Rugged, Reliable, Hardened Steel For Extreme Tactical Duty
Heavy duty tactical magazine catch ensures secure mag retention and fast, reliable release under extreme service and competition conditions. Serrated button is 1⁄16" taller than factory button to provide positive, non-slip finger contact to help you drop the magazine on the first attempt. The interior of the catch is relieved to prevent you from over-extending the catch and trapping the spent magazine. Available in stainless or carbon steel. Does not include catch lock and spring.
SPECS: Carbon steel, blued, or stainless steel (SS),natural finish.
Plus...
Acier robuste, fiable et durci pour un devoir tactique extrême
Le magazine catch tactique robuste garantit une rétention sécurisée du chargeur et un relâchement rapide et fiable dans des conditions de service extrêmes et de compétition. Le bouton strié est 1⁄16" plus haut que le bouton d'origine pour offrir un contact positif et antidérapant avec le doigt afin de vous aider à libérer le chargeur dès la première tentative. L'intérieur du catch est dégagé pour éviter que vous ne dépassiez le catch et ne bloquiez le chargeur usagé. Disponible en acier inoxydable ou en acier au carbone. N'inclut pas le verrou de catch et le ressort.
SPÉCIFICATIONS : Acier au carbone, bleui, ou acier inoxydable (SS),finition naturelle.
Plus...
Évaluations client de HARRISON DESIGN & CONSULTING MAGAZINE RELEASE, SS
Nombre d'évaluations: 9
De brownells.com: 9
Note moyenne: 4.3
GREAT FIT AND FUNCTION!!!(27.02.2011)
I tried two different Ed Brown extended tactical releases and neither one fit for functioned well. They also did not have a stop machined into it to keep the release from being pushed too far and jamming the mag.I was disappointed in the Ed Brown Product!!! BUT, I was impressed with the fit of this one! I put it in...the only thing I did was clean up the casting/machining marks. It was smooth and didn't over-extend as stated. Great Part!
SS mag catch(17.06.2011)
Drop in fit to my Springfield TRP. Works 100%, with factory and WC 47d mags. Another great product form harrison!
Will buy again.(26.12.2011)
Part went into gun with minor fitting which I would rather have than falling in. Minimal clearance. Looks good in gun.
Didn't have a good experience(24.02.2012)
I bought this extended mag release button based on the 5 star reviews it got. I tried to install it in a Colt Series 80 government model and though it fit the frame fine I could not get the holding screw to turn enough to release when installing. When compared to the original Colt release, which works perfectly, it appears there's no clearance notch to allow the tab to pivot in the frame.
Perfect Fit(06.07.2016)
Like the title says, fit perfectly, works properly and took all of two minutes to install in my old Kimber Custom.
Dropped in, works perfectly(27.11.2017)
I used the Harrison stainless magazine catch to replace the blued MIM catch that came with my Ruger SR1911 CMD. Part dropped right in, works perfectly and looks great on my stainless 1911. Note you will need to order the catch lock and spring also unless you will be reusing your existing parts. Very pleased with this product.
True drop in(18.07.2018)
Used this to replace a competition style mag catch release on my Colt Officer's ACP. The process takes about a minute, maybe two. Zero fitting required, it was a complete drop in fit. The finish of the stainless was an adequate match to my stainless Officer's ACP. I wish all work was this easy. Testing afterward: it works, that's all I can ask for!
The best 1911 mag catch(24.12.2011)
This is the best mag catch you can get for a 1911. It fit my Kimber perfect with no fitting. It has a built in stop so you cannot push the button in too far as to hit the magazine such as with the Brown ext mag catch.
"Drop in" is always hit or miss(20.07.2013)
Three stars due to "tolerance stacking."
I installed this in an STI Spartan 9mm. The mag catch would not seat fully into the frame.
After trying it in several other 1911s and finding it fit fine in them, I used a 5/16 end mill, spinning it by hand in reverse, to clean up any burrs that may have been in the Armscor frame.
Then I found it trapped the magazine while reloading, on all of the 1911s I installed it in. The Armscor mag catch lock may be too short, I didn't compare it to others. I relieved the inside of the mag catch with a sanding drum on my dremel.
Overall, I'm not unhappy with it and it appears to be a high quality part. But I always assume 1911 parts will need some fitting.
Référence: 100004997 HARRISON DESIGN & CONSULTING MAGAZINE RELEASE, SS Ref Fabricant: HD-202-S Le magazine catch tactique robuste garantit une rétention sécurisée du chargeur et un relâchement rapide et fiable dans des conditions de service extrêmes et de compétition. Le bouton strié est 1⁄16" plus haut que le bouton d'origine pour offrir un contact positif et antidérapant avec le doigt afin de vous aider à libérer le chargeur dès la première tentative. L'intérieur du catch est dégagé pour éviter que vous ne dépassiez le catch et ne bloquiez le chargeur usagé. Disponible en acier inoxydable ou en acier au carbone. N'inclut pas le verrou de catch et le ressort.
49.9CHF1CHF 49.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Le magazine catch est conçu pour une rétention sécurisée et un relâchement rapide du chargeur.
Le bouton cranté est plus haut pour un meilleur contact et une prise antidérapante.
Disponible en acier inoxydable ou en acier au carbone, sans verrou de catch ni ressort inclus.
Caractéristiques
Finition:
Acier Inox
Main:
Droit
Manufacture:
1911
Modèle:
Government,Commander,Officers
Poids du colis: 0.009kgHauteur d'expédition: 5mmLargeur d'expédition: 79mmLongueur d'expédition: 145mm
Détails de l'article
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Référence: 100004998 HARRISON DESIGN & CONSULTING MAGAZINE RELEASE, BLUED Ref Fabricant: HD-202-B Le magazine catch tactique robuste garantit une rétention sécurisée du chargeur et un relâchement rapide et fiable dans des conditions de service extrêmes et de compétition. Le bouton strié est 1⁄16" plus haut que le bouton d'origine pour offrir un contact positif et antidérapant avec le doigt afin de vous aider à libérer le chargeur dès la première tentative. L'intérieur du catch est dégagé pour éviter que vous ne dépassiez le catch et ne bloquiez le chargeur usagé. Disponible en acier inoxydable ou en acier au carbone. N'inclut pas le verrou de catch et le ressort.
54.9CHF0CHF 54.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Rugged, Reliable, Hardened Steel For Extreme Tactical Duty
Heavy duty tactical magazine catch ensures secure mag retention and fast, reliable release under extreme service and competition conditions. Serrated button is 1⁄16" taller than factory button to provide positive, non-slip finger contact to help you drop the magazine on the first attempt. The interior of the catch is relieved to prevent you from over-extending the catch and trapping the spent magazine. Available in stainless or carbon steel. Does not include catch lock and spring.
SPECS: Carbon steel, blued, or stainless steel (SS),natural finish.
Plus...
Acier robuste, fiable et durci pour un devoir tactique extrême
Le magazine catch tactique robuste garantit une rétention sécurisée du chargeur et un relâchement rapide et fiable dans des conditions de service extrêmes et de compétition. Le bouton strié est 1⁄16" plus haut que le bouton d'origine pour offrir un contact positif et antidérapant avec le doigt afin de vous aider à libérer le chargeur dès la première tentative. L'intérieur du catch est dégagé pour éviter que vous ne dépassiez le catch et ne bloquiez le chargeur usagé. Disponible en acier inoxydable ou en acier au carbone. N'inclut pas le verrou de catch et le ressort.
SPÉCIFICATIONS : Acier au carbone, bleui, ou acier inoxydable (SS),finition naturelle.
Plus...
Évaluations client de HARRISON DESIGN & CONSULTING MAGAZINE RELEASE, SS
Nombre d'évaluations: 9
De brownells.com: 9
Note moyenne: 4.3
GREAT FIT AND FUNCTION!!!(27.02.2011)
I tried two different Ed Brown extended tactical releases and neither one fit for functioned well. They also did not have a stop machined into it to keep the release from being pushed too far and jamming the mag.I was disappointed in the Ed Brown Product!!! BUT, I was impressed with the fit of this one! I put it in...the only thing I did was clean up the casting/machining marks. It was smooth and didn't over-extend as stated. Great Part!
SS mag catch(17.06.2011)
Drop in fit to my Springfield TRP. Works 100%, with factory and WC 47d mags. Another great product form harrison!
Will buy again.(26.12.2011)
Part went into gun with minor fitting which I would rather have than falling in. Minimal clearance. Looks good in gun.
Didn't have a good experience(24.02.2012)
I bought this extended mag release button based on the 5 star reviews it got. I tried to install it in a Colt Series 80 government model and though it fit the frame fine I could not get the holding screw to turn enough to release when installing. When compared to the original Colt release, which works perfectly, it appears there's no clearance notch to allow the tab to pivot in the frame.
Perfect Fit(06.07.2016)
Like the title says, fit perfectly, works properly and took all of two minutes to install in my old Kimber Custom.
Dropped in, works perfectly(27.11.2017)
I used the Harrison stainless magazine catch to replace the blued MIM catch that came with my Ruger SR1911 CMD. Part dropped right in, works perfectly and looks great on my stainless 1911. Note you will need to order the catch lock and spring also unless you will be reusing your existing parts. Very pleased with this product.
True drop in(18.07.2018)
Used this to replace a competition style mag catch release on my Colt Officer's ACP. The process takes about a minute, maybe two. Zero fitting required, it was a complete drop in fit. The finish of the stainless was an adequate match to my stainless Officer's ACP. I wish all work was this easy. Testing afterward: it works, that's all I can ask for!
The best 1911 mag catch(24.12.2011)
This is the best mag catch you can get for a 1911. It fit my Kimber perfect with no fitting. It has a built in stop so you cannot push the button in too far as to hit the magazine such as with the Brown ext mag catch.
"Drop in" is always hit or miss(20.07.2013)
Three stars due to "tolerance stacking."
I installed this in an STI Spartan 9mm. The mag catch would not seat fully into the frame.
After trying it in several other 1911s and finding it fit fine in them, I used a 5/16 end mill, spinning it by hand in reverse, to clean up any burrs that may have been in the Armscor frame.
Then I found it trapped the magazine while reloading, on all of the 1911s I installed it in. The Armscor mag catch lock may be too short, I didn't compare it to others. I relieved the inside of the mag catch with a sanding drum on my dremel.
Overall, I'm not unhappy with it and it appears to be a high quality part. But I always assume 1911 parts will need some fitting.