BOONIE PACKER PRODUCTS
AR-15/M16 BETTER-MAG S&W M&P 15-22 MAGAZINE CONVERSION ADAPTER

100012169

Lets You Use S&W M&P15-22 Mags With Your CMMG .22 Conversion

Easy-to-install adapter converts the reliable, easy-to-load Smith & Wesson M&P15-22 magazine for use in an AR-15 fitted with a dedicated .22 LR upper or a CMMG conversion unit. Unique design has an independent bolt catch that locks the bolt back on the last shot and keeps it there when the magazine is removed, just like on a standard centerfire AR-15. This allows easier reloads and provides a visual indicator that the gun is empty after the last round is fired. Will not fit DPMS, Chiappa, and Tactical Solutions units.

SPECS: 6061 aluminum body, natural finish. 1018 steel bolt catch, case-hardened.

Altro...

Ti consente di utilizzare i caricatori S&W M&P15-22 con la tua conversione CMMG .22

Adattatore facile da installare che converte il caricatore affidabile e facile da caricare Smith & Wesson M&P15-22 per l'uso in un AR-15 dotato di un upper dedicato .22 LR o di un'unità di conversione CMMG. Il design unico ha un fermo del percussore indipendente che blocca il percussore indietro all'ultimo colpo e lo mantiene in posizione quando il caricatore viene rimosso, proprio come su un AR-15 standard a fuoco centrale. Questo consente ricariche più facili e fornisce un indicatore visivo che l'arma è vuota dopo che l'ultimo colpo è stato sparato. Non si adatta a unità DPMS, Chiappa e Tactical Solutions.

SPECIFICHE: corpo in alluminio 6061, finitura naturale. 1018 acciaio per il fermo del percussore, indurito a caldo.

Altro...

Punteggi dei clienti per BOONIE PACKER PRODUCTS BETTER-MAG S&W .22 MAG ADAPTER

Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 3.8

Buy It (18.08.2013)

I replaced my other Bolt Hold Open device and magazines that go with my rimfire conversion with this Boonie Packer adapter and S&W magazines. Works much better and the magazines are much easier to load. I'm having so much fun I may have to build a dedicated .22 rimfire upper.

GREAT product for my dedicated .22 upper (04.09.2014)

Have an AR-15 with a dedicated CMMG .22LR upper that was VERY unreliable (usally 2-3 failures to feed/jams per magazine) with all types of ammo and after several 100 rounds to break it in.

Shot yesterday 150 rounds with the Better-Mag and S&W magazines and it ran GREAT!

I did have some issues (4/6) getting the first round to chamber by using the bolt release. Pulling and releasing the charging handle would then get it to load (one time I had to do this twice and then push the bolt with my thumb).

Also, it seemed like I could only load 24 rounds (may need to let the springs settle in).

Once it was loaded, it ran like a top with absolutely no stoppages. Much more reliable than using the Black Dog mags.

Bolt hold back works great.

Easier to load since you can pull the knobs to compress the spring.

This is a great product, and allows the S&W mags which do seem better (more reliable, easier to load).

Super happy. Will never go back to running without the Better-mag.

Near perfect (07.02.2017)

Works excellent. I have a CMMG conversion kit. The problem with the cmmg is the magazines. This conversion to M&P15-22 Kit does the job very well. Ran 1000 rounds so far, and almost flawless. The last-round-hold-open does work most of the time. I had a few times where it didn't, but no biggie. And sometimes after I first reassemble my rifle, it doesn't wanna work at first, but after the first mag, it will hold open just fine.

My only real complaint was how sharp all the edges are. They are FN sharp. I will be filing them all down shortly, but it's something that should have been done at the factory.

It's not the easiest thing to convert back and forth, as I'm afraid of losing the tiny bolt catch piece. Originally I was gonna switch back and forth between the CMMG's and 15-22's. But this thing works so well, it's staying put.

Well worth the money. It just works. If I get another cmmg conversion kit, I'm definitely gonna order another "better mag" mag adapter.

JP Enterprises (08.02.2018)

I bought this to go with JP Enterprises barrel and bolt. But in order to get it to fit I had to grind quite a bit of material off the right side and the bolt catch wont work. However it does feed from 15-22 magazines flawlessly so it was still worth it.

Useless (28.04.2018)

This magazine adapter did not work very well for me. I bought it because i wanted to get the LRBHO working with my CMMG 22LR conversion kit, but it did not work as planned. The adapter does not lock into the magazine catch or anywhere else and is perpetually sliding around. If you try to operate the bolt catch without a magazine, the whole adapter will slide down and stop working, the small bolt catch adapter may even fall out. Magazines fit very loosely and have a lot of play in all directions. The small bolt catch adapter does not interface with the magazine adapter very well and gets hung up constantly. You will have a hard time trying to release the bolt with an empty magazine in. This adapter is useless to me. Maybe it would be better if they stayed with the old design that was longer in the body to presumably locked into the mag catch. Also the small Bolt Catch adapter is not coated or stainless, and will start to rust very quickly if not kept well lubricated after each and every time you remove or install the adapter. For me its back to the CMMG magazines that work great aside from no real LRBHO.

Leggi più recensioni su brownells.com

69.9 69.9 1 CHF

Sale

N. prodotto: 100012169
BOONIE PACKER PRODUCTS BETTER-MAG S&W .22 MAG ADAPTER
Parti Fabbricante: BMA II Adattatore facile da installare che converte il caricatore affidabile e facile da caricare Smith & Wesson M&P15-22 per l'uso in un AR-15 dotato di un upper dedicato .22 LR o di un'unità di conversione CMMG. Il design unico ha un fermo del percussore indipendente che blocca il percussore indietro all'ultimo colpo e lo mantiene in posizione quando il caricatore viene rimosso, proprio come su un AR-15 standard a fuoco centrale. Questo consente ricariche più facili e fornisce un indicatore visivo che l'arma è vuota dopo che l'ultimo colpo è stato sparato. Non si adatta a unità DPMS, Chiappa e Tactical Solutions.

69.9 CHF 23 CHF 69.90 * CHF 99.90

Tempi di consegna circa 2-4 giorni dal magazzino locale.

Caratteristiche: Adatto per: Smith & Wesson

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Adattatore per convertire il magazine Smith & Wesson M&P15-22 per l'uso in un AR-15 con upper dedicato .22 LR.
Design con catch del percussore indipendente che mantiene il percussore bloccato all'ultimo colpo.
Realizzato in alluminio 6061 con catch in acciaio 1018, non compatibile con unità DPMS, Chiappa e Tactical Solutions.

Caratteristiche

Adatto per: Smith & Wesson Peso della spedizione: 0.029kg Altezza di spedizione: 23mm Larghezza di spedizione: 117mm Lunghezza di spedizione: 140mm