Designed For Custom Fitting To Provide A Smooth, No-Slop Pull
The same high-quality match-grade triggers Nighthawk fits to all its custom pistols. Choose from solid or skeletonized shoe. All models have crisp serrations on the face for positive, no-slip finger contact, but no sharp edges to abrade the finger pad. Overtravel adjustment screw and hex wrench also included. Solid trigger shoe comes in Short and Medium lengths. Custom model has skeletonized shoe and an extra-wide trigger bow for extra strength.
Progettato per un adattamento personalizzato per fornire un'azione fluida e senza gioco
Gli stessi grilletto di alta qualità di grado di gara che Nighthawk monta su tutte le sue pistole personalizzate. Scegli tra scarpetta solida o scheletrata. Tutti i modelli presentano scanalature nitide sulla faccia per un contatto positivo e senza scivolamenti delle dita, ma senza bordi affilati che possano abrasire il cuscinetto delle dita. Vite di regolazione dell'eccesso di corsa e chiave esagonale inclusi. La scarpetta del grilletto solido è disponibile in lunghezze Corte e Medie. Il modello personalizzato ha una scarpetta scheletrata e un arco del grilletto extra largo per una maggiore resistenza.
SPECIFICHE: Arco in acciaio inossidabile, scarpetta in alluminio, finitura naturale.
Altro...
Punteggi dei clienti per NIGHTHAWK CUSTOM Solid Trigger, Long
Numero di punteggi: 11
Da brownells.com: 11
Punteggio medio: 4.8
Stock look, Premium Quality.(17.02.2011)
This has been installed on a Springfield Armory 1911 A1 pattern frame. The bow is a perfect fit in my frame with no wobble or slop. The shoe needed a little stoning but that is to be expected, the shoe is the perfect width as there is no wobble or slop there either. The shoe is crimped to the bow rather than pinned and it is a solid unit. I think finding a better trigger than this for the money would be a difficult task.
Great upgrade(22.01.2014)
Used this as part of an upgrade to my Springfield 1911 Mil Spec. Had to slightly file the shoe to make it fit but that's a plus since I could perfectly fit it to my frame and eliminate all slop. The bow fit perfectly in the frame and pulls as smooth as silk. With the set screw in the trigger I was able to eliminate overtravel as well. Fantastic trigger.
Worth the money!(09.11.2009)
Excellent trigger for the money! Works perfect, looks great! Easy to seat your trigger finger into.
Good product(14.03.2010)
Excellent fit in my Combat Comander. Dropped in, not loose and no binding.
Very Nice for the Money(25.10.2010)
I used this trigger in a SS Essex frame Government Model that I built up from scratch. After the frame's trigger channels were coated with Brownell's Gunkote and lapped, trigger feels as if it is on ball bearings. Bow sides are smooth and burr free inside and out; and have no noticeable contact with magazine (trigger pull is same weight and feel with or without mag). Bow length is a little bit long in my frame (could very well be the iffy frame). Works very well once everything (grip safety, sear, thumb safety, hammer, disconnector) was fit together.
Excellent on a SIG GSR compact(20.04.2011)
My gun smith put this in my sig 1911 compact carry and he seemed surprised that no fitting was required. I noticed that it fit snugger than the original with no vertical or horizontal movement
WOW! AWESOME!!!(14.07.2011)
The fitting was perfect on my Colt Commander after squeezing the bow a tiny bit. Now the trigger is extremely smooth, precise, clean, crisp, light, and the annoying rattle and the wobble is gone. This [$]part pimped my Colt Commander to look like a $2500 gun. Buy it, it is worth every penny and you won't regret it.
Great trigger(18.01.2013)
Installed this in my Springfield Mil-Spec. Had to do minor fitting to get it not to stick. Hardly any play vertically or horizontally.
Easy to fit, looks great(27.04.2010)
I put this trigger in my stainless Springfield Mil Spec as part of a "WWI Look" project. It required a small amount of fitting, maybe 20 light file strokes apiece on the top and bottom of the shoe. I think it's a better fit than the factory trigger.
Sweet trigger!!(25.05.2011)
i'm not a gunsmith and this was my first 1911 project that I did the fitting of parts. took me about an hour to figure out what was wrong and how to fix it. its not a drop in for sure on my springfield champion with ed brown beaver tail and safety. trigger bow was too long and had to be filed and polished. grip safety wouldn't work and was blocking the trigger so it would get stuck. had to shorten and polish it also. it looks great and took a lot of play out of the trigger. didn't really effect the trigger job i already had done. can't get over how good it looks. serations on face are done perfect, not too sharp. bow came mirror polished
Quality Item(12.06.2011)
I put this trigger on my SA Mil Spec. The bow was just the right length and I ended up with very little vertical play. Very happy.
N. prodotto: 100003271 NIGHTHAWK CUSTOM Solid Trigger, Long Parti Fabbricante: SP0461080683000634 Gli stessi grilletto di alta qualità di grado di gara che Nighthawk monta su tutte le sue pistole personalizzate. Scegli tra scarpetta solida o scheletrata. Tutti i modelli presentano scanalature nitide sulla faccia per un contatto positivo e senza scivolamenti delle dita, ma senza bordi affilati che possano abrasire il cuscinetto delle dita. Vite di regolazione dell'eccesso di corsa e chiave esagonale inclusi. La scarpetta del grilletto solido è disponibile in lunghezze Corte e Medie. Il modello personalizzato ha una scarpetta scheletrata e un arco del grilletto extra largo per una maggiore resistenza.
34.38CHF1CHF 34.38
*CHF 42.96
Tempi di consegna circa 2-4 giorni dal magazzino locale.
Grilletto di alta qualità a livello di competizione, disponibile in versione solida o scheletrata.
Design ergonomico con scanalature per un contatto positivo e antiscivolo, senza bordi affilati.
Include vite di regolazione del sovra-travel e chiave esagonale; disponibile in lunghezze Corto e Medio.
Caratteristiche
Adatto per:
1911
Finitura:
Semilavorata
Modello:
Commander,Government,Officers
Tipo:
Competizione,Curved,Long,Solid
Peso della spedizione: 0.014kgAltezza di spedizione: 1mmLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
UPC
: 080683000634
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.c
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
N. prodotto: 100003270 NIGHTHAWK CUSTOM CUSTOM TRIGGER Parti Fabbricante: SP0463080683000641 Gli stessi grilletto di alta qualità di grado di gara che Nighthawk monta su tutte le sue pistole personalizzate. Scegli tra scarpetta solida o scheletrata. Tutti i modelli presentano scanalature nitide sulla faccia per un contatto positivo e senza scivolamenti delle dita, ma senza bordi affilati che possano abrasire il cuscinetto delle dita. Vite di regolazione dell'eccesso di corsa e chiave esagonale inclusi. La scarpetta del grilletto solido è disponibile in lunghezze Corte e Medie. Il modello personalizzato ha una scarpetta scheletrata e un arco del grilletto extra largo per una maggiore resistenza.
47.9CHF2CHF 47.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 100003273 NIGHTHAWK CUSTOM SOLID TRIGGER, SHORT Parti Fabbricante: SP0464080683000658 Gli stessi grilletto di alta qualità di grado di gara che Nighthawk monta su tutte le sue pistole personalizzate. Scegli tra scarpetta solida o scheletrata. Tutti i modelli presentano scanalature nitide sulla faccia per un contatto positivo e senza scivolamenti delle dita, ma senza bordi affilati che possano abrasire il cuscinetto delle dita. Vite di regolazione dell'eccesso di corsa e chiave esagonale inclusi. La scarpetta del grilletto solido è disponibile in lunghezze Corte e Medie. Il modello personalizzato ha una scarpetta scheletrata e un arco del grilletto extra largo per una maggiore resistenza.
48.9CHF3CHF 48.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: 1911Finitura: SemilavorataModello: Government, Commander, OfficersTipo: Curved, Solid, Short
N. prodotto: 100003272 NIGHTHAWK CUSTOM SOLID TRIGGER, MEDIUM Parti Fabbricante: SP0462080683001662 Gli stessi grilletto di alta qualità di grado di gara che Nighthawk monta su tutte le sue pistole personalizzate. Scegli tra scarpetta solida o scheletrata. Tutti i modelli presentano scanalature nitide sulla faccia per un contatto positivo e senza scivolamenti delle dita, ma senza bordi affilati che possano abrasire il cuscinetto delle dita. Vite di regolazione dell'eccesso di corsa e chiave esagonale inclusi. La scarpetta del grilletto solido è disponibile in lunghezze Corte e Medie. Il modello personalizzato ha una scarpetta scheletrata e un arco del grilletto extra largo per una maggiore resistenza.
49.9CHF0CHF 49.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Designed For Custom Fitting To Provide A Smooth, No-Slop Pull
The same high-quality match-grade triggers Nighthawk fits to all its custom pistols. Choose from solid or skeletonized shoe. All models have crisp serrations on the face for positive, no-slip finger contact, but no sharp edges to abrade the finger pad. Overtravel adjustment screw and hex wrench also included. Solid trigger shoe comes in Short and Medium lengths. Custom model has skeletonized shoe and an extra-wide trigger bow for extra strength.
Progettato per un adattamento personalizzato per fornire un'azione fluida e senza gioco
Gli stessi grilletto di alta qualità di grado di gara che Nighthawk monta su tutte le sue pistole personalizzate. Scegli tra scarpetta solida o scheletrata. Tutti i modelli presentano scanalature nitide sulla faccia per un contatto positivo e senza scivolamenti delle dita, ma senza bordi affilati che possano abrasire il cuscinetto delle dita. Vite di regolazione dell'eccesso di corsa e chiave esagonale inclusi. La scarpetta del grilletto solido è disponibile in lunghezze Corte e Medie. Il modello personalizzato ha una scarpetta scheletrata e un arco del grilletto extra largo per una maggiore resistenza.
SPECIFICHE: Arco in acciaio inossidabile, scarpetta in alluminio, finitura naturale.
Altro...
Punteggi dei clienti per NIGHTHAWK CUSTOM Solid Trigger, Long
Numero di punteggi: 11
Da brownells.com: 11
Punteggio medio: 4.8
Stock look, Premium Quality.(17.02.2011)
This has been installed on a Springfield Armory 1911 A1 pattern frame. The bow is a perfect fit in my frame with no wobble or slop. The shoe needed a little stoning but that is to be expected, the shoe is the perfect width as there is no wobble or slop there either. The shoe is crimped to the bow rather than pinned and it is a solid unit. I think finding a better trigger than this for the money would be a difficult task.
Great upgrade(22.01.2014)
Used this as part of an upgrade to my Springfield 1911 Mil Spec. Had to slightly file the shoe to make it fit but that's a plus since I could perfectly fit it to my frame and eliminate all slop. The bow fit perfectly in the frame and pulls as smooth as silk. With the set screw in the trigger I was able to eliminate overtravel as well. Fantastic trigger.
Worth the money!(09.11.2009)
Excellent trigger for the money! Works perfect, looks great! Easy to seat your trigger finger into.
Good product(14.03.2010)
Excellent fit in my Combat Comander. Dropped in, not loose and no binding.
Very Nice for the Money(25.10.2010)
I used this trigger in a SS Essex frame Government Model that I built up from scratch. After the frame's trigger channels were coated with Brownell's Gunkote and lapped, trigger feels as if it is on ball bearings. Bow sides are smooth and burr free inside and out; and have no noticeable contact with magazine (trigger pull is same weight and feel with or without mag). Bow length is a little bit long in my frame (could very well be the iffy frame). Works very well once everything (grip safety, sear, thumb safety, hammer, disconnector) was fit together.
Excellent on a SIG GSR compact(20.04.2011)
My gun smith put this in my sig 1911 compact carry and he seemed surprised that no fitting was required. I noticed that it fit snugger than the original with no vertical or horizontal movement
WOW! AWESOME!!!(14.07.2011)
The fitting was perfect on my Colt Commander after squeezing the bow a tiny bit. Now the trigger is extremely smooth, precise, clean, crisp, light, and the annoying rattle and the wobble is gone. This [$]part pimped my Colt Commander to look like a $2500 gun. Buy it, it is worth every penny and you won't regret it.
Great trigger(18.01.2013)
Installed this in my Springfield Mil-Spec. Had to do minor fitting to get it not to stick. Hardly any play vertically or horizontally.
Easy to fit, looks great(27.04.2010)
I put this trigger in my stainless Springfield Mil Spec as part of a "WWI Look" project. It required a small amount of fitting, maybe 20 light file strokes apiece on the top and bottom of the shoe. I think it's a better fit than the factory trigger.
Sweet trigger!!(25.05.2011)
i'm not a gunsmith and this was my first 1911 project that I did the fitting of parts. took me about an hour to figure out what was wrong and how to fix it. its not a drop in for sure on my springfield champion with ed brown beaver tail and safety. trigger bow was too long and had to be filed and polished. grip safety wouldn't work and was blocking the trigger so it would get stuck. had to shorten and polish it also. it looks great and took a lot of play out of the trigger. didn't really effect the trigger job i already had done. can't get over how good it looks. serations on face are done perfect, not too sharp. bow came mirror polished
Quality Item(12.06.2011)
I put this trigger on my SA Mil Spec. The bow was just the right length and I ended up with very little vertical play. Very happy.