Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz

Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

EGW
ADAPTER PLATE FOR SIG SAUER M17 DELTAPOINT PRO TO TRIJICON RMR

841370112135 296000707
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Trijicon RMR red dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount does not fit: Sig P320 RX Sig P320 X-Five (with Romeo1 cut) Sig M17 Military Surplus
79.9 79.9 1 CHF
N. prodotto: 296000707
EGW OPTIC READY ADAPTER PLATE FOR TRIJICON RMR FITS SIG M17 BLK
Parti Fabbricante: 49500 841370112135
79.9 CHF 8 CHF 79.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Sig Sauer Colore: Black Materiale: Alluminio Modello: M17, M18, P320 X-Five Legion, P320 X-Carry Numero di basi: 1 pezzo Tipo: Basi per adattatori

Caratteristiche

Adatto per: Sig Sauer Colore: Black Materiale: Alluminio Modello: P320 X-Carry,P320 X-Five Legion,M17,M18 Numero di basi: 1 pezzo Tipo: Basi per adattatori Peso della spedizione: 0.045kg Altezza di spedizione: 25mm Larghezza di spedizione: 76mm Lunghezza di spedizione: 152mm UPC : 841370112135

Dettagli dell'elemento

Made in Usa




Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Trijicon RMR red dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount does not fit: Sig P320 RX Sig P320 X-Five (with Romeo1 cut) Sig M17 Military Surplus