Adds Extra Elevation For Sights & Other Accessories
Add-on riser rail gives an additional ½" of elevation or offset sometimes needed to mount a red dot sight, light, laser, or other essential accessory. Clamps securely to any MIL-STD 1913 Picatinny rail and provides three Picatinny cross-slots. Steel crossbolt and oversized, hex-head slotted thumbscrew enable fast, easy installation and removal, with or without tools.
Ajoute une Élévation Supplémentaire pour les Viseurs et Autres Accessoires
Le rail de surélévation supplémentaire offre une élévation ou un décalage de ½" parfois nécessaire pour monter un viseur point rouge, une lampe, un laser ou un autre accessoire essentiel. Se fixe solidement à tout rail Picatinny MIL-STD 1913 et fournit trois emplacements transversaux Picatinny. Le boulon en acier et la vis à tête hexagonale surdimensionnée permettent une installation et un retrait rapides et faciles, avec ou sans outils.
SPECS : Rail – aluminium 6061 T6, anodisé dur, noir. Vis de serrage/Vis à tête plate – acier 4140, finition oxydée noire. Longueur de 13⁄8" (3,5 cm), largeur de 1½" (3,8 cm). Offre une élévation supplémentaire de ½" (12,7 mm). Poids de 1,4 oz. (38 g).
Plus...
Évaluations client de BROWNELLS 1/2" MINI RISER MOUNT
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 4.5
44 CARBINE BASE MOUNT(09.02.2011)
I BOUGHT A ONE INCH HIGH MICRO MOUNT FOR THE 44 CARBINE THAT I HAVE. ITS JUST TOO HIGH. I MEASURED THIS HALF INCH HIGH RISER AND IT WAS PERFECT.
Superb Quality!(06.08.2011)
Used this to mount a Sig STS-081 red dot sight to my S&W 15/22 rifle. Worked perfect! 1/2" height of the mount, lined it right up with the sights, which are now the back-up sights. Thanks Brownells!
Buy Brownells not Yankee Hill(20.02.2012)
Bought the Yankee Hill and it wobbles on my AR rail. Tried it on every other rail I have and it wobbled on all of them. Bought Brownells and it clamps on tighter than a fishes butt. The bolt is large and sticks out a bit more than I would prefer and it is heavy, but obviously well constructed. The Yankee Hill has good reviews about synching down tightly...I have no idea why. If you want to use the Yankee Hill you have to unscrew both screws with an allen wrench almost all of the way out. It is way too painful to do all that for it to rattle when you move your rifle. The Brownells is much easier. Just the single screw to tighten by hand then with a screwdriver for a few turns. Easy, simple and stable. Do yourself a favor, buy Brownells.
Shoots loose(27.02.2016)
450 bushmaster shook it loose don't want to use tread locker as defeats purpose added a lock washer problem solved.
Also Leupold QRW and PRW seats up on the cross block not the ring base.
And if your top set is also a bolt down or lever you have to reverse one of the sets do to clearance issues of the lock nut
Référence: 080000713 BROWNELLS 1/2" MINI RISER MOUNT050806109858 Le rail de surélévation supplémentaire offre une élévation ou un décalage de ½" parfois nécessaire pour monter un viseur point rouge, une lampe, un laser ou un autre accessoire essentiel. Se fixe solidement à tout rail Picatinny MIL-STD 1913 et fournit trois emplacements transversaux Picatinny. Le boulon en acier et la vis à tête hexagonale surdimensionnée permettent une installation et un retrait rapides et faciles, avec ou sans outils.
39.9CHF0CHF 39.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Adds Extra Elevation For Sights & Other Accessories
Add-on riser rail gives an additional ½" of elevation or offset sometimes needed to mount a red dot sight, light, laser, or other essential accessory. Clamps securely to any MIL-STD 1913 Picatinny rail and provides three Picatinny cross-slots. Steel crossbolt and oversized, hex-head slotted thumbscrew enable fast, easy installation and removal, with or without tools.
Ajoute une Élévation Supplémentaire pour les Viseurs et Autres Accessoires
Le rail de surélévation supplémentaire offre une élévation ou un décalage de ½" parfois nécessaire pour monter un viseur point rouge, une lampe, un laser ou un autre accessoire essentiel. Se fixe solidement à tout rail Picatinny MIL-STD 1913 et fournit trois emplacements transversaux Picatinny. Le boulon en acier et la vis à tête hexagonale surdimensionnée permettent une installation et un retrait rapides et faciles, avec ou sans outils.
SPECS : Rail – aluminium 6061 T6, anodisé dur, noir. Vis de serrage/Vis à tête plate – acier 4140, finition oxydée noire. Longueur de 13⁄8" (3,5 cm), largeur de 1½" (3,8 cm). Offre une élévation supplémentaire de ½" (12,7 mm). Poids de 1,4 oz. (38 g).
Plus...
Évaluations client de BROWNELLS 1/2" MINI RISER MOUNT
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 4.5
44 CARBINE BASE MOUNT(09.02.2011)
I BOUGHT A ONE INCH HIGH MICRO MOUNT FOR THE 44 CARBINE THAT I HAVE. ITS JUST TOO HIGH. I MEASURED THIS HALF INCH HIGH RISER AND IT WAS PERFECT.
Superb Quality!(06.08.2011)
Used this to mount a Sig STS-081 red dot sight to my S&W 15/22 rifle. Worked perfect! 1/2" height of the mount, lined it right up with the sights, which are now the back-up sights. Thanks Brownells!
Buy Brownells not Yankee Hill(20.02.2012)
Bought the Yankee Hill and it wobbles on my AR rail. Tried it on every other rail I have and it wobbled on all of them. Bought Brownells and it clamps on tighter than a fishes butt. The bolt is large and sticks out a bit more than I would prefer and it is heavy, but obviously well constructed. The Yankee Hill has good reviews about synching down tightly...I have no idea why. If you want to use the Yankee Hill you have to unscrew both screws with an allen wrench almost all of the way out. It is way too painful to do all that for it to rattle when you move your rifle. The Brownells is much easier. Just the single screw to tighten by hand then with a screwdriver for a few turns. Easy, simple and stable. Do yourself a favor, buy Brownells.
Shoots loose(27.02.2016)
450 bushmaster shook it loose don't want to use tread locker as defeats purpose added a lock washer problem solved.
Also Leupold QRW and PRW seats up on the cross block not the ring base.
And if your top set is also a bolt down or lever you have to reverse one of the sets do to clearance issues of the lock nut