Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

KE ARMS
AR-15 KP-15 COMPLETE LOWER RECEIVERS AMBIDEXTROUS POLYMER

100037290
Ambidextrous Controls in an Affordable Package
What makes this lower different than its counterparts? The answer is simple… the KE Arms KP-15 is a monolithic polymer AR-15 ambidextrous lower receiver made from injection molded, 30% glass-filled nylon. Its unique design incorporates the buffer tube, pistol grip, trigger and a 13-inch (LOP) buttstock into the receiver as integral components. The result is an affordably priced, lightweight lower receiver.  The KE Arms KP-15 ambidextrous lower receiver features a lower parts kit including a KE Arms SLT-1 trigger (4.5-pound pull, sear link technology) and ambi selector. The take down and pivot pins have built-in detents, which increases durability by eliminating the spring and detent holes. The lower uses a carbine buffer and spring. The buffer detent (should you choose to use it) is held in place with a 5/64” roll pin. The hammer pin area is wider for durability; standard AR-15 hammer pins can still be used, though the KE Arms longer hammer pin is recommended for customers preferring a flush pin for aesthetic reasons. The safety selector spring and detent have been designed to load from the top, then the selector is slid over them. (Standard selectors can work but removing them can be particularly difficult. KE Arms recommends the use of their designated mil-spec selector or ambi selector to make removal easier. Follow the manufacturer’s assembly guide for further instructions.) Weight: 1.698 lbs.  Compatible with all Mil-Spec fire control groups Compatible with cassette style match triggers Flared magwell Available in black and flat dark earth MLOK slots at rear of stock for sling attachment Pre-drilled in front for QD socket inserts Uses a standard bolt catch. Cannot accept the PDQ lever. The PDQ lever is exclusive to the WWSD complete rifle. Do NOT use anything other than standard carbine buffers and round springs or the JP SCSS in the KP-15. WARNING!: This item is legally classified as a receiver. You Must be 21 years old to purchase this item and a resident of the same state your transferring dealer is licensed in. The KE Arms KP-15 is compatible with standard AR-15 uppers in calibers including .223/5.56mm NATO, .300 Blackout, 6.5mm Grendel and 6.8mm SPC. The lower receiver is also compatible with 9mm blowback systems, when used with a minimum buffer weight of 5.4oz (carbine). Failure to use a minimum buffer weight of 5.4oz can damage the lower. CERAKOTE: If you intend to Cerakote your KP-15 the manufacturer recommends the bake should be done at low temperatures (<190 Degrees F) and with an upper in place to prevent warping.


569.9 569.9 1 CHF
N. prodotto: 100037290
KE ARMS KP-15 COMPLETE LOWER RECEIVER AMBIDEXTROUS POLYMER FDE
Parti Fabbricante: 1-61-01-009
569.9 CHF 0 CHF 569.90 *
Avvisa quando diventa disponibile
Esaurito. Nessuna data di consegna nota.
Caratteristiche: Adatto per: AR-15 Cartuccia: 5.56 mm NAa Colore: Flat Dark Earth Finitura: Anodizzaa Tipo: Complete

Esportazione Limitata

Questo prodotto è disponibile solo per la vendita in Svizzera

Restrizioni

  • Permesso Acquisto Armi Richiesto

Caratteristiche

Adatto per: AR-15 Cartuccia: 5.56 mm NAa Colore: Flat Dark Earth Finitura: Anodizzaa Tipo: Complete Peso della spedizione: 0.68kg Altezza di spedizione: 51mm Larghezza di spedizione: 229mm Lunghezza di spedizione: 533mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A509.b




Scopri il ricevitore inferiore completo AR-15 KP-15 in Flat Dark Earth 🌍. Design ambidestro e finitura anodizzata per prestazioni elevate.

Ambidextrous Controls in an Affordable Package
What makes this lower different than its counterparts? The answer is simple… the KE Arms KP-15 is a monolithic polymer AR-15 ambidextrous lower receiver made from injection molded, 30% glass-filled nylon. Its unique design incorporates the buffer tube, pistol grip, trigger and a 13-inch (LOP) buttstock into the receiver as integral components. The result is an affordably priced, lightweight lower receiver.  The KE Arms KP-15 ambidextrous lower receiver features a lower parts kit including a KE Arms SLT-1 trigger (4.5-pound pull, sear link technology) and ambi selector. The take down and pivot pins have built-in detents, which increases durability by eliminating the spring and detent holes. The lower uses a carbine buffer and spring. The buffer detent (should you choose to use it) is held in place with a 5/64” roll pin. The hammer pin area is wider for durability; standard AR-15 hammer pins can still be used, though the KE Arms longer hammer pin is recommended for customers preferring a flush pin for aesthetic reasons. The safety selector spring and detent have been designed to load from the top, then the selector is slid over them. (Standard selectors can work but removing them can be particularly difficult. KE Arms recommends the use of their designated mil-spec selector or ambi selector to make removal easier. Follow the manufacturer’s assembly guide for further instructions.) Weight: 1.698 lbs.  Compatible with all Mil-Spec fire control groups Compatible with cassette style match triggers Flared magwell Available in black and flat dark earth MLOK slots at rear of stock for sling attachment Pre-drilled in front for QD socket inserts Uses a standard bolt catch. Cannot accept the PDQ lever. The PDQ lever is exclusive to the WWSD complete rifle. Do NOT use anything other than standard carbine buffers and round springs or the JP SCSS in the KP-15. WARNING!: This item is legally classified as a receiver. You Must be 21 years old to purchase this item and a resident of the same state your transferring dealer is licensed in. The KE Arms KP-15 is compatible with standard AR-15 uppers in calibers including .223/5.56mm NATO, .300 Blackout, 6.5mm Grendel and 6.8mm SPC. The lower receiver is also compatible with 9mm blowback systems, when used with a minimum buffer weight of 5.4oz (carbine). Failure to use a minimum buffer weight of 5.4oz can damage the lower. CERAKOTE: If you intend to Cerakote your KP-15 the manufacturer recommends the bake should be done at low temperatures (<190 Degrees F) and with an upper in place to prevent warping.


 
In magazzino
CHF 49.90 CHF 49.90 - CHF 89.90
4.3
In magazzino
CHF 94.90 CHF 51.19 - CHF 144.90
 
5
Riordinato
CHF 39.90
5
In magazzino
CHF 189.90 CHF 189.90 - CHF 204.90
Torna all'inizio