Adds Extra Elevation For Sights & Other Accessories
Add-on riser rail gives an additional ½" of elevation or offset sometimes needed to mount a red dot sight, light, laser, or other essential accessory. Clamps securely to any MIL-STD 1913 Picatinny rail and provides three Picatinny cross-slots. Steel crossbolt and oversized, hex-head slotted thumbscrew enable fast, easy installation and removal, with or without tools.
Aggiunge Elevazione Extra Per Mirini & Altri Accessori
Il rialzo aggiuntivo offre un ulteriore ½" di elevazione o offset a volte necessario per montare un mirino red dot, luce, laser o altro accessorio essenziale. Si fissa saldamente a qualsiasi rail Picatinny MIL-STD 1913 e offre tre slot incrociati Picatinny. Il crossbolt in acciaio e il dado a testa esagonale di grandi dimensioni con fessura consentono un'installazione e rimozione rapide e facili, con o senza attrezzi.
SPECS: Rail – alluminio 6061 T6, anodizzato di colore nero. Crossbolt/Thumbscrew – acciaio 4140, finitura ossidiana nera. 13⁄8" (3.5cm) di lunghezza, 1½" (3.8cm) di larghezza. Fornisce ½" (12.7mm) di elevazione aggiuntiva. Peso di 1.4 oz. (38g).
Altro...
Punteggi dei clienti per BROWNELLS 1/2" MINI RISER MOUNT
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4.5
44 CARBINE BASE MOUNT(09.02.2011)
I BOUGHT A ONE INCH HIGH MICRO MOUNT FOR THE 44 CARBINE THAT I HAVE. ITS JUST TOO HIGH. I MEASURED THIS HALF INCH HIGH RISER AND IT WAS PERFECT.
Superb Quality!(06.08.2011)
Used this to mount a Sig STS-081 red dot sight to my S&W 15/22 rifle. Worked perfect! 1/2" height of the mount, lined it right up with the sights, which are now the back-up sights. Thanks Brownells!
Buy Brownells not Yankee Hill(20.02.2012)
Bought the Yankee Hill and it wobbles on my AR rail. Tried it on every other rail I have and it wobbled on all of them. Bought Brownells and it clamps on tighter than a fishes butt. The bolt is large and sticks out a bit more than I would prefer and it is heavy, but obviously well constructed. The Yankee Hill has good reviews about synching down tightly...I have no idea why. If you want to use the Yankee Hill you have to unscrew both screws with an allen wrench almost all of the way out. It is way too painful to do all that for it to rattle when you move your rifle. The Brownells is much easier. Just the single screw to tighten by hand then with a screwdriver for a few turns. Easy, simple and stable. Do yourself a favor, buy Brownells.
Shoots loose(27.02.2016)
450 bushmaster shook it loose don't want to use tread locker as defeats purpose added a lock washer problem solved.
Also Leupold QRW and PRW seats up on the cross block not the ring base.
And if your top set is also a bolt down or lever you have to reverse one of the sets do to clearance issues of the lock nut
N. prodotto: 080000713 BROWNELLS 1/2" MINI RISER MOUNT050806109858 Il rialzo aggiuntivo offre un ulteriore ½" di elevazione o offset a volte necessario per montare un mirino red dot, luce, laser o altro accessorio essenziale. Si fissa saldamente a qualsiasi rail Picatinny MIL-STD 1913 e offre tre slot incrociati Picatinny. Il crossbolt in acciaio e il dado a testa esagonale di grandi dimensioni con fessura consentono un'installazione e rimozione rapide e facili, con o senza attrezzi.
39.9CHF0CHF 39.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Offre un ulteriore ½" di elevazione o offset per accessori come mirini red dot, luci e laser.
Compatibile con slitte Picatinny MIL-STD 1913 e fornisce tre incavi Picatinny.
Facile installazione e rimozione grazie al crossbolt in acciaio e al thumbscrew esagonale.
Caratteristiche
Adatto per:
AR-15
Colore:
Opaco Black
Materiale:
Alluminio
Numero di basi:
1 pezzo
Tipo:
Picatinny
Peso della spedizione: 0.045kgAltezza di spedizione: 20mmLarghezza di spedizione: 79mmLunghezza di spedizione: 157mm
UPC
: 050806109858
Dettagli dell'elemento
Made in Usa
Scopri il rialzo AR-15/M16 di Brownells! Aggiungi ½" di elevazione per accessori come mirini e luci 🔦. Facile da installare su rail Picatinny.
Adds Extra Elevation For Sights & Other Accessories
Add-on riser rail gives an additional ½" of elevation or offset sometimes needed to mount a red dot sight, light, laser, or other essential accessory. Clamps securely to any MIL-STD 1913 Picatinny rail and provides three Picatinny cross-slots. Steel crossbolt and oversized, hex-head slotted thumbscrew enable fast, easy installation and removal, with or without tools.
Aggiunge Elevazione Extra Per Mirini & Altri Accessori
Il rialzo aggiuntivo offre un ulteriore ½" di elevazione o offset a volte necessario per montare un mirino red dot, luce, laser o altro accessorio essenziale. Si fissa saldamente a qualsiasi rail Picatinny MIL-STD 1913 e offre tre slot incrociati Picatinny. Il crossbolt in acciaio e il dado a testa esagonale di grandi dimensioni con fessura consentono un'installazione e rimozione rapide e facili, con o senza attrezzi.
SPECS: Rail – alluminio 6061 T6, anodizzato di colore nero. Crossbolt/Thumbscrew – acciaio 4140, finitura ossidiana nera. 13⁄8" (3.5cm) di lunghezza, 1½" (3.8cm) di larghezza. Fornisce ½" (12.7mm) di elevazione aggiuntiva. Peso di 1.4 oz. (38g).
Altro...
Punteggi dei clienti per BROWNELLS 1/2" MINI RISER MOUNT
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4.5
44 CARBINE BASE MOUNT(09.02.2011)
I BOUGHT A ONE INCH HIGH MICRO MOUNT FOR THE 44 CARBINE THAT I HAVE. ITS JUST TOO HIGH. I MEASURED THIS HALF INCH HIGH RISER AND IT WAS PERFECT.
Superb Quality!(06.08.2011)
Used this to mount a Sig STS-081 red dot sight to my S&W 15/22 rifle. Worked perfect! 1/2" height of the mount, lined it right up with the sights, which are now the back-up sights. Thanks Brownells!
Buy Brownells not Yankee Hill(20.02.2012)
Bought the Yankee Hill and it wobbles on my AR rail. Tried it on every other rail I have and it wobbled on all of them. Bought Brownells and it clamps on tighter than a fishes butt. The bolt is large and sticks out a bit more than I would prefer and it is heavy, but obviously well constructed. The Yankee Hill has good reviews about synching down tightly...I have no idea why. If you want to use the Yankee Hill you have to unscrew both screws with an allen wrench almost all of the way out. It is way too painful to do all that for it to rattle when you move your rifle. The Brownells is much easier. Just the single screw to tighten by hand then with a screwdriver for a few turns. Easy, simple and stable. Do yourself a favor, buy Brownells.
Shoots loose(27.02.2016)
450 bushmaster shook it loose don't want to use tread locker as defeats purpose added a lock washer problem solved.
Also Leupold QRW and PRW seats up on the cross block not the ring base.
And if your top set is also a bolt down or lever you have to reverse one of the sets do to clearance issues of the lock nut