Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 399 CHF

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

M4 SKINNY STYLE CARBINE HANDGUARD

841348100201 100004515

Rugged, Drop-In Replacement For M4-Style Factory Handguard

Snap-on USGI-type replacement for your carbine’s factory-original handguard is made of tough, fiberglass-reinforced, injection-molded polymer that delivers superior impact and abrasion resistance. The ridged gripping surface and top/bottom vent holes retain the weapon’s authentic military look, while an internal heat shield of lightweight aluminum protects your hand from barrel heat. Skinny models have standard-issue single-layer heat shield on upper and lower handguard. Skinny M4 model has narrower diameter for operators who prefer a minimal bulk handguard. Fits AR-15/M16/M4 with carbine-length gas system.

SPECS: Fiberglass-reinforced polymer, matte black. 6½” (16.5cm) long. Skinny – Approx. 2¼” O.D. at rear tapering to 2” (5.1cm) O.D. at front. Single heat shield only.

Plus...

Remplacement robuste et facile pour le garde-main d'origine de style M4

Remplacement de type USGI à clipser pour le garde-main d'origine de votre carabine, fabriqué en polymère injecté renforcé de fibre de verre, offrant une résistance supérieure aux chocs et à l'abrasion. La surface de préhension rainurée et les trous de ventilation en haut/en bas conservent l'apparence militaire authentique de l'arme, tandis qu'un bouclier thermique interne en aluminium léger protège votre main de la chaleur du canon. Les modèles Skinny ont un bouclier thermique à couche unique standard sur le garde-main supérieur et inférieur. Le modèle Skinny M4 a un diamètre plus étroit pour les utilisateurs qui préfèrent un garde-main minimaliste. S'adapte aux AR-15/M16/M4 avec un système de gaz de longueur carabine.

SPÉCIFICATIONS : Polymère renforcé de fibre de verre, noir mat. 6½” (16,5 cm) de long. Skinny – Environ 2¼” O.D. à l'arrière, s'amincissant à 2” (5,1 cm) O.D. à l'avant. Protection thermique simple uniquement.

Plus...

Évaluations client de DOUBLE STAR SKINNY M4 CARBINE HANDGUARD

Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 5

I would buy these again (11.05.2013)

Good Quality,color matched my rifle perfect,fit with no triming,I would buy these again and recomend them to customers

Highly Recommended (05.07.2013)

Simple - it fits, it looks good, it feels good and the price can't be beat !!! Thanks Brownells

For a better small hand fit (28.05.2014)

These grips are perfect for people like me that have smaller hands The feel is just right. They come in handy for younger shooters too who feel more comfortable being able to wrap more of their hands around them. They really do give better control. Have them on all of my AR style rifles. Lastly, they go on real easy.

Great handguards (21.04.2015)

Used these to replace the factory handguards on my Ruger AR-556 so I could add a rail and foregrip. Worked great and looks nice, too. Very happy!

<img width="500" src='/userdocs/reviewimages/791c1e79-8272-4ac8-b7eb-5982a9c71a2b.jpg' alt=''>

Great replacement handguard (05.10.2015)

Excellent replacement for oversized, double-heatshield handguards now used on Colt CAR-15s. These are a near perfect match for the original slim handguards that used to come standard on Colt CAR rifles. They are much easier to grip than the larger style. Great quality.

Great product but does not fit Bushmaste (03.11.2015)

I noted that one of the reviewers talked bout fitness issue for Bushmaster. But, I still placed order and received the product within only 3 business days. Fast delivery, great quality, beautiful appearance, it does not fit Bushmaster directly on the large end. But, it is not a big deal. I spent only one hour with basic hand tools modifying the lip structure slightly. Then, it fitted in almost perfectly without any noticeable issue. Satisfied completely. I am very handy, but I still believe anybody can get the project done with maybe a little longer time.

Excellent - will buy again (20.07.2016)

Tight, solid fit. Seams line up perfectly. Doesn't flex, move or give when handled. I purchased one because I needed it. After that I purchased two more just to replace a couple of cheapy ones I was using. Highly recommend, excellent. I'm going to keep my eye on this brand as I look for other items.

Great Handguard, with a little fitting (28.06.2017)

Had to sand down ever so slightly the end that went into the delta ring. After install, was good snug fit. Looks great on my two LMTs

Worth Much More ! (18.06.2018)

I have a PSA A4 upper that came with PSA's hand guards which are odd at best. They are oval in shape, not round, and are quite large (fat). I ordered these skinny hand guards, but to be honest I wasn't expecting much due to the low cost. I'm glad I took the chance because they popped on with zero issues or difficulty. They seem quite well made, no squeak/wiggle etc. I plan on ordering another pair to keep on the shelf for a future build.

Great and unbelievable low price (04.07.2018)

Never put one on before. Had top rotated a little and didn't notice. Seemed to fit about 95% but after looking at it, a slight 1/16" twist let it lock into place perfectly. Looks great on my Colt 6720 and if you didn't have my 6721 or Lightweight Sporter there beside it, you'd not notice any difference from OEM. Way better than the double heat shield stock unit.

Lire 10 plus d'avis sur brownells.com

22.9 22.9 1 CHF

Référence: 100004515
DOUBLE STAR SKINNY M4 CARBINE HANDGUARD
Ref Fabricant: AR414 841348100201 Remplacement de type USGI à clipser pour le garde-main d'origine de votre carabine, fabriqué en polymère injecté renforcé de fibre de verre, offrant une résistance supérieure aux chocs et à l'abrasion. La surface de préhension rainurée et les trous de ventilation en haut/en bas conservent l'apparence militaire authentique de l'arme, tandis qu'un bouclier thermique interne en aluminium léger protège votre main de la chaleur du canon. Les modèles Skinny ont un bouclier thermique à couche unique standard sur le garde-main supérieur et inférieur. Le modèle Skinny M4 a un diamètre plus étroit pour les utilisateurs qui préfèrent un garde-main minimaliste. S'adapte aux AR-15/M16/M4 avec un système de gaz de longueur carabine.

22.9 CHF 314 CHF 22.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Couleur: Noir Longueur: 6 Manufacture: AR-15 Matériaux: Polymer Style: Lisse Type: Drop-In

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Remplacement snap-on en polymère renforcé de fibre de verre pour une résistance supérieure.
Surface de préhension striée et bouclier thermique interne en aluminium léger pour protéger ta main.
S'adapte aux AR-15/M16/M4 avec un système de gaz de longueur carabine, idéal pour ceux qui préfèrent un garde-main plus fin.

Caractéristiques

Couleur: Noir Longueur: 6 Manufacture: AR-15 Matériaux: Polymer Style: Lisse Type: Drop-In Poids du colis: 0.136kg Hauteur d'expédition: 58mm Largeur d'expédition: 58mm Longueur d'expédition: 185mm UPC : 841348100201

Détails de l'article

Fabriqué au USA
US export classification: 0A501.y.1

Améliore ton AR-15 avec le garde-main Skinny de DOUBLE STAR. 💪 Résistant, léger et au look militaire, idéal pour un style minimaliste.

Rugged, Drop-In Replacement For M4-Style Factory Handguard

SPECS: Fiberglass-reinforced polymer, matte black. 6½” (16.5cm) long. Skinny – Approx. 2¼” O.D. at rear tapering to 2” (5.1cm) O.D. at front. Single heat shield only.

Plus...

Remplacement robuste et facile pour le garde-main d'origine de style M4

Plus...