Replaces Every Pin In the Pistol; Heat-Hardened For Strength & Durability
Complete set of the 11 precision-ground pins and plungers for refurbishing an existing 1911 or for building a new one from scratch. Heat-treated for superb resistance to surface-wear for a long service life. Available in matte blued carbon steel or natural-finish stainless steel.
SPECS: Heat-treated carbon steel (CS), blued, or stainless steel (SS), natural finish. Set includes solid ejector pin, sear pin, hammer pin, hammer strut pin, barrel link pin, slide stop plunger, thumb safety plunger, mainspring cap, mainspring cap pin, mainspring retainer pin, and mainspring housing pin. Fits 1911 Government Model and Commander and clones; will not fit Officers model.
Altro...
Sostituisce ogni Pin la pistola; Calore-indurito per forza & durabilità
Set completo di 11 perni rettificati di precisione e stantuffi per ristrutturare un esistente 1911 o per la costruzione di uno nuovo da zero. Trattato termicamente per superba resistenza all'usura-superficie per una lunga durata. Disponibile in acciaio al carbonio brunita opaca o naturale-finitura acciaio inox.
Specifiche: acciaio al carbonio trattato termicamente (CS), azzurrate, o in acciaio inossidabile (SS), naturale finitura. Set comprende solido perno, perno scottare, perno del martello, martello puntone pin, pin collegamento canna, stantuffo fermata diapositiva, stantuffo sicurezza pollice, cappuccio molla principale, perno tappo molla principale, perno fermo molla principale e drizzando alloggiamento pin. Modello di governo si inserisce 1911 e comandante e cloni; non si adatta il modello ufficiali.
Altro...
Punteggi dei clienti per CASPIAN 1911 PIN SET, CS
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 3
Buyer Beware(27.12.2011)
I bought this set of pins to finish out a 1911 build I'm doing for my wife. I ordered the Caspian Race Ready Receiver (168-100-110) for the build, so I figured I'd order this pin set since it's made by the same manufacturer. The ejector pin in this set is solid, and I think it's slightly oversize, as it bent while I was trying to install it into the ejector pin hole (yes, I had done the requisite notching of the ejector post, and there was no blocking of the hole when I looked thru it; I also should have measured the diameter of the pin against the diameter of the hole--I really think a roll pin is better for this application).
Additionally, if you decide to use the Cylinder and Slide Professional Trigger Kit (206-000-019), the hammer strut pin in this set is too large (the pin is .095 and the hole in the hammer is about .093). I reamed out the hole in the hammer, but it was still a very hard pin to drive in.
In the future, I will probably order a different set of pins. I may or may not order Caspian pins again, I haven't yet decided. The mainspring parts are all fine, as are the plunger pins and the sear and hammer pins.
I want to caveat the "Would you recommend this to a friend" question by saying I would recommend it, but I would also tell them what I experienced.
N. prodotto: 168000128 CASPIAN 1911 PIN SET, CS Parti Fabbricante: P28BC Set completo di 11 perni rettificati di precisione e stantuffi per ristrutturare un esistente 1911 o per la costruzione di uno nuovo da zero. Trattato termicamente per superba resistenza all'usura-superficie per una lunga durata. Disponibile in acciaio al carbonio brunita opaca o naturale-finitura acciaio inox.
29.61CHF2CHF 29.61
*CHF 46.90
Tempi di consegna circa 2-4 giorni dal magazzino locale.
Adatto per:
1911
Modello:
Commander,Government
Peso della spedizione: 0.018kgLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 168000127 CASPIAN 1911 PIN SET, SS Parti Fabbricante: P28SC Set completo di 11 perni rettificati di precisione e stantuffi per ristrutturare un esistente 1911 o per la costruzione di uno nuovo da zero. Trattato termicamente per superba resistenza all'usura-superficie per una lunga durata. Disponibile in acciaio al carbonio brunita opaca o naturale-finitura acciaio inox.
54.9CHF5CHF 54.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Replaces Every Pin In the Pistol; Heat-Hardened For Strength & Durability
Complete set of the 11 precision-ground pins and plungers for refurbishing an existing 1911 or for building a new one from scratch. Heat-treated for superb resistance to surface-wear for a long service life. Available in matte blued carbon steel or natural-finish stainless steel.
SPECS: Heat-treated carbon steel (CS), blued, or stainless steel (SS), natural finish. Set includes solid ejector pin, sear pin, hammer pin, hammer strut pin, barrel link pin, slide stop plunger, thumb safety plunger, mainspring cap, mainspring cap pin, mainspring retainer pin, and mainspring housing pin. Fits 1911 Government Model and Commander and clones; will not fit Officers model.
Altro...
Sostituisce ogni Pin la pistola; Calore-indurito per forza & durabilità
Set completo di 11 perni rettificati di precisione e stantuffi per ristrutturare un esistente 1911 o per la costruzione di uno nuovo da zero. Trattato termicamente per superba resistenza all'usura-superficie per una lunga durata. Disponibile in acciaio al carbonio brunita opaca o naturale-finitura acciaio inox.
Specifiche: acciaio al carbonio trattato termicamente (CS), azzurrate, o in acciaio inossidabile (SS), naturale finitura. Set comprende solido perno, perno scottare, perno del martello, martello puntone pin, pin collegamento canna, stantuffo fermata diapositiva, stantuffo sicurezza pollice, cappuccio molla principale, perno tappo molla principale, perno fermo molla principale e drizzando alloggiamento pin. Modello di governo si inserisce 1911 e comandante e cloni; non si adatta il modello ufficiali.
Altro...
Punteggi dei clienti per CASPIAN 1911 PIN SET, CS
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 3
Buyer Beware(27.12.2011)
I bought this set of pins to finish out a 1911 build I'm doing for my wife. I ordered the Caspian Race Ready Receiver (168-100-110) for the build, so I figured I'd order this pin set since it's made by the same manufacturer. The ejector pin in this set is solid, and I think it's slightly oversize, as it bent while I was trying to install it into the ejector pin hole (yes, I had done the requisite notching of the ejector post, and there was no blocking of the hole when I looked thru it; I also should have measured the diameter of the pin against the diameter of the hole--I really think a roll pin is better for this application).
Additionally, if you decide to use the Cylinder and Slide Professional Trigger Kit (206-000-019), the hammer strut pin in this set is too large (the pin is .095 and the hole in the hammer is about .093). I reamed out the hole in the hammer, but it was still a very hard pin to drive in.
In the future, I will probably order a different set of pins. I may or may not order Caspian pins again, I haven't yet decided. The mainspring parts are all fine, as are the plunger pins and the sear and hammer pins.
I want to caveat the "Would you recommend this to a friend" question by saying I would recommend it, but I would also tell them what I experienced.