There's no need to go with a pistol-caliber specific AR lower on your next pistol-caliber carbine build. With the Stern Defense AR-15 9mm Conversion Adapter you have the ability to utilize popular pistol magazines which you may already have a supply of. Stern Defense make two differ models of their Conversion Adapter, one which uses Glock® magazines, and one which uses either Smith & Wesson M&P or Sig 320/250 magazines. The Stern Defense AR-15 9mm Conversion Adapter is easily installed into any mil-spec AR-15 lower receiver within seconds and even incorporates a last-round bolt hold open feature. Each adapter is machined from aluminum and requires the use of a 9mm/.40 S&W barrel and a Glock-cut bolt. Made of aircraft grade aluminum Lightweight, ergonomic design Installs in seconds If you’re considering converting your AR-15 to a 9mm, give the Stern Defense Adapter a thought!
Plus...
Convertis facilement ton lower en 9mm
Il n'est pas nécessaire d'opter pour un lower AR spécifique au calibre de pistolet lors de votre prochaine construction de carabine à calibre de pistolet. Avec l'adaptateur de conversion AR-15 9mm de Stern Defense, vous avez la possibilité d'utiliser des chargeurs de pistolet populaires que vous avez peut-être déjà en stock. Stern Defense propose deux modèles différents de leur adaptateur de conversion, l'un qui utilise des chargeurs Glock® et l'autre qui utilise soit des chargeurs Smith & Wesson M&P, soit des chargeurs Sig 320/250. L'adaptateur de conversion AR-15 9mm de Stern Defense s'installe facilement dans n'importe quel lower receiver AR-15 conforme aux normes militaires en quelques secondes et intègre même une fonction de maintien de la dernière cartouche. Chaque adaptateur est usiné en aluminium et nécessite l'utilisation d'un canon 9mm/.40 S&W et d'un boulon découpé pour Glock. Fabriqué en aluminium de qualité aéronautique. Design léger et ergonomique. S'installe en quelques secondes. Si tu envisages de convertir ton AR-15 en 9mm, pense à l'adaptateur de Stern Defense !
Plus...
Évaluations client de STERN DEFENSE AR-15 9MM CONVERSION ADAPTER FOR S&W M&P/SIG 320 MAGAZINES
Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 4.7
Great product so far.(25.06.2018)
Product is well machined and well thought out. The bolt hold open design works great as opposed to some others. Magazine release feels natural for both strong and weak side support. The only mod required was removal of the integral feed ramp because the upper is a Taccom ULW upper that already has a barrel ramp. Removing the ramp was easily accomplished with an allen wrench. The customer service rep at Stern was very helpful with this. Specs are as follows:
Taccom ULW complete upper with ramp and bolt mod,
Taccom adjustable buffer system,
Spikes mil spec multi cal lower,
Geissele of some kind
Stern 9mm Adapter(26.06.2018)
I bought this produce so I wouldnât have to but a different lower receiver. I did call Stern because it would not let me cycle the bolt with the adapter fully seated. I had bought a Foxtrot Mike upper. Stern said that for $7.50 they would mill .035 off the bolt plus shipping both ways. It works like a charm now. Very impressed with the product and Sternâs costumer service.
Use those Glock mags for PCC.(30.06.2018)
Works great with my FM upper after the bolt mod. Bolt hold open does not work with the Magpul mags. Works perfectly with glock and ETS
Building a 9mm AR Carbine on a budget can quickly become an expensive endeavor if you buy unreliable parts. The AR-15 9mm Conversion Adapter for Glock® Magazines by STERN DEFENSE Is a reliable way to use Glock magazines in a Mil-spec lower. I use it for USPSA PCC division and Steel Challenge matches to keep the feel of an M-4 and for training. Iâve personally tried other methods and this system is far superior. The feed ramp angle on 9mm is critical for proper function and reliability, with the vast array of projectile profiles. So far Iâve had luck with multiple types of 9mm projectiles I.E. Winchester 124gr FMJ, 145gr RN Bayou, and 147gr FP/HP Berryâs. The last round Bolt hold open is somewhat unnecessary for PCC, however, is great to feel the weight transfer of the bolt carrier group and buffer and have it lock on the last round.
The only feature that I dislike is the magazine release is located at the bottom of the unit which is not a big deal if your state allows âstandard capacityâ magazines. However, Iâd like index the same magazine release in the same configuration of an AR series firearm, which would be difficult without permanently modifying the magazine. Overall a great product the moment you open the package you can see that a lot of thought went into its development and manufacturer.
Awesome(21.08.2018)
Been looking for a reliable 9mm conversion for almost a year and after tons of researches (forum and YT), I decided to bite the bullet and purchase Stern Defense.
I have to say this thing is amazing, I installed this to my Anderson lower and it fits perfectly no play and nothing. To be on the safe side, I purchased Stern Defense Upper (from their website) paired with their H3 Buffer.
Went to the range today and shot 1000rounds and ZERO hiccup! I ran all kinds of ammo (freedommunitions 115/147gn, Fiocchi 115gn, and Sellier&Bellot 115gn)
All and all, I'm very satisfied with the product!
Not perfect but close(06.10.2018)
This adapter is fantastic. The pistol I used fed reliably from all the Glock mags that fit in the well, including 40 S&W and 357 SIG magazines. Installation and adjustment is a matter of turning in one screw to set it, and then two more for standoffs so it doesn't move around when you seat a new magazine.
The only reason I took off a star is because the mag release is a little awkward to use, the thing was very sticky with an aftermarket 9mm drum magazine, and the bolt hold open was a little hyper aggressive and held the bolt open with one still in the magazine.
Référence: 100033498 STERN DEFENSE AR-15 9MM CONVERSION ADAPTER FOR S&W M&P/SIG 320 MAGAZINES Ref Fabricant: 001SDMAGADMP9AN850001176217 Il n'est pas nécessaire d'opter pour un lower AR spécifique au calibre de pistolet lors de votre prochaine construction de carabine à calibre de pistolet. Avec l'adaptateur de conversion AR-15 9mm de Stern Defense, vous avez la possibilité d'utiliser des chargeurs de pistolet populaires que vous avez peut-être déjà en stock. Stern Defense propose deux modèles différents de leur adaptateur de conversion, l'un qui utilise des chargeurs Glock® et l'autre qui utilise soit des chargeurs Smith & Wesson M&P, soit des chargeurs Sig 320/250. L'adaptateur de conversion AR-15 9mm de Stern Defense s'installe facilement dans n'importe quel lower receiver AR-15 conforme aux normes militaires en quelques secondes et intègre même une fonction de maintien de la dernière cartouche. Chaque adaptateur est usiné en aluminium et nécessite l'utilisation d'un canon 9mm/.40 S&W et d'un boulon découpé pour Glock. Fabriqué en aluminium de qualité aéronautique. Design léger et ergonomique. S'installe en quelques secondes. Si tu envisages de convertir ton AR-15 en 9mm, pense à l'adaptateur de Stern Defense !
314.9CHF0CHF 314.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
New
Référence: 100027483 STERN DEFENSE AR-15 9MM CONVERSION ADAPTER FOR GLOCK® MAGAZINES Ref Fabricant: 001-SD MAG-AD9-860141001508 Il n'est pas nécessaire d'opter pour un lower AR spécifique au calibre de pistolet lors de votre prochaine construction de carabine à calibre de pistolet. Avec l'adaptateur de conversion AR-15 9mm de Stern Defense, vous avez la possibilité d'utiliser des chargeurs de pistolet populaires que vous avez peut-être déjà en stock. Stern Defense propose deux modèles différents de leur adaptateur de conversion, l'un qui utilise des chargeurs Glock® et l'autre qui utilise soit des chargeurs Smith & Wesson M&P, soit des chargeurs Sig 320/250. L'adaptateur de conversion AR-15 9mm de Stern Defense s'installe facilement dans n'importe quel lower receiver AR-15 conforme aux normes militaires en quelques secondes et intègre même une fonction de maintien de la dernière cartouche. Chaque adaptateur est usiné en aluminium et nécessite l'utilisation d'un canon 9mm/.40 S&W et d'un boulon découpé pour Glock. Fabriqué en aluminium de qualité aéronautique. Design léger et ergonomique. S'installe en quelques secondes. Si tu envisages de convertir ton AR-15 en 9mm, pense à l'adaptateur de Stern Defense !
304.9CHF10CHF 304.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 100039214 STERN DEFENSE AR-15 9MM COVERSION ADAPTER FOR BERETTA 92 MAGAZINES Ref Fabricant: 001SDMAGADB929M860141001591 Il n'est pas nécessaire d'opter pour un lower AR spécifique au calibre de pistolet lors de votre prochaine construction de carabine à calibre de pistolet. Avec l'adaptateur de conversion AR-15 9mm de Stern Defense, vous avez la possibilité d'utiliser des chargeurs de pistolet populaires que vous avez peut-être déjà en stock. Stern Defense propose deux modèles différents de leur adaptateur de conversion, l'un qui utilise des chargeurs Glock® et l'autre qui utilise soit des chargeurs Smith & Wesson M&P, soit des chargeurs Sig 320/250. L'adaptateur de conversion AR-15 9mm de Stern Defense s'installe facilement dans n'importe quel lower receiver AR-15 conforme aux normes militaires en quelques secondes et intègre même une fonction de maintien de la dernière cartouche. Chaque adaptateur est usiné en aluminium et nécessite l'utilisation d'un canon 9mm/.40 S&W et d'un boulon découpé pour Glock. Fabriqué en aluminium de qualité aéronautique. Design léger et ergonomique. S'installe en quelques secondes. Si tu envisages de convertir ton AR-15 en 9mm, pense à l'adaptateur de Stern Defense !
314.9CHF16CHF 314.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
There's no need to go with a pistol-caliber specific AR lower on your next pistol-caliber carbine build. With the Stern Defense AR-15 9mm Conversion Adapter you have the ability to utilize popular pistol magazines which you may already have a supply of. Stern Defense make two differ models of their Conversion Adapter, one which uses Glock® magazines, and one which uses either Smith & Wesson M&P or Sig 320/250 magazines. The Stern Defense AR-15 9mm Conversion Adapter is easily installed into any mil-spec AR-15 lower receiver within seconds and even incorporates a last-round bolt hold open feature. Each adapter is machined from aluminum and requires the use of a 9mm/.40 S&W barrel and a Glock-cut bolt. Made of aircraft grade aluminum Lightweight, ergonomic design Installs in seconds If you’re considering converting your AR-15 to a 9mm, give the Stern Defense Adapter a thought!
Plus...
Convertis facilement ton lower en 9mm
Il n'est pas nécessaire d'opter pour un lower AR spécifique au calibre de pistolet lors de votre prochaine construction de carabine à calibre de pistolet. Avec l'adaptateur de conversion AR-15 9mm de Stern Defense, vous avez la possibilité d'utiliser des chargeurs de pistolet populaires que vous avez peut-être déjà en stock. Stern Defense propose deux modèles différents de leur adaptateur de conversion, l'un qui utilise des chargeurs Glock® et l'autre qui utilise soit des chargeurs Smith & Wesson M&P, soit des chargeurs Sig 320/250. L'adaptateur de conversion AR-15 9mm de Stern Defense s'installe facilement dans n'importe quel lower receiver AR-15 conforme aux normes militaires en quelques secondes et intègre même une fonction de maintien de la dernière cartouche. Chaque adaptateur est usiné en aluminium et nécessite l'utilisation d'un canon 9mm/.40 S&W et d'un boulon découpé pour Glock. Fabriqué en aluminium de qualité aéronautique. Design léger et ergonomique. S'installe en quelques secondes. Si tu envisages de convertir ton AR-15 en 9mm, pense à l'adaptateur de Stern Defense !
Plus...
Évaluations client de STERN DEFENSE AR-15 9MM CONVERSION ADAPTER FOR S&W M&P/SIG 320 MAGAZINES
Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 4.7
Great product so far.(25.06.2018)
Product is well machined and well thought out. The bolt hold open design works great as opposed to some others. Magazine release feels natural for both strong and weak side support. The only mod required was removal of the integral feed ramp because the upper is a Taccom ULW upper that already has a barrel ramp. Removing the ramp was easily accomplished with an allen wrench. The customer service rep at Stern was very helpful with this. Specs are as follows:
Taccom ULW complete upper with ramp and bolt mod,
Taccom adjustable buffer system,
Spikes mil spec multi cal lower,
Geissele of some kind
Stern 9mm Adapter(26.06.2018)
I bought this produce so I wouldnât have to but a different lower receiver. I did call Stern because it would not let me cycle the bolt with the adapter fully seated. I had bought a Foxtrot Mike upper. Stern said that for $7.50 they would mill .035 off the bolt plus shipping both ways. It works like a charm now. Very impressed with the product and Sternâs costumer service.
Use those Glock mags for PCC.(30.06.2018)
Works great with my FM upper after the bolt mod. Bolt hold open does not work with the Magpul mags. Works perfectly with glock and ETS
Building a 9mm AR Carbine on a budget can quickly become an expensive endeavor if you buy unreliable parts. The AR-15 9mm Conversion Adapter for Glock® Magazines by STERN DEFENSE Is a reliable way to use Glock magazines in a Mil-spec lower. I use it for USPSA PCC division and Steel Challenge matches to keep the feel of an M-4 and for training. Iâve personally tried other methods and this system is far superior. The feed ramp angle on 9mm is critical for proper function and reliability, with the vast array of projectile profiles. So far Iâve had luck with multiple types of 9mm projectiles I.E. Winchester 124gr FMJ, 145gr RN Bayou, and 147gr FP/HP Berryâs. The last round Bolt hold open is somewhat unnecessary for PCC, however, is great to feel the weight transfer of the bolt carrier group and buffer and have it lock on the last round.
The only feature that I dislike is the magazine release is located at the bottom of the unit which is not a big deal if your state allows âstandard capacityâ magazines. However, Iâd like index the same magazine release in the same configuration of an AR series firearm, which would be difficult without permanently modifying the magazine. Overall a great product the moment you open the package you can see that a lot of thought went into its development and manufacturer.
Awesome(21.08.2018)
Been looking for a reliable 9mm conversion for almost a year and after tons of researches (forum and YT), I decided to bite the bullet and purchase Stern Defense.
I have to say this thing is amazing, I installed this to my Anderson lower and it fits perfectly no play and nothing. To be on the safe side, I purchased Stern Defense Upper (from their website) paired with their H3 Buffer.
Went to the range today and shot 1000rounds and ZERO hiccup! I ran all kinds of ammo (freedommunitions 115/147gn, Fiocchi 115gn, and Sellier&Bellot 115gn)
All and all, I'm very satisfied with the product!
Not perfect but close(06.10.2018)
This adapter is fantastic. The pistol I used fed reliably from all the Glock mags that fit in the well, including 40 S&W and 357 SIG magazines. Installation and adjustment is a matter of turning in one screw to set it, and then two more for standoffs so it doesn't move around when you seat a new magazine.
The only reason I took off a star is because the mag release is a little awkward to use, the thing was very sticky with an aftermarket 9mm drum magazine, and the bolt hold open was a little hyper aggressive and held the bolt open with one still in the magazine.