Plastic segmented rods fit into AR-15 gas ports and help you find correct alignment between barrel and gas block. Rods come in 6-paks, and in different lengths and diameters to fit the different gas port specs used by various manufacturers. Segmented construction lets you break the rod off with standard cleaning rod, and high-visibility orange color makes it easy to verify both portions are out of the gas system and barrel. Available in .22 Cal for .223/5.56 and .30 Cal for all calibers from .223/5.56 up to .30 caliber. Includes instructions.
Plus...
Facilite l'Alignement Parfait du Bloc de Gaz
Les tiges segmentées en plastique s'insèrent dans les ports de gaz de l'AR-15 et t'aident à trouver le bon alignement entre le canon et le bloc de gaz. Les tiges sont vendues en paquets de 6, et en différentes longueurs et diamètres pour s'adapter aux différentes spécifications des ports de gaz utilisés par divers fabricants. La construction segmentée te permet de casser la tige avec une tige de nettoyage standard, et la couleur orange haute visibilité facilite la vérification que les deux parties sont hors du système de gaz et du canon. Disponibles en .22 Cal pour .223/5.56 et en .30 Cal pour tous les calibres allant de .223/5.56 jusqu'au calibre .30. Comprend des instructions.
Plus...
Évaluations client de UNIQUETEK GAS BLOCK ALIGNER 30 CALIBER
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 3
Gas Block Aligner Tool(27.09.2015)
Takes all the guess work out of gas block alignment, especially for a clamp on gas block. Watch the online video from the included instructions, it really is a brilliant tool. Very easy to use and works as advertised. This was my first gas block upgrade, I took my time and was very careful so it took me about 30 minutes. However, after having used this aligner I'm confident that I could do it again in literally minutes.
Didn't work.(09.01.2016)
Colt M4 LE6920. Even after cleaning out the carbon in the port, the smallest size alignment tool would not go in the port.
Worthless. Good idea, poor execution.
Great idea, didnât work(04.02.2018)
I followed the instructions provided in the video provided by brownells. It seemed like a great idea and I was aligning a fbs I thought it would work great. I found the correct pin which was the smallest, put it in the barrel, slipped the fbs over , flipped the assembly over and it worked. Got it aligned, but then when I tried to remove it the pin wouldnât drop back down! I loosened the fbs thinking it was jammed against the wall, nothing! No matter what I sit I would the pin would not drop! I eventually had to pull the fbs off the barrel breaking the plastic pin. Very upset I paid almost $10 for a one use piece of plastic that didnât even work! Maybe I did something wrong but I am not happy with this product!
Great tool - beats guessing(09.03.2018)
Did my first two AR's tonight using this gadget. One was a heavy/bull barrel and other was a standard .750. Both gas blocks were vintage with rails built in. Read the instructions, watched a couple videos on YouTube then got going. Cleaned out the barrel ports per instructions. Dropped in the little sticks which went without a hitch. I did discover one gas block was generously sized so I had to pick the best "middle" position. Both fell into place and blocks tightened. Both snapped off easily with a cleaning rod.
This is much cheaper than buying a bore scope and certainly much better than guessing by eye and hoping the holes are lined up. Highly recommend and will be buying more of these.
Référence: 100015041 UNIQUETEK GAS BLOCK ALIGNER 30 CALIBER Ref Fabricant: CT151130 Les tiges segmentées en plastique s'insèrent dans les ports de gaz de l'AR-15 et t'aident à trouver le bon alignement entre le canon et le bloc de gaz. Les tiges sont vendues en paquets de 6, et en différentes longueurs et diamètres pour s'adapter aux différentes spécifications des ports de gaz utilisés par divers fabricants. La construction segmentée te permet de casser la tige avec une tige de nettoyage standard, et la couleur orange haute visibilité facilite la vérification que les deux parties sont hors du système de gaz et du canon. Disponibles en .22 Cal pour .223/5.56 et en .30 Cal pour tous les calibres allant de .223/5.56 jusqu'au calibre .30. Comprend des instructions.
21.9CHF14CHF 21.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 100015040 UNIQUETEK GAS BLOCK ALIGNER 22 CALIBER Ref Fabricant: CT151122 Les tiges segmentées en plastique s'insèrent dans les ports de gaz de l'AR-15 et t'aident à trouver le bon alignement entre le canon et le bloc de gaz. Les tiges sont vendues en paquets de 6, et en différentes longueurs et diamètres pour s'adapter aux différentes spécifications des ports de gaz utilisés par divers fabricants. La construction segmentée te permet de casser la tige avec une tige de nettoyage standard, et la couleur orange haute visibilité facilite la vérification que les deux parties sont hors du système de gaz et du canon. Disponibles en .22 Cal pour .223/5.56 et en .30 Cal pour tous les calibres allant de .223/5.56 jusqu'au calibre .30. Comprend des instructions.
Plastic segmented rods fit into AR-15 gas ports and help you find correct alignment between barrel and gas block. Rods come in 6-paks, and in different lengths and diameters to fit the different gas port specs used by various manufacturers. Segmented construction lets you break the rod off with standard cleaning rod, and high-visibility orange color makes it easy to verify both portions are out of the gas system and barrel. Available in .22 Cal for .223/5.56 and .30 Cal for all calibers from .223/5.56 up to .30 caliber. Includes instructions.
Plus...
Facilite l'Alignement Parfait du Bloc de Gaz
Les tiges segmentées en plastique s'insèrent dans les ports de gaz de l'AR-15 et t'aident à trouver le bon alignement entre le canon et le bloc de gaz. Les tiges sont vendues en paquets de 6, et en différentes longueurs et diamètres pour s'adapter aux différentes spécifications des ports de gaz utilisés par divers fabricants. La construction segmentée te permet de casser la tige avec une tige de nettoyage standard, et la couleur orange haute visibilité facilite la vérification que les deux parties sont hors du système de gaz et du canon. Disponibles en .22 Cal pour .223/5.56 et en .30 Cal pour tous les calibres allant de .223/5.56 jusqu'au calibre .30. Comprend des instructions.
Plus...
Évaluations client de UNIQUETEK GAS BLOCK ALIGNER 30 CALIBER
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 3
Gas Block Aligner Tool(27.09.2015)
Takes all the guess work out of gas block alignment, especially for a clamp on gas block. Watch the online video from the included instructions, it really is a brilliant tool. Very easy to use and works as advertised. This was my first gas block upgrade, I took my time and was very careful so it took me about 30 minutes. However, after having used this aligner I'm confident that I could do it again in literally minutes.
Didn't work.(09.01.2016)
Colt M4 LE6920. Even after cleaning out the carbon in the port, the smallest size alignment tool would not go in the port.
Worthless. Good idea, poor execution.
Great idea, didnât work(04.02.2018)
I followed the instructions provided in the video provided by brownells. It seemed like a great idea and I was aligning a fbs I thought it would work great. I found the correct pin which was the smallest, put it in the barrel, slipped the fbs over , flipped the assembly over and it worked. Got it aligned, but then when I tried to remove it the pin wouldnât drop back down! I loosened the fbs thinking it was jammed against the wall, nothing! No matter what I sit I would the pin would not drop! I eventually had to pull the fbs off the barrel breaking the plastic pin. Very upset I paid almost $10 for a one use piece of plastic that didnât even work! Maybe I did something wrong but I am not happy with this product!
Great tool - beats guessing(09.03.2018)
Did my first two AR's tonight using this gadget. One was a heavy/bull barrel and other was a standard .750. Both gas blocks were vintage with rails built in. Read the instructions, watched a couple videos on YouTube then got going. Cleaned out the barrel ports per instructions. Dropped in the little sticks which went without a hitch. I did discover one gas block was generously sized so I had to pick the best "middle" position. Both fell into place and blocks tightened. Both snapped off easily with a cleaning rod.
This is much cheaper than buying a bore scope and certainly much better than guessing by eye and hoping the holes are lined up. Highly recommend and will be buying more of these.