Gives Your AK The Adjustability & Convenience Of An M4 Stock
Aluminum receiver extension replaces the standard, fixed buttstock on your AK-47 to let you install an M4 collapsible stock on your rifle. Provides five locking positions; corresponding white index numbers are visible through the release pin access hole found on many buttstocks. Near-receiver sockets on each side of the extension accept quick-detach, push-button swivels for single-point sling attachment. An internal storage compartment is accessible by removing screw-on cap from the rear of the extension. Includes mounting hardware.
SPECS: Aluminum, hardcoat anodized, matte black finish. 8 (cm) overall length. Fits most AK-47/AKM/AKS rifles with stamped receivers, except the Yugo RPK and Iraqi Tabuk. Accepts Colt and other mil-spec collapsible buttstocks that fit a 1.14 dia. buffer tube. Kit includes stock extension, end cap, mounting bolts, nut, (3) dust plates, and installation instructions.
Plus...
Donne à ton AK la possibilité d'ajustement et la commodité d'une crosse M4
L'extension de récepteur en aluminium remplace la crosse fixe standard de ton AK-47 pour te permettre d'installer une crosse rétractable M4 sur ton fusil. Offre cinq positions de verrouillage ; les numéros d'index blancs correspondants sont visibles à travers le trou d'accès au goupillon de libération que l'on trouve sur de nombreuses crosses. Les sockets près du récepteur de chaque côté de l'extension acceptent des attaches rapides à bouton-poussoir pour le montage d'une sangle à point unique. Un compartiment de rangement interne est accessible en retirant le capuchon à vis à l'arrière de l'extension. Comprend le matériel de montage.
SPECS : Aluminium, anodisé dur, finition noire mate. Longueur totale de 8 (cm). S'adapte à la plupart des fusils AK-47/AKM/AKS avec récepteurs estampés, sauf le Yugo RPK et le Tabuk irakien. Accepte les crosse rétractables Colt et autres crosse mil-spec qui s'adaptent à un tube de buffer de 1,14 dia. Le kit comprend une extension de crosse, un capuchon de fin, des boulons de montage, un écrou, (3) plaques de protection et des instructions d'installation.
Plus...
Évaluations client de VLTOR WEAPON SYSTEMS AK-47 STOCK ADAPTER
Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 5
VLTOR simply makes great products(22.02.2010)
Extremely well made, solid, and super easy to install. One of the best upgrades I have ever been able to simply bolt onto a gun. With the newly adjusted LOP on an AK platform, coupled with the Ultimak rail system, I am able to fully utilize a stubby vertical foregrip without any compromise to easy mag changes or a good solid shooting stance.
AWESOME!(08.03.2010)
Quick, easy and SOLID install! Best part about it...IT'S METAL! None of this polymer junk that will break if you ever have to use the butt of your weapon instead.
AWESOME!(08.03.2010)
Quick, easy and SOLID installation and the best part about it... IT'S METAL! None of this polymer junk that will break if you need to use the butt of your weapon instead.
Drop in on Saiga 12(18.09.2010)
Excellent quality, perfect fit on my Saiga 12 shotgun. O-ring on rear cap seals storage area. Magpul MOE fits very well.
WASR 10/63(07.03.2011)
The most sturdy stock system available for an ak47 platform. Really improves feel of the rifle! Would recommend to anyone looking to get an ak to compete with the functionality of the ar15.
Absolutely Outstanding(24.06.2011)
Pleased with this product is an understatement! The hardest part of the install was getting the old stock off! Seriously well made, looks good, and looks like it will last a very long time. I used a Mag pul MOE stock. The rifle looks great. At first I thought I was spending too much money but not anymore. It's well worth the price.
Great Product(25.03.2012)
Just arrived and it took me about 5 minutes to put this on my Mac 90, perfect fit, it took me longer to take off the original stock, strong and looks great, beats a plastic one any day, I will buy more.
Excellent accessory addition to AK(31.08.2013)
Installed easily. Fit perfect, no play like that of a folding stock. Adjustable for pull length. When combined with a Magpul Butt Stock (MIL-SPEC) you made a new AMERICAN FURNITURE version of the AK.
Mak90(15.09.2013)
I put this on a Mak90 (stamped) it fit great easy install . I shoot allot have many AK's Norinco is a bit hard to find parts that work well do to the heavy receiver and berral but this product works well . I like how stought the butt stock is and allows for AR type stock which most of us are use to allows for close combat or distance unlike what was on their.
A must for every tactical rigged AK.(06.06.2015)
Already have one on my WASR-10(also has an eotech exps 3-4). Transition from clearing rooms to engaging longer range targets in seconds. This will be my second VLTOR AK buffer tube. This one is going on my Saiga 12.
Référence: 100003177 VLTOR WEAPON SYSTEMS AK-47 STOCK ADAPTER Ref Fabricant: RE-47 L'extension de récepteur en aluminium remplace la crosse fixe standard de ton AK-47 pour te permettre d'installer une crosse rétractable M4 sur ton fusil. Offre cinq positions de verrouillage ; les numéros d'index blancs correspondants sont visibles à travers le trou d'accès au goupillon de libération que l'on trouve sur de nombreuses crosses. Les sockets près du récepteur de chaque côté de l'extension acceptent des attaches rapides à bouton-poussoir pour le montage d'une sangle à point unique. Un compartiment de rangement interne est accessible en retirant le capuchon à vis à l'arrière de l'extension. Comprend le matériel de montage.
159.9CHF2CHF 159.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Transforme ton AK-47 avec l'adaptateur de crosse VLTOR. 🌟 Installe une crosse rétractable et profite de sa polyvalence et de son design en aluminium!
Gives Your AK The Adjustability & Convenience Of An M4 Stock
Aluminum receiver extension replaces the standard, fixed buttstock on your AK-47 to let you install an M4 collapsible stock on your rifle. Provides five locking positions; corresponding white index numbers are visible through the release pin access hole found on many buttstocks. Near-receiver sockets on each side of the extension accept quick-detach, push-button swivels for single-point sling attachment. An internal storage compartment is accessible by removing screw-on cap from the rear of the extension. Includes mounting hardware.
SPECS: Aluminum, hardcoat anodized, matte black finish. 8 (cm) overall length. Fits most AK-47/AKM/AKS rifles with stamped receivers, except the Yugo RPK and Iraqi Tabuk. Accepts Colt and other mil-spec collapsible buttstocks that fit a 1.14 dia. buffer tube. Kit includes stock extension, end cap, mounting bolts, nut, (3) dust plates, and installation instructions.
Plus...
Donne à ton AK la possibilité d'ajustement et la commodité d'une crosse M4
L'extension de récepteur en aluminium remplace la crosse fixe standard de ton AK-47 pour te permettre d'installer une crosse rétractable M4 sur ton fusil. Offre cinq positions de verrouillage ; les numéros d'index blancs correspondants sont visibles à travers le trou d'accès au goupillon de libération que l'on trouve sur de nombreuses crosses. Les sockets près du récepteur de chaque côté de l'extension acceptent des attaches rapides à bouton-poussoir pour le montage d'une sangle à point unique. Un compartiment de rangement interne est accessible en retirant le capuchon à vis à l'arrière de l'extension. Comprend le matériel de montage.
SPECS : Aluminium, anodisé dur, finition noire mate. Longueur totale de 8 (cm). S'adapte à la plupart des fusils AK-47/AKM/AKS avec récepteurs estampés, sauf le Yugo RPK et le Tabuk irakien. Accepte les crosse rétractables Colt et autres crosse mil-spec qui s'adaptent à un tube de buffer de 1,14 dia. Le kit comprend une extension de crosse, un capuchon de fin, des boulons de montage, un écrou, (3) plaques de protection et des instructions d'installation.
Plus...
Évaluations client de VLTOR WEAPON SYSTEMS AK-47 STOCK ADAPTER
Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 5
VLTOR simply makes great products(22.02.2010)
Extremely well made, solid, and super easy to install. One of the best upgrades I have ever been able to simply bolt onto a gun. With the newly adjusted LOP on an AK platform, coupled with the Ultimak rail system, I am able to fully utilize a stubby vertical foregrip without any compromise to easy mag changes or a good solid shooting stance.
AWESOME!(08.03.2010)
Quick, easy and SOLID install! Best part about it...IT'S METAL! None of this polymer junk that will break if you ever have to use the butt of your weapon instead.
AWESOME!(08.03.2010)
Quick, easy and SOLID installation and the best part about it... IT'S METAL! None of this polymer junk that will break if you need to use the butt of your weapon instead.
Drop in on Saiga 12(18.09.2010)
Excellent quality, perfect fit on my Saiga 12 shotgun. O-ring on rear cap seals storage area. Magpul MOE fits very well.
WASR 10/63(07.03.2011)
The most sturdy stock system available for an ak47 platform. Really improves feel of the rifle! Would recommend to anyone looking to get an ak to compete with the functionality of the ar15.
Absolutely Outstanding(24.06.2011)
Pleased with this product is an understatement! The hardest part of the install was getting the old stock off! Seriously well made, looks good, and looks like it will last a very long time. I used a Mag pul MOE stock. The rifle looks great. At first I thought I was spending too much money but not anymore. It's well worth the price.
Great Product(25.03.2012)
Just arrived and it took me about 5 minutes to put this on my Mac 90, perfect fit, it took me longer to take off the original stock, strong and looks great, beats a plastic one any day, I will buy more.
Excellent accessory addition to AK(31.08.2013)
Installed easily. Fit perfect, no play like that of a folding stock. Adjustable for pull length. When combined with a Magpul Butt Stock (MIL-SPEC) you made a new AMERICAN FURNITURE version of the AK.
Mak90(15.09.2013)
I put this on a Mak90 (stamped) it fit great easy install . I shoot allot have many AK's Norinco is a bit hard to find parts that work well do to the heavy receiver and berral but this product works well . I like how stought the butt stock is and allows for AR type stock which most of us are use to allows for close combat or distance unlike what was on their.
A must for every tactical rigged AK.(06.06.2015)
Already have one on my WASR-10(also has an eotech exps 3-4). Transition from clearing rooms to engaging longer range targets in seconds. This will be my second VLTOR AK buffer tube. This one is going on my Saiga 12.