Add all the convenience of drop-free, box magazine to your favorite Remington 700 BDL. Spring-loaded finger latch inside the triggerguard drops the box magazine free, speeds loading and unloading. Made from durable stainless steel and finished with bake-on, matte, black Teflon® coating that's self-lubricating and resists scratches and wear. Updated version have positive locking springs on the bottom of both sides of the floor plate (holds the magazine box securely in place without the rubber o-ring), a polymer boot on bottom of box (easier to remove), and a guide slot and larger rear catch on back of box (ensures proper latch).
SPECS: Stainless steel, black, matte finish. 9.3 oz.(265 g) approximate wt. Fits H.S. Precision 2000 and Rem. 700 BDL long and short actions. Will fit Rem. ADL with modifications to stock. May require gunsmithing/fitting. Magazine Capacity – Five rounds with .223, .222 & .204, four rounds with standard calibers, ten rounds available for 308 and similar calibers, three or eight rounds with magnum calibers (8rd magazine holds 7 or 8, depending on cartridge).
Plus...
Ajoute toute la commodité d'un chargeur à boîte détachable à ton Remington 700 BDL préféré. Le loquet à ressort à l'intérieur du pontet libère le chargeur à boîte, facilitant le chargement et le déchargement. Fabriqué en acier inoxydable durable et fini avec un revêtement Teflon® noir mat cuit au four, qui est auto-lubrifiant et résiste aux rayures et à l'usure. La version mise à jour dispose de ressorts de verrouillage positifs en bas des deux côtés de la plaque de fond (maintient le chargeur en place sans l'anneau en caoutchouc), d'une botte en polymère au bas de la boîte (plus facile à retirer), et d'une fente de guidage et d'un crochet arrière plus grand à l'arrière de la boîte (assure un verrouillage correct).
SPECS : Acier inoxydable, noir, finition mate. Poids approximatif de 9,3 oz (265 g). S'adapte aux actions longues et courtes H.S. Precision 2000 et Rem. 700 BDL. Peut s'adapter au Rem. ADL avec des modifications au bois. Peut nécessiter un travail de gunsmithing/ajustement. Capacité du chargeur – Cinq cartouches avec .223, .222 & .204, quatre cartouches avec des calibres standards, dix cartouches disponibles pour 308 et calibres similaires, trois ou huit cartouches avec des calibres magnum (le chargeur de 8 cartouches contient 7 ou 8, selon la cartouche).
Plus...
Évaluations client de H-S PRECISION SHORT ACTION MAGAZINE 308
Nombre d'évaluations: 8
De brownells.com: 8
Note moyenne: 3.8
Better than I expected!(28.12.2013)
This was listed as a drop in kit. But on my Remington 700 bdl, this was not the case. I needed to do a good deal of inletting and relief work to seat this kit properly. No modifying of the kit itself was needed. I used my dremmel tool and slow removal of material until I had a sound fit. Once the main body was seated there were gaps around the edges. I will be using Brownells stainless steel bedding kit to fill these gaps and insure nothing will move about. This kit allows flawless feeding of ammo to battery, and is of better quality than I had anticipated.
Just what I was hoping it would be.(21.05.2014)
I purchased this to upgrade my Remington 700 ADL to a Hogue BDL Stock + the Detachable Magazine. First is that with this Hogue stock I had to do some minor filing and fitting. It does not drop in. It is worth the work and not too hard, if you take your time. It is a great fit and improvement over firing one round at a time. Parts quality is the best I've seen. If you are the patient type you will not be disappointed.
Complete garbage(14.11.2014)
I have a H-S precision stock and this bolts in great and that's it. The rest of the product fails in historic proportions. The bullets don't feed at all. The last round never comes out of the magazine cleanly ever! I am extremely disappointed in this product especially for how much it costs and the "reputation" H-S precision has....
Also if you are a precision shooter and think your hand loads will fit. Think again. I had to the shorten the overal length to get the round to fit in the magazine itself. Again I would NEVER RECOMMEND this to anyone.
Works perfectly(12.05.2015)
I have this system with 5- and 10-round H-S magazines, fitted into the H-S Precision stock that comes from Remington as part of their Model 5R Milspec. While the system is not drop-in, it is *almost* drop-in. The only conflict is the internal latch that holds onto the magazine. When you release the latch moves outward and this conflicts with the stock crosspiece. I got out a riffler file and made a slim diagonal channel in the soft crosspiece material (no neet to touch the aluminum chassis underneath) and in 10 minutes I had a perfect drop-in fit. On my Manners T5A the same fitment is required, plus a slight enlargement of the rearmost portion of the mag well. Manners will perform this themselves at no cost on a BDL-inlet stock if you ask them at time of purchase.
As to functionality, it is perfect. If your rounds don't fit this magazine then they don't fit any magazine. then they must not conform to 7.62 NATO specs. I have run several types of ammo plus handloads with an OALT of 2.793" and they fit fine. 145gr commercial ammo has a bunch of extra room. 175gr commercial match ammo not so much, but it fits.
Very good product (09.04.2016)
Was very easy to install. Took about 30 mins. Small file and a little time. Fits perfectly. Loads perfectly. Well worth the little time and money.
Box magazine conversion #1 upgrade !!(29.07.2013)
Generation 2 of this product is vastly superior to the original. Less noise, more positive lock, and polymer boot to prevent damage when dropped. Easy to install, no fitting necessary.
Requires Gunsmithing(30.09.2013)
This part required a gunsmith to install on a Remington PSS with the H-S precision stock. Had to opened up with a mill.
The mags will not retain and feed rounds reliably without being tuned. The lips are far too wide apart and are flat, as opposed to curved, which would feed better.
The AI variants are much better products and better quality as well.
Great looking product!(12.08.2015)
Did my homework and selected this product for my Rem 700 Sendero based on reviews. When I installed it my first problem was the front action screw now intruded into the action and prevented the bolt from closing. The second issue was the back of the magazine made contact with the lower back bridge of the action and therefore was difficult to install and wouldn't drop from the action when the release was pressed. I installed a .012 shim to correct the problem but then had a problem feeding the last round, (yep, all it takes it .012 to jack it up). I almost sent it back but decided to try removing .015 from the front action screw. The bolt can now close and after testing over three ten round mags I can say it feeds correctly. In defense of HS Precision I seem to always have weird problems when buying and installing stuff like this. I would give it five stars if instructions addressing how to resolve potential problems had been included. I expect it to work as advertised and will repost if I have any major failures. I like that it's a double stack mag and think it's the best looking of all the DBM's on the market.
Référence: 393000031 H-S PRECISION SHORT ACTION MAGAZINE 308 Ref Fabricant: AP305 Ajoute toute la commodité d'un chargeur à boîte détachable à ton Remington 700 BDL préféré. Le loquet à ressort à l'intérieur du pontet libère le chargeur à boîte, facilitant le chargement et le déchargement. Fabriqué en acier inoxydable durable et fini avec un revêtement Teflon® noir mat cuit au four, qui est auto-lubrifiant et résiste aux rayures et à l'usure. La version mise à jour dispose de ressorts de verrouillage positifs en bas des deux côtés de la plaque de fond (maintient le chargeur en place sans l'anneau en caoutchouc), d'une botte en polymère au bas de la boîte (plus facile à retirer), et d'une fente de guidage et d'un crochet arrière plus grand à l'arrière de la boîte (assure un verrouillage correct).
629.9CHF0CHF 629.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Référence: 393000037 H-S PRECISION SHORT ACTION DETACHABLE MAGAZINE 308 10RD Ref Fabricant: AP307 Ajoute toute la commodité d'un chargeur à boîte détachable à ton Remington 700 BDL préféré. Le loquet à ressort à l'intérieur du pontet libère le chargeur à boîte, facilitant le chargement et le déchargement. Fabriqué en acier inoxydable durable et fini avec un revêtement Teflon® noir mat cuit au four, qui est auto-lubrifiant et résiste aux rayures et à l'usure. La version mise à jour dispose de ressorts de verrouillage positifs en bas des deux côtés de la plaque de fond (maintient le chargeur en place sans l'anneau en caoutchouc), d'une botte en polymère au bas de la boîte (plus facile à retirer), et d'une fente de guidage et d'un crochet arrière plus grand à l'arrière de la boîte (assure un verrouillage correct).
629.9CHF1CHF 629.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Add all the convenience of drop-free, box magazine to your favorite Remington 700 BDL. Spring-loaded finger latch inside the triggerguard drops the box magazine free, speeds loading and unloading. Made from durable stainless steel and finished with bake-on, matte, black Teflon® coating that's self-lubricating and resists scratches and wear. Updated version have positive locking springs on the bottom of both sides of the floor plate (holds the magazine box securely in place without the rubber o-ring), a polymer boot on bottom of box (easier to remove), and a guide slot and larger rear catch on back of box (ensures proper latch).
SPECS: Stainless steel, black, matte finish. 9.3 oz.(265 g) approximate wt. Fits H.S. Precision 2000 and Rem. 700 BDL long and short actions. Will fit Rem. ADL with modifications to stock. May require gunsmithing/fitting. Magazine Capacity – Five rounds with .223, .222 & .204, four rounds with standard calibers, ten rounds available for 308 and similar calibers, three or eight rounds with magnum calibers (8rd magazine holds 7 or 8, depending on cartridge).
Plus...
Ajoute toute la commodité d'un chargeur à boîte détachable à ton Remington 700 BDL préféré. Le loquet à ressort à l'intérieur du pontet libère le chargeur à boîte, facilitant le chargement et le déchargement. Fabriqué en acier inoxydable durable et fini avec un revêtement Teflon® noir mat cuit au four, qui est auto-lubrifiant et résiste aux rayures et à l'usure. La version mise à jour dispose de ressorts de verrouillage positifs en bas des deux côtés de la plaque de fond (maintient le chargeur en place sans l'anneau en caoutchouc), d'une botte en polymère au bas de la boîte (plus facile à retirer), et d'une fente de guidage et d'un crochet arrière plus grand à l'arrière de la boîte (assure un verrouillage correct).
SPECS : Acier inoxydable, noir, finition mate. Poids approximatif de 9,3 oz (265 g). S'adapte aux actions longues et courtes H.S. Precision 2000 et Rem. 700 BDL. Peut s'adapter au Rem. ADL avec des modifications au bois. Peut nécessiter un travail de gunsmithing/ajustement. Capacité du chargeur – Cinq cartouches avec .223, .222 & .204, quatre cartouches avec des calibres standards, dix cartouches disponibles pour 308 et calibres similaires, trois ou huit cartouches avec des calibres magnum (le chargeur de 8 cartouches contient 7 ou 8, selon la cartouche).
Plus...
Évaluations client de H-S PRECISION SHORT ACTION MAGAZINE 308
Nombre d'évaluations: 8
De brownells.com: 8
Note moyenne: 3.8
Better than I expected!(28.12.2013)
This was listed as a drop in kit. But on my Remington 700 bdl, this was not the case. I needed to do a good deal of inletting and relief work to seat this kit properly. No modifying of the kit itself was needed. I used my dremmel tool and slow removal of material until I had a sound fit. Once the main body was seated there were gaps around the edges. I will be using Brownells stainless steel bedding kit to fill these gaps and insure nothing will move about. This kit allows flawless feeding of ammo to battery, and is of better quality than I had anticipated.
Just what I was hoping it would be.(21.05.2014)
I purchased this to upgrade my Remington 700 ADL to a Hogue BDL Stock + the Detachable Magazine. First is that with this Hogue stock I had to do some minor filing and fitting. It does not drop in. It is worth the work and not too hard, if you take your time. It is a great fit and improvement over firing one round at a time. Parts quality is the best I've seen. If you are the patient type you will not be disappointed.
Complete garbage(14.11.2014)
I have a H-S precision stock and this bolts in great and that's it. The rest of the product fails in historic proportions. The bullets don't feed at all. The last round never comes out of the magazine cleanly ever! I am extremely disappointed in this product especially for how much it costs and the "reputation" H-S precision has....
Also if you are a precision shooter and think your hand loads will fit. Think again. I had to the shorten the overal length to get the round to fit in the magazine itself. Again I would NEVER RECOMMEND this to anyone.
Works perfectly(12.05.2015)
I have this system with 5- and 10-round H-S magazines, fitted into the H-S Precision stock that comes from Remington as part of their Model 5R Milspec. While the system is not drop-in, it is *almost* drop-in. The only conflict is the internal latch that holds onto the magazine. When you release the latch moves outward and this conflicts with the stock crosspiece. I got out a riffler file and made a slim diagonal channel in the soft crosspiece material (no neet to touch the aluminum chassis underneath) and in 10 minutes I had a perfect drop-in fit. On my Manners T5A the same fitment is required, plus a slight enlargement of the rearmost portion of the mag well. Manners will perform this themselves at no cost on a BDL-inlet stock if you ask them at time of purchase.
As to functionality, it is perfect. If your rounds don't fit this magazine then they don't fit any magazine. then they must not conform to 7.62 NATO specs. I have run several types of ammo plus handloads with an OALT of 2.793" and they fit fine. 145gr commercial ammo has a bunch of extra room. 175gr commercial match ammo not so much, but it fits.
Very good product (09.04.2016)
Was very easy to install. Took about 30 mins. Small file and a little time. Fits perfectly. Loads perfectly. Well worth the little time and money.
Box magazine conversion #1 upgrade !!(29.07.2013)
Generation 2 of this product is vastly superior to the original. Less noise, more positive lock, and polymer boot to prevent damage when dropped. Easy to install, no fitting necessary.
Requires Gunsmithing(30.09.2013)
This part required a gunsmith to install on a Remington PSS with the H-S precision stock. Had to opened up with a mill.
The mags will not retain and feed rounds reliably without being tuned. The lips are far too wide apart and are flat, as opposed to curved, which would feed better.
The AI variants are much better products and better quality as well.
Great looking product!(12.08.2015)
Did my homework and selected this product for my Rem 700 Sendero based on reviews. When I installed it my first problem was the front action screw now intruded into the action and prevented the bolt from closing. The second issue was the back of the magazine made contact with the lower back bridge of the action and therefore was difficult to install and wouldn't drop from the action when the release was pressed. I installed a .012 shim to correct the problem but then had a problem feeding the last round, (yep, all it takes it .012 to jack it up). I almost sent it back but decided to try removing .015 from the front action screw. The bolt can now close and after testing over three ten round mags I can say it feeds correctly. In defense of HS Precision I seem to always have weird problems when buying and installing stuff like this. I would give it five stars if instructions addressing how to resolve potential problems had been included. I expect it to work as advertised and will repost if I have any major failures. I like that it's a double stack mag and think it's the best looking of all the DBM's on the market.