Never Struggle to charge your AR-15 again! This replacement latch allows you to access your charging handle with ease. Particularly popular among those with a scope on their AR-15, or those who wear gloves while shooting. This latch features extra surface area to reach for when you need to charge your AR-15 rifle. Steel construction with a dark gray finish. Includes latch only, uses existing spring and roll pin. (Does not include spring or roll pin).
SPECS: Fits - AR15/M16 standard charging handles. Finish - Gray. Construction - Steel. Incldes - Latch only. Does not include roll pin or spring.
Altro...
Non lottare mai più per caricare il tuo AR-15! Questa maniglia di sostituzione ti consente di accedere alla tua maniglia di carica con facilità. Particolarmente popolare tra coloro che hanno un'ottica sul loro AR-15, o tra coloro che indossano guanti mentre sparano. Questa maniglia presenta un'area di superficie extra da raggiungere quando hai bisogno di caricare il tuo fucile AR-15. Costruzione in acciaio con una finitura grigio scuro. Include solo la maniglia, utilizza la molla e il perno a molla esistenti. (Non include molla o perno a molla).
SPECIFICHE: Compatibile con - maniglie di carica standard AR15/M16. Finitura - Grigio. Costruzione - Acciaio. Include - Solo la maniglia. Non include il perno a molla o la molla.
Altro...
Punteggi dei clienti per YANKEE HILL MACHINE CO., INC. AR15/M16 CHARGING HANDLE LATCH
Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 4.6
BUY THIS(13.05.2015)
I bought one of these initially from a different website before Brownells started carrying it and was hooked instantly. Once Brownells picked them up I bought 3 more (and will probably buy another 3-4 eventually). A standard handle with this latch is comparable to a BCM large latch charging handle; not identical, and not exactly as good, but comparable. If you're on a budget, this is the way to go. Don't buy any other latches; I'm even considering replacing the PRI latch on my gas buster charging handle, because these are so much nicer. Gives more than enough purchase, isn't so thin that it hurts to pull back with a knife-style hand angle, and it's made by YHM instead of some random over-seas manufacturer like a lot of other latches. Buy this just to try it out. You won't regret it. I just wish I had 3 hands to make installing it easier.
YHM Charge Handle Latch(14.11.2015)
Purchased for a 5.56 gun that had a OEM latch.I have used the ambi type and square oversize type before on others.
After installing this one,I went back and bought a few more to replace my other upgraded ones.I kind of prefer the same feel on all the guns.Now I have put these on my ARs in 308 and 243 as well.
Yes I like this latch.
Only CON.The roll pin is kind of a tricky little deal.Careful the hole is lined up and do not beat it up and make it bigger(use the correct roll pin punch).Center punch next to the holes(lightly) when finished to hold the roll pin secure.Keep in mind the handle is aluminum.
Yankee Hill Latch(07.01.2016)
The pro's: great fit. wide handle with no rough edges and it was easy to install.
The Cons: it is NOT BLACK!!!! It is Battleship Gray! Not even in the realm of black.
I was sorely disappointed... It is advertised as BLACK. I now have a black rifle with a GRAY charging handle latch!
I will be contacting Brownells about the issue. They either need to correct their advertising or,if by some chance I got an odd one, check the product and ensure it matches the description before they ship it.
The photo doesn't show the gray well. It's far more gray than pic!
Great Value(21.03.2016)
Make no mistake, this is an oversized latch. Not as over-the-top as some others, but it sticks out a pretty decent length. Also note that it is more of a dull gray color - it doesn't necessarily look out of place on a black receiver, but it doesn't altogether match either. In any case, the function will please many, disengaging smoothly and promoting firm operation of the mechanism. For me it was actually a little too slick - the catch is smooth enough and the body engage-able enough that it created an impression of looseness that I don't think was actually there. But the edges are nicely rounded to avoid scrapes and excessive snagging, and the gray finish seems to hold up pretty well. It could do with just a bit of refinement as a design, but for such a great price, someone looking for an oversized latch won't be disappointed.
QUALITY!(03.08.2016)
This charging handle is easy in the hands. It is tough and easy to install. Works well with scoped weapons. Thank you Yankee Hill!
these work (01.11.2016)
These are easy to install and they increase the ability to grasp the charging handle. I use shooting gloves when at the range so this product is helpful, when using a scope or any thing that aids the sight profile.
Worth it(30.12.2016)
It isn't an exact match in color as others have stated. More of a blued steel than black anodized aluminum look. Doesn't bother me a bit. Works great. Feels natural in the hand when operating the CH. Does stick out far but not too far. Compared it to a Bcm/Vltor & it is just a hair shorter than their large model. I have several of the B/V CHs & now realize I could've just bought standard CHs & installed this latch on them which would've saved me some money. Only problem I foresee is if you use a sling & keep the gun close to your body, the latch could be uncomfortable sticking into your stomach or chest. I have seen this with the B/V large CH. That's why I'd prefer it to be slightly smaller, but it's still worth it. Easy install with a 1/16" punch. Does not include roll pin or spring in case anyone is wondering. I definitely recommend this latch if you need to upgrade from a standard one.
No Gunsmith Required(15.03.2017)
Easy to Install on my stock DPMS handle. Be careful of the spring. May require light sanding for some handles. Great for operating handle with left hand and perfect if you have full size optics mounted.
REAL DEAL HANDS DOWN(20.05.2017)
Built like a tank , fit Perfect , three min to install. I'm a self taught redneck AR builder that spent a few min online researching the best buy for the money . I found that every man card holding scope user must have. . just took 4 minutes to install. Beat that! Long live freedom flies!
Good low cost high value upgrade(28.12.2017)
Donât let the picture fool you itâs bigger and itâs definitely not black. Fairly easy to install if youâve built ARâs before. It really works well with or without optics. The latch is sturdy enough to rack with one finger. I installed it on my WMD nib-x coated charging handle and itâs so smooth
N. prodotto: 100015922 YANKEE HILL MACHINE CO., INC. AR15/M16 CHARGING HANDLE LATCH Parti Fabbricante: YHM-281 Non lottare mai più per caricare il tuo AR-15! Questa maniglia di sostituzione ti consente di accedere alla tua maniglia di carica con facilità. Particolarmente popolare tra coloro che hanno un'ottica sul loro AR-15, o tra coloro che indossano guanti mentre sparano. Questa maniglia presenta un'area di superficie extra da raggiungere quando hai bisogno di caricare il tuo fucile AR-15. Costruzione in acciaio con una finitura grigio scuro. Include solo la maniglia, utilizza la molla e il perno a molla esistenti. (Non include molla o perno a molla).
32.9CHF1CHF 32.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Facilita il caricamento del tuo AR-15, specialmente con guanti o mirini.
Costruzione in acciaio con finitura grigio scuro per una maggiore durabilità.
Compatibile con maniglie di caricamento standard AR15/M16; include solo il gancio.
Caratteristiche
Adatto per:
AR-15
Peso della spedizione: 0.041kgAltezza di spedizione: 19mmLarghezza di spedizione: 51mmLunghezza di spedizione: 76mm
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Migliora la tua esperienza di ricarica con la maniglia di carica AR-15! 🔧 Facile accesso e design robusto per prestazioni superiori.
Never Struggle to charge your AR-15 again! This replacement latch allows you to access your charging handle with ease. Particularly popular among those with a scope on their AR-15, or those who wear gloves while shooting. This latch features extra surface area to reach for when you need to charge your AR-15 rifle. Steel construction with a dark gray finish. Includes latch only, uses existing spring and roll pin. (Does not include spring or roll pin).
SPECS: Fits - AR15/M16 standard charging handles. Finish - Gray. Construction - Steel. Incldes - Latch only. Does not include roll pin or spring.
Altro...
Non lottare mai più per caricare il tuo AR-15! Questa maniglia di sostituzione ti consente di accedere alla tua maniglia di carica con facilità. Particolarmente popolare tra coloro che hanno un'ottica sul loro AR-15, o tra coloro che indossano guanti mentre sparano. Questa maniglia presenta un'area di superficie extra da raggiungere quando hai bisogno di caricare il tuo fucile AR-15. Costruzione in acciaio con una finitura grigio scuro. Include solo la maniglia, utilizza la molla e il perno a molla esistenti. (Non include molla o perno a molla).
SPECIFICHE: Compatibile con - maniglie di carica standard AR15/M16. Finitura - Grigio. Costruzione - Acciaio. Include - Solo la maniglia. Non include il perno a molla o la molla.
Altro...
Punteggi dei clienti per YANKEE HILL MACHINE CO., INC. AR15/M16 CHARGING HANDLE LATCH
Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 4.6
BUY THIS(13.05.2015)
I bought one of these initially from a different website before Brownells started carrying it and was hooked instantly. Once Brownells picked them up I bought 3 more (and will probably buy another 3-4 eventually). A standard handle with this latch is comparable to a BCM large latch charging handle; not identical, and not exactly as good, but comparable. If you're on a budget, this is the way to go. Don't buy any other latches; I'm even considering replacing the PRI latch on my gas buster charging handle, because these are so much nicer. Gives more than enough purchase, isn't so thin that it hurts to pull back with a knife-style hand angle, and it's made by YHM instead of some random over-seas manufacturer like a lot of other latches. Buy this just to try it out. You won't regret it. I just wish I had 3 hands to make installing it easier.
YHM Charge Handle Latch(14.11.2015)
Purchased for a 5.56 gun that had a OEM latch.I have used the ambi type and square oversize type before on others.
After installing this one,I went back and bought a few more to replace my other upgraded ones.I kind of prefer the same feel on all the guns.Now I have put these on my ARs in 308 and 243 as well.
Yes I like this latch.
Only CON.The roll pin is kind of a tricky little deal.Careful the hole is lined up and do not beat it up and make it bigger(use the correct roll pin punch).Center punch next to the holes(lightly) when finished to hold the roll pin secure.Keep in mind the handle is aluminum.
Yankee Hill Latch(07.01.2016)
The pro's: great fit. wide handle with no rough edges and it was easy to install.
The Cons: it is NOT BLACK!!!! It is Battleship Gray! Not even in the realm of black.
I was sorely disappointed... It is advertised as BLACK. I now have a black rifle with a GRAY charging handle latch!
I will be contacting Brownells about the issue. They either need to correct their advertising or,if by some chance I got an odd one, check the product and ensure it matches the description before they ship it.
The photo doesn't show the gray well. It's far more gray than pic!
Great Value(21.03.2016)
Make no mistake, this is an oversized latch. Not as over-the-top as some others, but it sticks out a pretty decent length. Also note that it is more of a dull gray color - it doesn't necessarily look out of place on a black receiver, but it doesn't altogether match either. In any case, the function will please many, disengaging smoothly and promoting firm operation of the mechanism. For me it was actually a little too slick - the catch is smooth enough and the body engage-able enough that it created an impression of looseness that I don't think was actually there. But the edges are nicely rounded to avoid scrapes and excessive snagging, and the gray finish seems to hold up pretty well. It could do with just a bit of refinement as a design, but for such a great price, someone looking for an oversized latch won't be disappointed.
QUALITY!(03.08.2016)
This charging handle is easy in the hands. It is tough and easy to install. Works well with scoped weapons. Thank you Yankee Hill!
these work (01.11.2016)
These are easy to install and they increase the ability to grasp the charging handle. I use shooting gloves when at the range so this product is helpful, when using a scope or any thing that aids the sight profile.
Worth it(30.12.2016)
It isn't an exact match in color as others have stated. More of a blued steel than black anodized aluminum look. Doesn't bother me a bit. Works great. Feels natural in the hand when operating the CH. Does stick out far but not too far. Compared it to a Bcm/Vltor & it is just a hair shorter than their large model. I have several of the B/V CHs & now realize I could've just bought standard CHs & installed this latch on them which would've saved me some money. Only problem I foresee is if you use a sling & keep the gun close to your body, the latch could be uncomfortable sticking into your stomach or chest. I have seen this with the B/V large CH. That's why I'd prefer it to be slightly smaller, but it's still worth it. Easy install with a 1/16" punch. Does not include roll pin or spring in case anyone is wondering. I definitely recommend this latch if you need to upgrade from a standard one.
No Gunsmith Required(15.03.2017)
Easy to Install on my stock DPMS handle. Be careful of the spring. May require light sanding for some handles. Great for operating handle with left hand and perfect if you have full size optics mounted.
REAL DEAL HANDS DOWN(20.05.2017)
Built like a tank , fit Perfect , three min to install. I'm a self taught redneck AR builder that spent a few min online researching the best buy for the money . I found that every man card holding scope user must have. . just took 4 minutes to install. Beat that! Long live freedom flies!
Good low cost high value upgrade(28.12.2017)
Donât let the picture fool you itâs bigger and itâs definitely not black. Fairly easy to install if youâve built ARâs before. It really works well with or without optics. The latch is sturdy enough to rack with one finger. I installed it on my WMD nib-x coated charging handle and itâs so smooth