Positive Stops At On & Off; Simple, Fast Installation
The re-make of the famous Buehler Low Safety. Faster and much more convenient to operate than the factory safety plus, it will not interfere with even the lowest mounted scopes. Rotates through a 70° arc on the right side of the rifle with positive stops in both the "on" and "off" positions. Securely holds the bolt and the striker in the locked position. Precision CNC machined from high-quality steel, hardened at all wear points, polished and blued. No machining required for installation on M98. M93/96 may require grinding of cocking piece.
Arrêts Positifs À On & Off ; Installation Simple et Rapide
La réédition de la célèbre sécurité Buehler Low. Plus rapide et beaucoup plus pratique à utiliser que la sécurité d'origine, de plus, elle n'interfère pas même avec les lunettes montées très basses. Elle pivote sur un arc de 70° sur le côté droit du fusil avec des arrêts positifs dans les positions "on" et "off". Maintient solidement la culasse et le percuteur en position verrouillée. Usinée avec précision par CNC à partir d'acier de haute qualité, durcie à tous les points d'usure, polie et bleue. Aucun usinage requis pour l'installation sur M98. M93/96 peut nécessiter un meulage de la pièce de percussion.
SPECIFICATIONS : Acier, bleu. Largeur de .490" (12,4 mm), longueur de .725" (18,4 mm). M98 compatible avec Mauser M98 & FN. M93/96 compatible avec Mauser 93, 94, 95, 96 & 97 Small Ring.
Plus...
Évaluations client de TIMNEY M98 SAFETY
Nombre d'évaluations: 13
De brownells.com: 13
Note moyenne: 3.2
Requires Machining to Install(16.11.2009)
On the M-96 Swedish Mauser this safety requires at least 1/8" removed from the cocking piece to clear the safety body with a countersink for the safety screw head (my option). The other option is to grind about half of the cocking piece off on the safety side. Either way you also need to grind an angle on the cocking piece where the safety engages it. It helps to increase the bevel on the safety as well. The safety works okay - about like a Mark 2. Timney should modify to eliminate the machining - it wouldn't take much.
Nice product(01.10.2011)
I had to remove a bit of the lip on the lever portion to clear the standard safety ridge on the bolt shroud, and had to bevel down the engagement ramp as it will not clear the cocking piece as it comes. I used a Dremel with a cut-off wheel(VERY gently), and then a 240 sanding wheel to smooth it out. You could probably do the same with various grit sanding wheels. The screw is a T-7.
Does not work(15.08.2012)
Safety does not have spring and detent so is not functional as sent.
Beware of LOCTITE!!!!!(10.12.2014)
Installed this on a Voere, commercial Mauser. Pretty much dropped right in, I'll have to SLIGHTLY releive the cocking peice, but no big deal...
The BIG issue I had:
Timney apparently decided it was necessary to RED LOCTITE the screw in, on a part that HAS to be taken apart for installation!!!!!!!
Needless to say I have a stripped allen screw, and a pretty ugly mark on it where I wound up using pliers to then get the screw out!!!!!
IF you buy this, put some heat to it before you try to take the screw out.....
A product that really works(15.09.2009)
Very easy to install
Fitting was required!(01.06.2010)
I ordered the m98 safety, but the one I received must have been the m93/96. It required removal of quite a bit of material to fit properly.
Best aftermarket Mauser safety(16.08.2010)
Easy to install... just read and follow the directions. If you don't know enough or can't install this item correctly, you shouldn't be messing with the safety in the first place.
Great Product(05.03.2013)
I have installed over twenty of these safeties.. they are the best aftermarket M-98 Mauser safety available.... period!!!
Works well(10.02.2014)
I installed this safety on a Czech Brno 98 Mauser. I needed to grind away a little material off of the cocking piece to get it to work, but that is part of the normal installation. Going slow and testing it over and over as you remove material will get you a good fit. It's a good deal for the money. It's not a perfectly smooth safety, but it is way better than the original 3 position safety and this one will clear the scope.
Didn't work for me(21.07.2014)
Skimpy on the instructions and requires more fitting than I have tools for. Mine went in the spare parts box.
Overpriced garbage(17.07.2015)
tried installing in a vz-24 doesn't even bother to allow the bolt shroud to fully spin back into the bolt body.
Much love for Timney(12.12.2015)
Much easier to install than previous options. Looks great, works great. Take it to a smith for proper installation and testing because it is worth having on your Mauser.
Great part. Not so great instructions(29.09.2016)
I might be fortunate. I see some other reviews where fitting was required. This wasn't the case with my rifle. The timney safety dropped right in and was an excellent fit in my BRNO VZ24.
The instructions were a little light. I think they could have been a little more descriptive with the directions. Thankfully I am familiar with how a 98 Mauser safety works, and was able to get it installed regardless. Had it not been for the light instructions I would have rated this part 5 stars.
Référence: 883804098 TIMNEY M98 SAFETY Ref Fabricant: 1001081950010011 La réédition de la célèbre sécurité Buehler Low. Plus rapide et beaucoup plus pratique à utiliser que la sécurité d'origine, de plus, elle n'interfère pas même avec les lunettes montées très basses. Elle pivote sur un arc de 70° sur le côté droit du fusil avec des arrêts positifs dans les positions "on" et "off". Maintient solidement la culasse et le percuteur en position verrouillée. Usinée avec précision par CNC à partir d'acier de haute qualité, durcie à tous les points d'usure, polie et bleue. Aucun usinage requis pour l'installation sur M98. M93/96 peut nécessiter un meulage de la pièce de percussion.
119.9CHF31CHF 119.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Référence: 883805096 TIMNEY M93/96 SAFETY Ref Fabricant: 1002081950010028 La réédition de la célèbre sécurité Buehler Low. Plus rapide et beaucoup plus pratique à utiliser que la sécurité d'origine, de plus, elle n'interfère pas même avec les lunettes montées très basses. Elle pivote sur un arc de 70° sur le côté droit du fusil avec des arrêts positifs dans les positions "on" et "off". Maintient solidement la culasse et le percuteur en position verrouillée. Usinée avec précision par CNC à partir d'acier de haute qualité, durcie à tous les points d'usure, polie et bleue. Aucun usinage requis pour l'installation sur M98. M93/96 peut nécessiter un meulage de la pièce de percussion.
119.9CHF7CHF 119.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Positive Stops At On & Off; Simple, Fast Installation
The re-make of the famous Buehler Low Safety. Faster and much more convenient to operate than the factory safety plus, it will not interfere with even the lowest mounted scopes. Rotates through a 70° arc on the right side of the rifle with positive stops in both the "on" and "off" positions. Securely holds the bolt and the striker in the locked position. Precision CNC machined from high-quality steel, hardened at all wear points, polished and blued. No machining required for installation on M98. M93/96 may require grinding of cocking piece.
Arrêts Positifs À On & Off ; Installation Simple et Rapide
La réédition de la célèbre sécurité Buehler Low. Plus rapide et beaucoup plus pratique à utiliser que la sécurité d'origine, de plus, elle n'interfère pas même avec les lunettes montées très basses. Elle pivote sur un arc de 70° sur le côté droit du fusil avec des arrêts positifs dans les positions "on" et "off". Maintient solidement la culasse et le percuteur en position verrouillée. Usinée avec précision par CNC à partir d'acier de haute qualité, durcie à tous les points d'usure, polie et bleue. Aucun usinage requis pour l'installation sur M98. M93/96 peut nécessiter un meulage de la pièce de percussion.
SPECIFICATIONS : Acier, bleu. Largeur de .490" (12,4 mm), longueur de .725" (18,4 mm). M98 compatible avec Mauser M98 & FN. M93/96 compatible avec Mauser 93, 94, 95, 96 & 97 Small Ring.
Plus...
Évaluations client de TIMNEY M98 SAFETY
Nombre d'évaluations: 13
De brownells.com: 13
Note moyenne: 3.2
Requires Machining to Install(16.11.2009)
On the M-96 Swedish Mauser this safety requires at least 1/8" removed from the cocking piece to clear the safety body with a countersink for the safety screw head (my option). The other option is to grind about half of the cocking piece off on the safety side. Either way you also need to grind an angle on the cocking piece where the safety engages it. It helps to increase the bevel on the safety as well. The safety works okay - about like a Mark 2. Timney should modify to eliminate the machining - it wouldn't take much.
Nice product(01.10.2011)
I had to remove a bit of the lip on the lever portion to clear the standard safety ridge on the bolt shroud, and had to bevel down the engagement ramp as it will not clear the cocking piece as it comes. I used a Dremel with a cut-off wheel(VERY gently), and then a 240 sanding wheel to smooth it out. You could probably do the same with various grit sanding wheels. The screw is a T-7.
Does not work(15.08.2012)
Safety does not have spring and detent so is not functional as sent.
Beware of LOCTITE!!!!!(10.12.2014)
Installed this on a Voere, commercial Mauser. Pretty much dropped right in, I'll have to SLIGHTLY releive the cocking peice, but no big deal...
The BIG issue I had:
Timney apparently decided it was necessary to RED LOCTITE the screw in, on a part that HAS to be taken apart for installation!!!!!!!
Needless to say I have a stripped allen screw, and a pretty ugly mark on it where I wound up using pliers to then get the screw out!!!!!
IF you buy this, put some heat to it before you try to take the screw out.....
A product that really works(15.09.2009)
Very easy to install
Fitting was required!(01.06.2010)
I ordered the m98 safety, but the one I received must have been the m93/96. It required removal of quite a bit of material to fit properly.
Best aftermarket Mauser safety(16.08.2010)
Easy to install... just read and follow the directions. If you don't know enough or can't install this item correctly, you shouldn't be messing with the safety in the first place.
Great Product(05.03.2013)
I have installed over twenty of these safeties.. they are the best aftermarket M-98 Mauser safety available.... period!!!
Works well(10.02.2014)
I installed this safety on a Czech Brno 98 Mauser. I needed to grind away a little material off of the cocking piece to get it to work, but that is part of the normal installation. Going slow and testing it over and over as you remove material will get you a good fit. It's a good deal for the money. It's not a perfectly smooth safety, but it is way better than the original 3 position safety and this one will clear the scope.
Didn't work for me(21.07.2014)
Skimpy on the instructions and requires more fitting than I have tools for. Mine went in the spare parts box.
Overpriced garbage(17.07.2015)
tried installing in a vz-24 doesn't even bother to allow the bolt shroud to fully spin back into the bolt body.
Much love for Timney(12.12.2015)
Much easier to install than previous options. Looks great, works great. Take it to a smith for proper installation and testing because it is worth having on your Mauser.
Great part. Not so great instructions(29.09.2016)
I might be fortunate. I see some other reviews where fitting was required. This wasn't the case with my rifle. The timney safety dropped right in and was an excellent fit in my BRNO VZ24.
The instructions were a little light. I think they could have been a little more descriptive with the directions. Thankfully I am familiar with how a 98 Mauser safety works, and was able to get it installed regardless. Had it not been for the light instructions I would have rated this part 5 stars.