Easily Removes Broken Cases Without Field Stripping
Case head separation from over-fired or out of spec brass won’t ruin your shooting experience if you keep one of these handy tools in your pocket or field kit. Hardened, steel tool reliably and easily removes broken cases from AR-type or any other firearm chambered for the .223/5.56 NATO or .308/7.62 NATO cartridges. Exclusive, threaded, two-piece design is adjustable for overall length, so the tool completely engages the rim of the case mouth; cannot slip through or strip out. Very simple to use, drop the broken shell extractor into the chamber directly inside the broken case. Allow the bolt to close so the extractor engages the rim of the tool and draw back the bolt to open the chamber. The broken case will eject along with the broken shell extractor.
SPECS: Steel, blue. Models for .223 Remington/5.56 NATO or .308 Winchester/7.62 NATO cartridges.
Plus...
Retire facilement les douilles cassées sans démontage sur le terrain
La séparation de la tête de douille due à des cartouches surmoulées ou hors spécifications ne ruinera pas votre expérience de tir si vous gardez cet outil pratique dans votre poche ou votre kit de terrain. Cet outil en acier trempé retire de manière fiable et facile les douilles cassées des armes de type AR ou de toute autre arme chambrée pour les cartouches .223/5.56 NATO ou .308/7.62 NATO. Son design exclusif, en deux parties et fileté, est ajustable en longueur totale, permettant à l'outil d'engager complètement le rebord de l'embouchure de la douille ; il ne peut pas glisser ni se dénuder. Très simple à utiliser, il suffit de placer l'extracteur de douille cassée dans la chambre directement à l'intérieur de la douille cassée. Laissez la culasse se fermer pour que l'extracteur engage le rebord de l'outil, puis tirez la culasse en arrière pour ouvrir la chambre. La douille cassée sera éjectée avec l'extracteur de douille cassée.
SPÉCIFICATIONS : Acier, bleu. Modèles pour cartouches .223 Remington/5.56 NATO ou .308 Winchester/7.62 NATO.
Plus...
Évaluations client de BROWNELLS .308 BROKEN SHELL EXTRACTOR
Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 4.8
A Lifesaver!(10.10.2014)
A lousy TulAmmo steel shell (1st and LAST round of that I'll ever use) separated around the rim in my 7.62 AR. Insert into broken shell with the rifle assembled & @ inspection; you need the bolt to drive it home. It took effort to get the extractor set correctly in the shell (had to drive it in hard and splay the tips out to shoulder the shell properly). The 3rd try finally got it loose, but I had to use a cleaning rod & plastic collet to help it out in the end. The bolt took some edge off of the extractor's rim while driving it in; it is probably only good for a few attempts. A good gunsmith's rod & collet set is likely more effective & durable, but this is a MUST for a field kit. Saved me a trip to the gunsmith!
Perfect(25.08.2015)
Worked absolutely perfectly!
Safe Insurance(04.07.2017)
Works well, don't need a cleaning rod to use.
A MUST FOR AR-15 SHOOTERS(12.12.2009)
IF YOU BREAK THE BACK OFF A SHELL IN YOUR GUN YOUR IN TROUBLE. DONT TRY AND PUSH IT OUT WITH A CLEANING ROD, YOU COULD SCRATCH THE BORE. USE ONE OF THESE EXTRACTORS, JUST PUT IT IN THE RECEIVER LIKE YOU WOULD A LOADED ROUND AND EJECT THE BROKEN CASE. EVERY AR SHOOTER SHOULD HAVE ONE IN THERE KIT.
What a life saver!(01.05.2010)
I just got home from our 3 gun shoot and would have been shut down with a stuck case on the first stage if a friend didn't have one of these in his goodie bag. Took it out of the package and got my case removed without any problems even though I had never even seen one before and was back in the game. I even won my class!! I'll be buying my own directly.
This one works(22.07.2010)
I had a second broken shell to extract. I tried an extractor from another maker that completely failed to remove my first broken shell. When this break happened, I ordered this extractor after seeing its design is quite different.
This one simply works.
The design of the prongs makes it much easier for the tool to engage the shell and they can be spread slightly to engage more authoritatively. Also, this tool actually fit the bolt (unlike the other tool I tried) allowing the bolt to pull the tool from the chamber. I would definitely recommend every AR shooter keep one of these in their range bag.
One note: Be sure the rubber O-ring is set in the tool before use. Otherwise the extractor will seat too deeply into the chamber requiring the user to tap it out with a rod rather than have the bolt engage.
Works(23.06.2011)
Easy to use, easy to store in the VDG on your AR15.
Broken Shell Exatractor a must have(04.07.2013)
Any AR shooter will tell you that this item is a must have if you ever shoot Mil Grade ammo or the bargan brands, quick fix and a headache saver!
This item works.(08.02.2014)
Well designed product that removes the shell case as advertised.
Référence: 080000530 BROWNELLS .308 BROKEN SHELL EXTRACTOR050806006300 La séparation de la tête de douille due à des cartouches surmoulées ou hors spécifications ne ruinera pas votre expérience de tir si vous gardez cet outil pratique dans votre poche ou votre kit de terrain. Cet outil en acier trempé retire de manière fiable et facile les douilles cassées des armes de type AR ou de toute autre arme chambrée pour les cartouches .223/5.56 NATO ou .308/7.62 NATO. Son design exclusif, en deux parties et fileté, est ajustable en longueur totale, permettant à l'outil d'engager complètement le rebord de l'embouchure de la douille ; il ne peut pas glisser ni se dénuder. Très simple à utiliser, il suffit de placer l'extracteur de douille cassée dans la chambre directement à l'intérieur de la douille cassée. Laissez la culasse se fermer pour que l'extracteur engage le rebord de l'outil, puis tirez la culasse en arrière pour ouvrir la chambre. La douille cassée sera éjectée avec l'extracteur de douille cassée.
59.9CHF0CHF 59.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Caractéristiques:Calibre: 30 Caliber (.308)Manufacture: Universel Arme de Poing
Cet extracteur de douilles cassées est idéal pour retirer facilement les douilles cassées des armes AR et autres armes chambrées en .223/5.56 NATO ou .308/7.62 NATO.
Son design en deux pièces empêche le glissement et assure un engagement complet avec le rebord de la douille.
Il suffit de placer l'outil dans la chambre, de fermer le verrou et de tirer pour éjecter la douille cassée.
Référence: 080000441 BROWNELLS .223 BROKEN SHELL EXTRACTOR050806006140 La séparation de la tête de douille due à des cartouches surmoulées ou hors spécifications ne ruinera pas votre expérience de tir si vous gardez cet outil pratique dans votre poche ou votre kit de terrain. Cet outil en acier trempé retire de manière fiable et facile les douilles cassées des armes de type AR ou de toute autre arme chambrée pour les cartouches .223/5.56 NATO ou .308/7.62 NATO. Son design exclusif, en deux parties et fileté, est ajustable en longueur totale, permettant à l'outil d'engager complètement le rebord de l'embouchure de la douille ; il ne peut pas glisser ni se dénuder. Très simple à utiliser, il suffit de placer l'extracteur de douille cassée dans la chambre directement à l'intérieur de la douille cassée. Laissez la culasse se fermer pour que l'extracteur engage le rebord de l'outil, puis tirez la culasse en arrière pour ouvrir la chambre. La douille cassée sera éjectée avec l'extracteur de douille cassée.
26.2CHF2CHF 26.20
*CHF 34.90
Délai de livraison environ 2-4 jours à partir de l'entrepôt local.
Caractéristiques:Calibre: 22 Caliber (.223-.224)Manufacture: Universel Arme de Poing
Easily Removes Broken Cases Without Field Stripping
Case head separation from over-fired or out of spec brass won’t ruin your shooting experience if you keep one of these handy tools in your pocket or field kit. Hardened, steel tool reliably and easily removes broken cases from AR-type or any other firearm chambered for the .223/5.56 NATO or .308/7.62 NATO cartridges. Exclusive, threaded, two-piece design is adjustable for overall length, so the tool completely engages the rim of the case mouth; cannot slip through or strip out. Very simple to use, drop the broken shell extractor into the chamber directly inside the broken case. Allow the bolt to close so the extractor engages the rim of the tool and draw back the bolt to open the chamber. The broken case will eject along with the broken shell extractor.
SPECS: Steel, blue. Models for .223 Remington/5.56 NATO or .308 Winchester/7.62 NATO cartridges.
Plus...
Retire facilement les douilles cassées sans démontage sur le terrain
La séparation de la tête de douille due à des cartouches surmoulées ou hors spécifications ne ruinera pas votre expérience de tir si vous gardez cet outil pratique dans votre poche ou votre kit de terrain. Cet outil en acier trempé retire de manière fiable et facile les douilles cassées des armes de type AR ou de toute autre arme chambrée pour les cartouches .223/5.56 NATO ou .308/7.62 NATO. Son design exclusif, en deux parties et fileté, est ajustable en longueur totale, permettant à l'outil d'engager complètement le rebord de l'embouchure de la douille ; il ne peut pas glisser ni se dénuder. Très simple à utiliser, il suffit de placer l'extracteur de douille cassée dans la chambre directement à l'intérieur de la douille cassée. Laissez la culasse se fermer pour que l'extracteur engage le rebord de l'outil, puis tirez la culasse en arrière pour ouvrir la chambre. La douille cassée sera éjectée avec l'extracteur de douille cassée.
SPÉCIFICATIONS : Acier, bleu. Modèles pour cartouches .223 Remington/5.56 NATO ou .308 Winchester/7.62 NATO.
Plus...
Évaluations client de BROWNELLS .308 BROKEN SHELL EXTRACTOR
Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 4.8
A Lifesaver!(10.10.2014)
A lousy TulAmmo steel shell (1st and LAST round of that I'll ever use) separated around the rim in my 7.62 AR. Insert into broken shell with the rifle assembled & @ inspection; you need the bolt to drive it home. It took effort to get the extractor set correctly in the shell (had to drive it in hard and splay the tips out to shoulder the shell properly). The 3rd try finally got it loose, but I had to use a cleaning rod & plastic collet to help it out in the end. The bolt took some edge off of the extractor's rim while driving it in; it is probably only good for a few attempts. A good gunsmith's rod & collet set is likely more effective & durable, but this is a MUST for a field kit. Saved me a trip to the gunsmith!
Perfect(25.08.2015)
Worked absolutely perfectly!
Safe Insurance(04.07.2017)
Works well, don't need a cleaning rod to use.
A MUST FOR AR-15 SHOOTERS(12.12.2009)
IF YOU BREAK THE BACK OFF A SHELL IN YOUR GUN YOUR IN TROUBLE. DONT TRY AND PUSH IT OUT WITH A CLEANING ROD, YOU COULD SCRATCH THE BORE. USE ONE OF THESE EXTRACTORS, JUST PUT IT IN THE RECEIVER LIKE YOU WOULD A LOADED ROUND AND EJECT THE BROKEN CASE. EVERY AR SHOOTER SHOULD HAVE ONE IN THERE KIT.
What a life saver!(01.05.2010)
I just got home from our 3 gun shoot and would have been shut down with a stuck case on the first stage if a friend didn't have one of these in his goodie bag. Took it out of the package and got my case removed without any problems even though I had never even seen one before and was back in the game. I even won my class!! I'll be buying my own directly.
This one works(22.07.2010)
I had a second broken shell to extract. I tried an extractor from another maker that completely failed to remove my first broken shell. When this break happened, I ordered this extractor after seeing its design is quite different.
This one simply works.
The design of the prongs makes it much easier for the tool to engage the shell and they can be spread slightly to engage more authoritatively. Also, this tool actually fit the bolt (unlike the other tool I tried) allowing the bolt to pull the tool from the chamber. I would definitely recommend every AR shooter keep one of these in their range bag.
One note: Be sure the rubber O-ring is set in the tool before use. Otherwise the extractor will seat too deeply into the chamber requiring the user to tap it out with a rod rather than have the bolt engage.
Works(23.06.2011)
Easy to use, easy to store in the VDG on your AR15.
Broken Shell Exatractor a must have(04.07.2013)
Any AR shooter will tell you that this item is a must have if you ever shoot Mil Grade ammo or the bargan brands, quick fix and a headache saver!
This item works.(08.02.2014)
Well designed product that removes the shell case as advertised.