Designed For Custom Fitting To Provide A Smooth, No-Slop Pull
The same high-quality match-grade triggers Nighthawk fits to all its custom pistols. Choose from solid or skeletonized shoe. All models have crisp serrations on the face for positive, no-slip finger contact, but no sharp edges to abrade the finger pad. Overtravel adjustment screw and hex wrench also included. Solid trigger shoe comes in Short and Medium lengths. Custom model has skeletonized shoe and an extra-wide trigger bow for extra strength.
Conçu pour un ajustement personnalisé afin d'offrir un tir fluide et sans jeu
Les mêmes gâchettes de qualité match que Nighthawk installe sur toutes ses pistolets personnalisés. Choisissez entre une chaussure solide ou squelettée. Tous les modèles ont des stries nettes sur la face pour un contact positif et sans glissement des doigts, sans bords tranchants pour ne pas abîmer le coussinet du doigt. Une vis de réglage de surcourse et une clé hexagonale sont également incluses. La chaussure de gâchette solide est disponible en longueurs courte et moyenne. Le modèle personnalisé a une chaussure squelettée et un arc de gâchette extra-large pour une résistance supplémentaire.
SPÉCIFICATIONS : Arc en acier inoxydable, chaussure en aluminium, finition naturelle.
Plus...
Évaluations client de NIGHTHAWK CUSTOM SOLID TRIGGER, SHORT
Nombre d'évaluations: 11
De brownells.com: 11
Note moyenne: 4.8
Stock look, Premium Quality.(17.02.2011)
This has been installed on a Springfield Armory 1911 A1 pattern frame. The bow is a perfect fit in my frame with no wobble or slop. The shoe needed a little stoning but that is to be expected, the shoe is the perfect width as there is no wobble or slop there either. The shoe is crimped to the bow rather than pinned and it is a solid unit. I think finding a better trigger than this for the money would be a difficult task.
Great upgrade(22.01.2014)
Used this as part of an upgrade to my Springfield 1911 Mil Spec. Had to slightly file the shoe to make it fit but that's a plus since I could perfectly fit it to my frame and eliminate all slop. The bow fit perfectly in the frame and pulls as smooth as silk. With the set screw in the trigger I was able to eliminate overtravel as well. Fantastic trigger.
Worth the money!(09.11.2009)
Excellent trigger for the money! Works perfect, looks great! Easy to seat your trigger finger into.
Good product(14.03.2010)
Excellent fit in my Combat Comander. Dropped in, not loose and no binding.
Very Nice for the Money(25.10.2010)
I used this trigger in a SS Essex frame Government Model that I built up from scratch. After the frame's trigger channels were coated with Brownell's Gunkote and lapped, trigger feels as if it is on ball bearings. Bow sides are smooth and burr free inside and out; and have no noticeable contact with magazine (trigger pull is same weight and feel with or without mag). Bow length is a little bit long in my frame (could very well be the iffy frame). Works very well once everything (grip safety, sear, thumb safety, hammer, disconnector) was fit together.
Excellent on a SIG GSR compact(20.04.2011)
My gun smith put this in my sig 1911 compact carry and he seemed surprised that no fitting was required. I noticed that it fit snugger than the original with no vertical or horizontal movement
WOW! AWESOME!!!(14.07.2011)
The fitting was perfect on my Colt Commander after squeezing the bow a tiny bit. Now the trigger is extremely smooth, precise, clean, crisp, light, and the annoying rattle and the wobble is gone. This [$]part pimped my Colt Commander to look like a $2500 gun. Buy it, it is worth every penny and you won't regret it.
Great trigger(18.01.2013)
Installed this in my Springfield Mil-Spec. Had to do minor fitting to get it not to stick. Hardly any play vertically or horizontally.
Easy to fit, looks great(27.04.2010)
I put this trigger in my stainless Springfield Mil Spec as part of a "WWI Look" project. It required a small amount of fitting, maybe 20 light file strokes apiece on the top and bottom of the shoe. I think it's a better fit than the factory trigger.
Sweet trigger!!(25.05.2011)
i'm not a gunsmith and this was my first 1911 project that I did the fitting of parts. took me about an hour to figure out what was wrong and how to fix it. its not a drop in for sure on my springfield champion with ed brown beaver tail and safety. trigger bow was too long and had to be filed and polished. grip safety wouldn't work and was blocking the trigger so it would get stuck. had to shorten and polish it also. it looks great and took a lot of play out of the trigger. didn't really effect the trigger job i already had done. can't get over how good it looks. serations on face are done perfect, not too sharp. bow came mirror polished
Quality Item(12.06.2011)
I put this trigger on my SA Mil Spec. The bow was just the right length and I ended up with very little vertical play. Very happy.
Référence: 100003273 NIGHTHAWK CUSTOM SOLID TRIGGER, SHORT Ref Fabricant: SP0464080683000658 Les mêmes gâchettes de qualité match que Nighthawk installe sur toutes ses pistolets personnalisés. Choisissez entre une chaussure solide ou squelettée. Tous les modèles ont des stries nettes sur la face pour un contact positif et sans glissement des doigts, sans bords tranchants pour ne pas abîmer le coussinet du doigt. Une vis de réglage de surcourse et une clé hexagonale sont également incluses. La chaussure de gâchette solide est disponible en longueurs courte et moyenne. Le modèle personnalisé a une chaussure squelettée et un arc de gâchette extra-large pour une résistance supplémentaire.
48.9CHF2CHF 48.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.c
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Sale
Référence: 100003271 NIGHTHAWK CUSTOM Solid Trigger, Long Ref Fabricant: SP0461080683000634 Les mêmes gâchettes de qualité match que Nighthawk installe sur toutes ses pistolets personnalisés. Choisissez entre une chaussure solide ou squelettée. Tous les modèles ont des stries nettes sur la face pour un contact positif et sans glissement des doigts, sans bords tranchants pour ne pas abîmer le coussinet du doigt. Une vis de réglage de surcourse et une clé hexagonale sont également incluses. La chaussure de gâchette solide est disponible en longueurs courte et moyenne. Le modèle personnalisé a une chaussure squelettée et un arc de gâchette extra-large pour une résistance supplémentaire.
34.38CHF1CHF 34.38
*CHF 42.96
Délai de livraison environ 2-4 jours à partir de l'entrepôt local.
Référence: 100003270 NIGHTHAWK CUSTOM CUSTOM TRIGGER Ref Fabricant: SP0463080683000641 Les mêmes gâchettes de qualité match que Nighthawk installe sur toutes ses pistolets personnalisés. Choisissez entre une chaussure solide ou squelettée. Tous les modèles ont des stries nettes sur la face pour un contact positif et sans glissement des doigts, sans bords tranchants pour ne pas abîmer le coussinet du doigt. Une vis de réglage de surcourse et une clé hexagonale sont également incluses. La chaussure de gâchette solide est disponible en longueurs courte et moyenne. Le modèle personnalisé a une chaussure squelettée et un arc de gâchette extra-large pour une résistance supplémentaire.
47.9CHF2CHF 47.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 100003272 NIGHTHAWK CUSTOM SOLID TRIGGER, MEDIUM Ref Fabricant: SP0462080683001662 Les mêmes gâchettes de qualité match que Nighthawk installe sur toutes ses pistolets personnalisés. Choisissez entre une chaussure solide ou squelettée. Tous les modèles ont des stries nettes sur la face pour un contact positif et sans glissement des doigts, sans bords tranchants pour ne pas abîmer le coussinet du doigt. Une vis de réglage de surcourse et une clé hexagonale sont également incluses. La chaussure de gâchette solide est disponible en longueurs courte et moyenne. Le modèle personnalisé a une chaussure squelettée et un arc de gâchette extra-large pour une résistance supplémentaire.
49.9CHF1CHF 49.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Designed For Custom Fitting To Provide A Smooth, No-Slop Pull
The same high-quality match-grade triggers Nighthawk fits to all its custom pistols. Choose from solid or skeletonized shoe. All models have crisp serrations on the face for positive, no-slip finger contact, but no sharp edges to abrade the finger pad. Overtravel adjustment screw and hex wrench also included. Solid trigger shoe comes in Short and Medium lengths. Custom model has skeletonized shoe and an extra-wide trigger bow for extra strength.
Conçu pour un ajustement personnalisé afin d'offrir un tir fluide et sans jeu
Les mêmes gâchettes de qualité match que Nighthawk installe sur toutes ses pistolets personnalisés. Choisissez entre une chaussure solide ou squelettée. Tous les modèles ont des stries nettes sur la face pour un contact positif et sans glissement des doigts, sans bords tranchants pour ne pas abîmer le coussinet du doigt. Une vis de réglage de surcourse et une clé hexagonale sont également incluses. La chaussure de gâchette solide est disponible en longueurs courte et moyenne. Le modèle personnalisé a une chaussure squelettée et un arc de gâchette extra-large pour une résistance supplémentaire.
SPÉCIFICATIONS : Arc en acier inoxydable, chaussure en aluminium, finition naturelle.
Plus...
Évaluations client de NIGHTHAWK CUSTOM SOLID TRIGGER, SHORT
Nombre d'évaluations: 11
De brownells.com: 11
Note moyenne: 4.8
Stock look, Premium Quality.(17.02.2011)
This has been installed on a Springfield Armory 1911 A1 pattern frame. The bow is a perfect fit in my frame with no wobble or slop. The shoe needed a little stoning but that is to be expected, the shoe is the perfect width as there is no wobble or slop there either. The shoe is crimped to the bow rather than pinned and it is a solid unit. I think finding a better trigger than this for the money would be a difficult task.
Great upgrade(22.01.2014)
Used this as part of an upgrade to my Springfield 1911 Mil Spec. Had to slightly file the shoe to make it fit but that's a plus since I could perfectly fit it to my frame and eliminate all slop. The bow fit perfectly in the frame and pulls as smooth as silk. With the set screw in the trigger I was able to eliminate overtravel as well. Fantastic trigger.
Worth the money!(09.11.2009)
Excellent trigger for the money! Works perfect, looks great! Easy to seat your trigger finger into.
Good product(14.03.2010)
Excellent fit in my Combat Comander. Dropped in, not loose and no binding.
Very Nice for the Money(25.10.2010)
I used this trigger in a SS Essex frame Government Model that I built up from scratch. After the frame's trigger channels were coated with Brownell's Gunkote and lapped, trigger feels as if it is on ball bearings. Bow sides are smooth and burr free inside and out; and have no noticeable contact with magazine (trigger pull is same weight and feel with or without mag). Bow length is a little bit long in my frame (could very well be the iffy frame). Works very well once everything (grip safety, sear, thumb safety, hammer, disconnector) was fit together.
Excellent on a SIG GSR compact(20.04.2011)
My gun smith put this in my sig 1911 compact carry and he seemed surprised that no fitting was required. I noticed that it fit snugger than the original with no vertical or horizontal movement
WOW! AWESOME!!!(14.07.2011)
The fitting was perfect on my Colt Commander after squeezing the bow a tiny bit. Now the trigger is extremely smooth, precise, clean, crisp, light, and the annoying rattle and the wobble is gone. This [$]part pimped my Colt Commander to look like a $2500 gun. Buy it, it is worth every penny and you won't regret it.
Great trigger(18.01.2013)
Installed this in my Springfield Mil-Spec. Had to do minor fitting to get it not to stick. Hardly any play vertically or horizontally.
Easy to fit, looks great(27.04.2010)
I put this trigger in my stainless Springfield Mil Spec as part of a "WWI Look" project. It required a small amount of fitting, maybe 20 light file strokes apiece on the top and bottom of the shoe. I think it's a better fit than the factory trigger.
Sweet trigger!!(25.05.2011)
i'm not a gunsmith and this was my first 1911 project that I did the fitting of parts. took me about an hour to figure out what was wrong and how to fix it. its not a drop in for sure on my springfield champion with ed brown beaver tail and safety. trigger bow was too long and had to be filed and polished. grip safety wouldn't work and was blocking the trigger so it would get stuck. had to shorten and polish it also. it looks great and took a lot of play out of the trigger. didn't really effect the trigger job i already had done. can't get over how good it looks. serations on face are done perfect, not too sharp. bow came mirror polished
Quality Item(12.06.2011)
I put this trigger on my SA Mil Spec. The bow was just the right length and I ended up with very little vertical play. Very happy.