chacun est traité thermiquement pour une résistance accrue à l'usure et une longue durée de vie.
34.9CHF1CHF 34.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Complete set of eleven, centerless ground pins helps you refurbish or build a new 1911 from scratch. Each is heat-treated for added wear-resistance and long service life.
SPECS: Hardened steel, blued. Fits single stack 1911 auto. Set includes: hammer strut pin, link pin, mainspring plunger, sear pin, ejector pin, mainspring housing pin, mainspring plunger, mainspring plunger retainer, hammer pin, slide stop plunger, and thumb safety plunger.
Plus...
Remplace chaque axe du pistolet 1911
Ensemble complet de onze axes rectifiés sans centre qui t'aide à rénover ou à construire un nouveau 1911 à partir de zéro. Chacun est traité thermiquement pour une résistance accrue à l'usure et une longue durée de vie.
SPECIFICATIONS : Acier trempé, bleu. S'adapte aux pistolets 1911 à chargeur simple. Le kit comprend : axe de bras de détente, axe de liaison, plongeur de ressort principal, axe de détente, axe d'éjecteur, axe de boîtier de ressort principal, plongeur de ressort principal, retient le plongeur de ressort principal, axe de marteau, plongeur d'arrêt de glissière, et plongeur de sécurité à pouce.
Plus...
Évaluations client de CYLINDER & SLIDE 1911 PIN SET
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 3.5
Solid Gear(22.12.2011)
These pins have fit in every frame I've built from American Tactical, to Para Ord. The only real modification needed is the plunger tube pin. its oversized (good thing!) so make sure you fit it properly. Over all Superb quality for the price.
Looks nice...(02.10.2014)
I had planned to replace the pins in my RIA 1911, figuring any pin set bought from Brownells had to be better than those from the factory. The originals looked a bit rough and had lost most of their blueing. The C&S parts looked fantastic with a nice satin blued finish. Then I measured them with my digital micrometer. The ordinance specifications for the sear & hammer pins are 0.110"+0/-0.002" & 0.157"+0/-0.002", respectively. RIA sear pin measured 0.1074-0.1078", and the hammer pin 0.1559". So the sear pin was slightly undersized, but the circularity & cylindricity for both were surprisingly good. The C&S pins measured in spec at 0.1080-0.1096" and 0.1559-0.1571. However, the sear pin was hour-glass shaped and the hammer pin was tapered. Both circularity & cylindricity were much poorer than the factory parts. The recoil plug that I bought from them had similar issues. Philippines 1, USA 0. Hopefully the other brands sold by Brownells can make better parts. After all, this is 2014, not 1914. Manufacturing has come a long way. Making centerless ground pins with a size tolerance of 0.002mm or 0.00008" is quite common these days. I'm crossing C&S off my list.