Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 399 CHF

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

HARRIS GUNWORKS
SAKO-STYLE EXTRACTOR KIT

562102000

Convert Remington Bolts For Reliable Extraction

Complete parts kit converts Remington 700 bolts to use a larger, Sako-style extractor which grabs a bigger bite of case rim for increased extractor performance.

SPECS: 17-4 stainless steel extractor. Kit includes extractor, plunger pin and spring. Installation requires machining of bolt. .308 is .234" wide and suitable for cartridges from .308 Win through .505 Gibbs. .223 is .170 wide. Suitable for .223 based and other small rimmed cartridges.

Plus...

Convertissez les culasses Remington pour une extraction fiable

Le kit de pièces complet convertit les culasses Remington 700 pour utiliser un extracteur de style Sako plus grand, qui prend une plus grande prise sur le rebord de la cartouche pour une performance d'extraction améliorée.

SPECS : Extracteur en acier inoxydable 17-4. Le kit comprend l'extracteur, la goupille de poussée et le ressort. L'installation nécessite un usinage de la culasse. Le modèle .308 mesure .234" de large et convient aux cartouches allant de .308 Win à .505 Gibbs. Le modèle .223 mesure .170 de large. Convient aux cartouches basées sur .223 et autres petites cartouches à bourrelet.

Plus...

Évaluations client de HARRIS GUNWORKS .308 SAKO-STYLE EXTRACTOR KIT

Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 2.7

arris Sako Style Extractor (25.10.2009)

I have installed several of these, both on std and magnum rifles and have found that the extractor spring seems to be weak. Also, the "tongue" on the exractor plunger, if drilled where indicated, will not put enough force on the top rim of the extractor to hold the cartridge well enough to allow reliable extraction.

I have moved the pluger hole off bottom about .005-.008" and found that helped some. In most cases, I have had to reshape the plunger also to get it to function at all.

The design is great - but it takes a lot of effort to get it to work.

I will be calling the manufacturer for their input.

Harris kit comes with bad instructions (14.06.2016)

These kits have been backordered for ages and now that we've received them we are highly disappointed in the instructions that they came with. The directions clearly indicate drilling with a drill bit smaller than the size of the stud/pin on the extractor. The dimension on the milling slot is wrong. That leads to the placement of the hole being off from their numbers as well.

We have contacted Harris Barrelworks to discuss the issues and get an update on what percent oversized the stud/pin hole is meant to be over the stud dimension. Unfortunately the person who designed them and knows best is out of the shop and will not be able to get back to us for at least a week. All in all, these errors in the written instructions leave us with less faith in the overall product.

The past '09 review by Butch was in line with our past experiences with previously available products, but as of now we don't think an alteration to the extractor to fit will be necessary like it used to be. Of course, until we get the correct numbers lined out we won't know for sure.

I installed it myself. (23.02.2016)

You MUST have a milling machine to install this. You CANNOT do it on a drill press. It is not for the 1st time user. you have to have experience in installing one. if you screw it up, you will need a new bolt. That being said. it works great, better than the Remington style. Gave it 4 stars. just because of the amount of machining and fixtures needed to do it.

<img width="500" src='/userdocs/reviewimages/e07d0c07-a9fa-4b60-83c1-d3d118b30786.jpg' alt=''>

Lire 3 plus d'avis sur brownells.com

0 0 2 CHF

Référence: 562102000
HARRIS GUNWORKS .308 SAKO-STYLE EXTRACTOR KIT
Ref Fabricant: NONE Le kit de pièces complet convertit les culasses Remington 700 pour utiliser un extracteur de style Sako plus grand, qui prend une plus grande prise sur le rebord de la cartouche pour une performance d'extraction améliorée.

Avertir lorsque l'article est disponible

Pas disponible.

Caractéristiques: Manufacture: Remington Modèle: 700

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Manufacture: Remington Modèle: 700 Poids du colis: 0.009kg Hauteur d'expédition: 3mm Largeur d'expédition: 48mm Longueur d'expédition: 94mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x

Référence: 562102001
HARRIS GUNWORKS .223 SAKO-STYLE EXTRACTOR KIT
Ref Fabricant: NONE Le kit de pièces complet convertit les culasses Remington 700 pour utiliser un extracteur de style Sako plus grand, qui prend une plus grande prise sur le rebord de la cartouche pour une performance d'extraction améliorée.

Avertir lorsque l'article est disponible

Pas disponible.

Caractéristiques: Manufacture: Remington Modèle: 700

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Améliorez votre Remington 700 avec le SAKO-STYLE EXTRACTOR KIT! 🔧 Profitez d'une extraction optimisée pour vos cartouches .308 et plus.

Convert Remington Bolts For Reliable Extraction

Complete parts kit converts Remington 700 bolts to use a larger, Sako-style extractor which grabs a bigger bite of case rim for increased extractor performance.

Plus...

Convertissez les culasses Remington pour une extraction fiable

Plus...