Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 399 CHF

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

308 AR GAS TUBE WRENCH

133100015

Protects Tube From Crushing During Installation & Removal

Clamps around those fragile, easy-to-bend gas tubes to prevent damage during both removal and installation and adds a convenient handle.

SPECS: Steel, blued. Approximately 6" (15.2cm) long.

Plus...

Protège le tube des écrasements lors de l'installation et du retrait

S'enroule autour de ces tubes de gaz fragiles et faciles à plier pour éviter les dommages lors du retrait et de l'installation, tout en ajoutant une poignée pratique.

SPECS : Acier, bleu. Environ 6" (15,2 cm) de long.

Plus...

Évaluations client de MARK BROWN CUSTOM GAS TUBE WRENCH

Nombre d'évaluations: 9
De brownells.com: 9
Note moyenne: 3.7

A must-have for AR15 Armorers (19.06.2009)

Very useful, especially for those of us who have large fingers & hands, and have trouble removing gas tubes. This tool makes removing gas tubes a breeze, even those that have been well-used and are difficult to remove otherwise.

I've removed dozens of gas tubes with this wrench, all with no fuss nor any damage to the gas tube...some were very difficult, and couldn't be done without this wrench unless the gas tube was destroyed in the process.

I've even used it to install several gas tubes. All in all, a very versatile and useful wrench, making it a MUST-HAVE for any AR15/M16/AR10 Armorer or builder.

Definately worth the money (15.08.2009)

This tool is extremely useful for removing gas tubes that have been carboned up and stuck fast in the gas block.

If you do any barrel work on M16/AR15 rifles, you need this tool.

Great quality (14.09.2009)

This wrench is superb. Looks and feels as if you are using a Craftsman product!!

Yes, you do need it. (27.11.2009)

This is one of those tools we have all looked at and said "Looks useful, but I'll just keep using my
old pliers". I did for a couple of years and got tired of chewing up gas tubes. This wrench is the best for removing even the most stubborn carbon caked tubes. Super easy to use. Glad I took the plunge and got the right tool.

Didn't work (29.11.2010)

Tried to remove a stuck gas tube on a Bushmaster M-4. Could not get a good tight hold on the tube, even after adding a piece of rubber for additional grip on the tube. The wrench kept sliding, no matter how tight.

Broke On First Use (31.10.2012)

The first time I tried to use this, the handle spun on the shaft and as a result, I could not get it tight enough to hold onto the gas tube.

Great tool! (27.12.2012)

I got tired of tearing up gas tubes and gave this tool a try. It grabs tight while not harming the tube. Makes removal and assembly very easy. Worth then investment as far as I'm concerned.

Don't waste your money (10.01.2013)

Don't waste your money on this thing it is useless .

Looks fine (12.06.2014)

I use to have one like it for brake lines and it had machined area for lines so yes it was better but this one will work just fine and I will close it, drill it through to give better grab on press.

Lire 9 plus d'avis sur brownells.com

46.9 46.9 1 CHF

Référence: 133100015
MARK BROWN CUSTOM GAS TUBE WRENCH
Ref Fabricant: NONE S'enroule autour de ces tubes de gaz fragiles et faciles à plier pour éviter les dommages lors du retrait et de l'installation, tout en ajoutant une poignée pratique.

46.9 CHF 0 CHF 46.90 *

En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.

Caractéristiques: Manufacture: AR-15

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Manufacture: AR-15 Poids du colis: 0.091kg Hauteur d'expédition: 10mm Largeur d'expédition: 46mm Longueur d'expédition: 165mm

Détails de l'article

Fabriqué au USA

Découvrez la clé de gaz AR-15 de Mark Brown Custom 🔧, conçue pour protéger vos tubes fragiles lors de l'installation et du retrait.

Protects Tube From Crushing During Installation & Removal

Clamps around those fragile, easy-to-bend gas tubes to prevent damage during both removal and installation and adds a convenient handle.

SPECS: Steel, blued. Approximately 6" (15.2cm) long.

Plus...

Protège le tube des écrasements lors de l'installation et du retrait

S'enroule autour de ces tubes de gaz fragiles et faciles à plier pour éviter les dommages lors du retrait et de l'installation, tout en ajoutant une poignée pratique.

SPECS : Acier, bleu. Environ 6" (15,2 cm) de long.

Plus...

Évaluations client de MARK BROWN CUSTOM GAS TUBE WRENCH

Nombre d'évaluations: 9
De brownells.com: 9
Note moyenne: 3.7

A must-have for AR15 Armorers (19.06.2009)

Definately worth the money (15.08.2009)

This tool is extremely useful for removing gas tubes that have been carboned up and stuck fast in the gas block.

If you do any barrel work on M16/AR15 rifles, you need this tool.

Great quality (14.09.2009)

This wrench is superb. Looks and feels as if you are using a Craftsman product!!

Yes, you do need it. (27.11.2009)

Didn't work (29.11.2010)

Broke On First Use (31.10.2012)

The first time I tried to use this, the handle spun on the shaft and as a result, I could not get it tight enough to hold onto the gas tube.

Great tool! (27.12.2012)

I got tired of tearing up gas tubes and gave this tool a try. It grabs tight while not harming the tube. Makes removal and assembly very easy. Worth then investment as far as I'm concerned.

Don't waste your money (10.01.2013)

Don't waste your money on this thing it is useless .

Looks fine (12.06.2014)

I use to have one like it for brake lines and it had machined area for lines so yes it was better but this one will work just fine and I will close it, drill it through to give better grab on press.

Lire 9 plus d'avis sur brownells.com