Il Carrello è vuoto.

Carrello

Aiuto e contatti

Spedizione gratuita con ordini superiori ad CHF 399

Politica di restituzione di 100 giorni

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

308 AR GAS TUBE WRENCH

133100015

Protects Tube From Crushing During Installation & Removal

Clamps around those fragile, easy-to-bend gas tubes to prevent damage during both removal and installation and adds a convenient handle.

SPECS: Steel, blued. Approximately 6" (15.2cm) long.

Altro...

Protegge il tubo dalla compressione durante l'installazione e la rimozione

Si adatta attorno a quei fragili tubi del gas, facili da piegare, per prevenire danni durante la rimozione e l'installazione, e aggiunge un manico conveniente.

SPECIFICHE: Acciaio, blu. Lunghezza approssimativa di 6" (15,2 cm).

Altro...

Punteggi dei clienti per MARK BROWN CUSTOM GAS TUBE WRENCH

Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 3.7

A must-have for AR15 Armorers (19.06.2009)

Very useful, especially for those of us who have large fingers & hands, and have trouble removing gas tubes. This tool makes removing gas tubes a breeze, even those that have been well-used and are difficult to remove otherwise.

I've removed dozens of gas tubes with this wrench, all with no fuss nor any damage to the gas tube...some were very difficult, and couldn't be done without this wrench unless the gas tube was destroyed in the process.

I've even used it to install several gas tubes. All in all, a very versatile and useful wrench, making it a MUST-HAVE for any AR15/M16/AR10 Armorer or builder.

Definately worth the money (15.08.2009)

This tool is extremely useful for removing gas tubes that have been carboned up and stuck fast in the gas block.

If you do any barrel work on M16/AR15 rifles, you need this tool.

Great quality (14.09.2009)

This wrench is superb. Looks and feels as if you are using a Craftsman product!!

Yes, you do need it. (27.11.2009)

This is one of those tools we have all looked at and said "Looks useful, but I'll just keep using my
old pliers". I did for a couple of years and got tired of chewing up gas tubes. This wrench is the best for removing even the most stubborn carbon caked tubes. Super easy to use. Glad I took the plunge and got the right tool.

Didn't work (29.11.2010)

Tried to remove a stuck gas tube on a Bushmaster M-4. Could not get a good tight hold on the tube, even after adding a piece of rubber for additional grip on the tube. The wrench kept sliding, no matter how tight.

Broke On First Use (31.10.2012)

The first time I tried to use this, the handle spun on the shaft and as a result, I could not get it tight enough to hold onto the gas tube.

Great tool! (27.12.2012)

I got tired of tearing up gas tubes and gave this tool a try. It grabs tight while not harming the tube. Makes removal and assembly very easy. Worth then investment as far as I'm concerned.

Don't waste your money (10.01.2013)

Don't waste your money on this thing it is useless .

Looks fine (12.06.2014)

I use to have one like it for brake lines and it had machined area for lines so yes it was better but this one will work just fine and I will close it, drill it through to give better grab on press.

Leggi più recensioni su brownells.com

46.9 46.9 1 CHF

N. prodotto: 133100015
MARK BROWN CUSTOM GAS TUBE WRENCH
Parti Fabbricante: NONE Si adatta attorno a quei fragili tubi del gas, facili da piegare, per prevenire danni durante la rimozione e l'installazione, e aggiunge un manico conveniente.

46.9 CHF 0 CHF 46.90 *

In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: AR-15

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: AR-15 Peso della spedizione: 0.091kg Altezza di spedizione: 10mm Larghezza di spedizione: 46mm Lunghezza di spedizione: 165mm

Dettagli dell'elemento

Made in Usa

Scopri la chiave per tubi del gas AR-15 di Mark Brown Custom. 🔧 Proteggi i tuoi tubi durante l'installazione e la rimozione con stile!

Protects Tube From Crushing During Installation & Removal

Clamps around those fragile, easy-to-bend gas tubes to prevent damage during both removal and installation and adds a convenient handle.

SPECS: Steel, blued. Approximately 6" (15.2cm) long.

Altro...

Protegge il tubo dalla compressione durante l'installazione e la rimozione

Si adatta attorno a quei fragili tubi del gas, facili da piegare, per prevenire danni durante la rimozione e l'installazione, e aggiunge un manico conveniente.

SPECIFICHE: Acciaio, blu. Lunghezza approssimativa di 6" (15,2 cm).

Altro...

Punteggi dei clienti per MARK BROWN CUSTOM GAS TUBE WRENCH

Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 3.7

A must-have for AR15 Armorers (19.06.2009)

Definately worth the money (15.08.2009)

This tool is extremely useful for removing gas tubes that have been carboned up and stuck fast in the gas block.

If you do any barrel work on M16/AR15 rifles, you need this tool.

Great quality (14.09.2009)

This wrench is superb. Looks and feels as if you are using a Craftsman product!!

Yes, you do need it. (27.11.2009)

Didn't work (29.11.2010)

Broke On First Use (31.10.2012)

The first time I tried to use this, the handle spun on the shaft and as a result, I could not get it tight enough to hold onto the gas tube.

Great tool! (27.12.2012)

I got tired of tearing up gas tubes and gave this tool a try. It grabs tight while not harming the tube. Makes removal and assembly very easy. Worth then investment as far as I'm concerned.

Don't waste your money (10.01.2013)

Don't waste your money on this thing it is useless .

Looks fine (12.06.2014)

I use to have one like it for brake lines and it had machined area for lines so yes it was better but this one will work just fine and I will close it, drill it through to give better grab on press.

Leggi più recensioni su brownells.com