Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 399 CHF

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

Z-M WEAPONS
AR-15/M16 ACCU-WEDGE

993150100

Instantly Tightens Loose Upper & Lower Receivers

Helps promote better accuracy by making the upper and lower receiver fit tighter. Open upper receiver; drop this long-wearing, rubber wedge into the rear of the lower, behind the push pin. Absolutely no modifications required.

SPECS: High-density, thermo-plastic rubber, ½" (12.5mm) long.

Plus...

Resserre instantanément les récepteurs supérieurs et inférieurs lâches

Aide à améliorer la précision en rendant l'ajustement entre le récepteur supérieur et inférieur plus serré. Ouvre le récepteur supérieur ; fais tomber ce coin en caoutchouc durable à l'arrière du récepteur inférieur, derrière la goupille de poussée. Aucune modification n'est requise.

SPECS : Caoutchouc thermoplastique haute densité, ½" (12,5 mm) de long.

Plus...

Évaluations client de Z-M WEAPONS ACCU-WEDGE

Nombre d'évaluations: 17
De brownells.com: 17
Note moyenne: 4

Really tightens things up! (14.09.2009)

Makes upper and lower assemblies extremely snug fitting. Extra pressure is needed to close the take down pin. I wouldn't try "snapping" the upper group to facilitate mating the assemblies. The wedge would appear to decrease the rate of wear caused by pivot and take down pins jarring their receiver hole during extended shooting sessions. Trimming is NOT recommended.

No brainer-- get it!!! (31.10.2009)

Why are you wasting time reading this review? Just get it!!! It's about the only way you're going to tighten that upper down, and at [$], why argue? It works way better than the JP tensioner that costs 7 times more. If it doesn't tighten enough for your taste, all you have to do is put a spacer underneath it, and you're back in business.

DOES NOT WORK WITH RRA and S&W AR15 (19.12.2009)

It was questionable when I ordered the wedge if it would work with my Rock River Arms Elite Comp. I thought maybe it would fit in my Smith and Wesson M&P 15 but that's not the case as well. Don't order this brand of Accuwedge if you own one of the two ARs I mentioned.

Accu Wedge will not work on RRA ARs (06.02.2010)

I purchased an Accu Wedge to use on my RRA AR15 that has a slight play between upper and lower. When Accu Wedge is installed, it obstructs the closing of the upper and lower. I finally used a razor blade to trim bottom of wedge so it would fit. With almost 90% of base cut away, it finally allowed a tight fit but this wedge is not universal. It may work on other brands fine.

Accu-Wedge (22.05.2010)

I have been using an ACCU-Wedge in my COLT HBAR II competition carbine for twelve years. I have used in on military ranges, competition ranges and even in a hunting environment. It works perfectly in my Colt HBAR II and in government issue M-4/M-16s, can't comment on X brands as I have no experience with them. When the ACCU-Wedge was first offered, Colt pretty well owned the AR-15 market, so obviously, that's what it was designed for. I don't quite understand complaints where buyer's and users give lower ratings because they had to trim or make adjustments. By having to do so, you now can now easily (and best of all, cheaply) fall into the custom category, instead of the simpleton's world of plugging in something and expecting it to work perfectly. What a simple adjustment to have to make for an inexpensive improvement. By the way, the AR-15/M-16 series weapons are much like the M1911/A1 pistols. Gap and space are normal between upper and lower receivers and work perfectly well as designed. This $5.00 part can take that irritating (but harmless) play out without any harmful modification and makes a best-of-both worlds pleaser, that even an idiot without tools can install/de-install. I highly recommend it. I had one in my government issue M-4 while deployed to Iraq in 04-05 where it functioned flawlessly and with much use. When I returned home, I simply took it out and threw it away. Buy one, trim it if you must, use it, you'll love it.

Good product at a good price (23.09.2010)

I custom built my AR with a DS lower and generic upper I bought at a gun show, there was some standard play in between each so I tried out this product. It is easy to install, and solved the problem. I can see how some reciever combos might not work with this wedge, but all you need to do is razor blade some slack off, welcome to the world of gunsmithing.

accu wedge (04.01.2011)

the accu wedge dropped in to my DPMS perfect with no mods, nice and snug now no slop at all

IT DOES MAKE A DIF. (07.08.2011)

M-2- MIKE . IT DOES CHANGE THE SPOT UR SCOPES ON.PLAY BETWEEN UPPER AND LOWER. PUT A BORE SIGHT ON UR AR THEN MOVE THE PLAY SEE WHAT HAPPINS.THIS LITTLE BABY STOPS THAT CHANGE THAT CAN HAPPIN WITH TOO MUCH PLAY.LONG RANGE 1/8 CAN TURN INTO INCHES.IM GETTING 2 MORE.LOL

Installed in a Colt LE carbine (25.08.2011)

Fit perfect, installed in a new rifle but I have others that have loosened up and these always work! No trimming needed for me and it dropped rigfht in!

Perfect fit in my Bushmaster (24.01.2012)

My Bushmaster wasn't very loose to start with, but I figured for [$], why not try it. Dropped right in and fit perfect. Upper is now rock solid and rattle free.

Save your money (01.03.2012)

Wouldn't fit my DPMS without trimming. No difference in tightness between upper and lower.

Works Well As A Buffer.. (03.04.2014)

The polymer Accu-Wedge does not tighten receivers "rock solid" as some proclaim. The receivers will twist side to side according to pin fitment. What the Accu-Wedge does is act as a shock absorber or buffer. Without it the parts slam into each other and wear faster.
I've used many receiver combinations and the wedge has always fit although sometimes closing the receivers requires a good grip. Excess force should not be applied to the upper receiver overhang for the charge handle. The wedge will eventually settle in making closing the receivers easier.
The Accu-Wedge is recommended however I use other means to tighten receivers "rock solid."

Lots of trimming for Rock River lower (15.08.2014)

So this will require a lot of trimming in order to fit a RR lower. I shaved the bottom plug by 75% of its original height, I also had to chop the lip a little as well. Now that's not too big a deal because the play between my Yankee Hill upper and the lower is 99% gone, 100% no rattle. Just be sure to use a nice, small box cutter.. I used my Cold Steel XL Espada.. that was tricky.

Not for M&P 15 (08.02.2017)

Not enough room under or in back of the TDP on a S&W M&P 15. Trimming this thing was a chore, like trying to hold a piece of jello and tough to get a smooth cut. Had the base down to about 1/8" thick and about 1/8" off the wedge and still couldn't get the rifle closed enough to pin it. While I might recommend this to someone based on its good concept, it just doesn't work with this particular model AR.

Works great (28.07.2017)

My Colt SBR lower had a lot of slop in it. To much.....

I purchased one of these, trimmed it to fit and not it doesn't rattle anymore.

P.S. Slop between lower and upper has nothing to do with accuracy. Only shooter confidence.

For me it was annoying to have that much slop.

I WAS annoying.

It took the wibble out of my wobble (26.11.2017)

I just bought a new AR15 and the upper to lower fit was not satisfactory. However because it did not pose a safety problem I looked to Brownell's for the fix and found it when a friend recommended the AccuWedge. I installed it and found it needed a bit of trimming to allow the halves to fit. Dremel to the rescue. 1 minute's work and the wedge fit perfectly. No more wobble and loose fit. Thanks Brownell's.

Get a razorblade ready (02.02.2018)

First, understand that Browne!ls is great with which to do business; I use them a lot. But not all products they sell have that stellar reputation.

I installed the wedge on a S&W M&P 15 TS, and maybe tolerances are tighter. But I ended up cutting away about 60% of it before I could get the pin to lock the upper. Instructions say "squeeze" the upper down to lock. More like use a vise, which I certainly wasn't going to do. So I went to whittling.

Does it stop wobble? Yes.

Is it worth the price? Maybe not, especially if you have to whittle it down to almost nothing.

Got a loose fit on your AR? Might help.

Will I buy another? Probably not. For many years I didn't use one, and never missed it.

If the round base were MUCH thinner it would probably be a drop in.

Maybe buy a couple of school erasers for 50 cents and make your own.

I give it 3 stars.

Lire 17 plus d'avis sur brownells.com

26.9 26.9 1 CHF

Référence: 993150100
Z-M WEAPONS ACCU-WEDGE
Ref Fabricant: AW400 Aide à améliorer la précision en rendant l'ajustement entre le récepteur supérieur et inférieur plus serré. Ouvre le récepteur supérieur ; fais tomber ce coin en caoutchouc durable à l'arrière du récepteur inférieur, derrière la goupille de poussée. Aucune modification n'est requise.

26.9 CHF 744 CHF 26.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Manufacture: AR-15

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Améliore la précision en rendant l'ajustement entre le récepteur supérieur et inférieur plus serré.
Facile à installer : glisse simplement la cale en caoutchouc durable à l'arrière du récepteur inférieur.
Fabriqué en caoutchouc thermoplastique haute densité, mesurant ½" (12,5 mm).

Caractéristiques

Manufacture: AR-15 Poids du colis: 0.005kg Largeur d'expédition: 57mm Longueur d'expédition: 89mm

Détails de l'article

Fabriqué au USA

Améliore la précision de votre AR-15 avec l'ACCU-WEDGE Z-M WEAPONS. 🔧 Ajustement parfait sans modification requise!

Instantly Tightens Loose Upper & Lower Receivers

SPECS: High-density, thermo-plastic rubber, ½" (12.5mm) long.

Plus...

Resserre instantanément les récepteurs supérieurs et inférieurs lâches

SPECS : Caoutchouc thermoplastique haute densité, ½" (12,5 mm) de long.

Plus...

Évaluations client de Z-M WEAPONS ACCU-WEDGE

Nombre d'évaluations: 17
De brownells.com: 17
Note moyenne: 4

Really tightens things up! (14.09.2009)

No brainer-- get it!!! (31.10.2009)

DOES NOT WORK WITH RRA and S&W AR15 (19.12.2009)

Accu Wedge will not work on RRA ARs (06.02.2010)

Accu-Wedge (22.05.2010)

Good product at a good price (23.09.2010)

accu wedge (04.01.2011)

the accu wedge dropped in to my DPMS perfect with no mods, nice and snug now no slop at all

IT DOES MAKE A DIF. (07.08.2011)

Installed in a Colt LE carbine (25.08.2011)

Fit perfect, installed in a new rifle but I have others that have loosened up and these always work! No trimming needed for me and it dropped rigfht in!

Perfect fit in my Bushmaster (24.01.2012)

My Bushmaster wasn't very loose to start with, but I figured for [$], why not try it. Dropped right in and fit perfect. Upper is now rock solid and rattle free.

Save your money (01.03.2012)

Wouldn't fit my DPMS without trimming. No difference in tightness between upper and lower.

Works Well As A Buffer.. (03.04.2014)

Lots of trimming for Rock River lower (15.08.2014)

Not for M&P 15 (08.02.2017)

Works great (28.07.2017)

It took the wibble out of my wobble (26.11.2017)

Get a razorblade ready (02.02.2018)

Lire 17 plus d'avis sur brownells.com

Poursuivre vos achats
Equivalents

BROWNELLS

BROWNELLS ACCU-WEDGE
AR-15/M16 ACCU-WEDGE

Accu-Wedges

Récommandé

CHF 19.90

Éliminez facilement les dépôts de carbone avec le C4 Carbon Remover 🌿. Formule biodégradable, efficace sur tous types de pièces. Commandez maintenant !

BORE TECH

BORE TECH 4 OZ. C4 CARBON REMOVER
C4 CARBON REMOVER

Solvants

Récommandé

CHF 36.90 CHF 36.90 - CHF 79.90

Simplifiez le nettoyage de votre AR-15 avec le kit Sinclair. 🛠️ Accédez facilement à la culasse et profitez d'une durabilité exceptionnelle!

SINCLAIR INTERNATIONAL

SINCLAIR INTERNATIONAL CLEANING LINK FOR AR-15
CLEANING LINK FOR AR-15

Outils de Nettoyage

4.9

En stock

CHF 22.90

SCALARWORKS

SCALARWORKS AIMPOINT MICRO 1.57" LEAP/01 QD MOUNT BLACK
AIMPOINT MICRO LEAP MOUNT

Matériel Montage

Récommandé

CHF 264.90

COLT

COLT ACCU-WEDGE
ACCU-WEDGE

Accu-Wedges

Récommandé

CHF 25.90

COLT

COLT ACCU-WEDGE
ACCU-WEDGE

Accu-Wedges

Récommandé

CHF 25.90

BROWNELLS

BROWNELLS ACCU-WEDGE
AR-15/M16 ACCU-WEDGE

Accu-Wedges

Récommandé

CHF 19.90

Z-M WEAPONS
AR-15/M16 ACCU-WEDGE

Évaluations client de Z-M WEAPONS ACCU-WEDGE

Points forts

Caractéristiques

Détails de l'article

Évaluations client de Z-M WEAPONS ACCU-WEDGE

Se connecter

Méthodes de paiement sécurisées

Associations professionnelles

Bienvenue !

Z-M WEAPONS AR-15/M16 ACCU-WEDGE

Évaluations client de Z-M WEAPONS ACCU-WEDGE

Points forts

Caractéristiques

Détails de l'article

Évaluations client de Z-M WEAPONS ACCU-WEDGE

Se connecter

Méthodes de paiement sécurisées

Associations professionnelles

Bienvenue !

Z-M WEAPONS
AR-15/M16 ACCU-WEDGE