Flat blade gives a crisp, target-style sight picture that eliminates the distracting Òdouble-notchÓ found on factory sights. .160" high blade (same as factory) features an angled and serrated rear face that reduces glare. Extends over the rear of the sight body for a cleaner look and gives a slight increase in sight radius. Available in two notch widths, .110" for target and PPC use, plus .125" for IPSC, IDPA and pin shooting. Deeper notch gives easier eye alignment.
SPECS: 6061-T6 aluminum, matte black, anodized. Heat treated. .700" (17.8mm) blade width, .371" (9.4mm) height, .350" (8.9mm) long. .085" (2.2mm) deep notch. Kit includes windage screw assembly for installation. Fits Smith & Wesson K, L, and N frame revolvers. Will work on all with adjustable sights.
Altro...
Fornisce Un'Immagine Del Mirino Nitida e Facile Da Allineare
La lama piatta offre un'immagine del mirino nitida e in stile target che elimina il fastidioso "doppio notch" presente nei mirini di fabbrica. La lama alta .160" (la stessa dei mirini di fabbrica) presenta una faccia posteriore angolata e seghettata che riduce il riflesso. Si estende oltre la parte posteriore del corpo del mirino per un aspetto più pulito e offre un leggero aumento del raggio di mira. Disponibile in due larghezze di notch, .110" per uso target e PPC, più .125" per IPSC, IDPA e tiro al pin. Notch più profondo per un allineamento degli occhi più facile.
SPECS: Alluminio 6061-T6, nero opaco, anodizzato. Trattato termicamente. Larghezza della lama di .700" (17.8mm), altezza di .371" (9.4mm), lunghezza di .350" (8.9mm). Notch profondo di .085" (2.2mm). Il kit include l'assemblaggio della vite di deriva per l'installazione. Si adatta ai revolver Smith & Wesson K, L e N frame. Funziona su tutti con mirini regolabili.
Altro...
Punteggi dei clienti per BROWNELLS COMPETITION REAR SIGHT BLADE KIT .125"
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4.8
Great choice(08.03.2013)
This is being used on a S&W 625JM for competitive shooting. Searching the web, some people complained that the new blade had "play" and would wiggle around. Not the case for me, it's in there rock solid. In full disclosure I had a revolver gunsmith install it for minimal cost, so I can't say how difficult it was to put on. It's worth it though, the sight picture is incredible for a fraction of the cost compared to other options. The notch is a perfect .125" and appears to be slightly deeper, which is good. It also comes with the replacement parts for installation which is something other brands don't do, about a $10-15 value. It's a very functional piece that I expect will help my scores, especially on the long shots. It really should come with this from the factory. If used on a self-defense revolver there is a chance it could snag on clothing, as the edges are sharp, but for a competition gun that's a good thing.
extraordinary rear sight(05.08.2011)
Excellent product for smith & wesson k-frame 14 model target masterpiece.
Great upgrade(06.06.2012)
I didn't read the description completely and ordered a new windage screw. This kit comes with the screw/nut/detent/and spring to replace the hardware you have to break to put the new blade in.
This blade pairs great with a sdm fiber optic front. I have them on my 617-4 and my 686-5
Works great for the price. All you need(02.08.2017)
Sight is easy enough to install if you follow the directions.
It includes EVERYTHING you need, and some spares in case you lose bits. Nice touch.
Once installed, it's tighter in windage vs the stock sight. But there's a slight amount of rotational (fore aft) play, which because of the rear offset, results in slight up/down play.
Most likely it won't make a noticeable effect during target shooting, but we will test it pushing it both ways and see if it changes point of impact.
Sight picture Is VASTLY superior to stock. I found the .110 aperture perfect on an S&W 625 with 5" barrel.
For defensive use, the stock sight is stronger simply because it doesn't have a large piece hanging off the back. I suspect a strong hit will bend or break this aluminum unit. But for paper punching, even hunting, you can't beat the sight picture. It's really outstanding.
N. prodotto: 078000013 BROWNELLS COMPETITION REAR SIGHT BLADE KIT .125"050806003309 La lama piatta offre un'immagine del mirino nitida e in stile target che elimina il fastidioso "doppio notch" presente nei mirini di fabbrica. La lama alta .160" (la stessa dei mirini di fabbrica) presenta una faccia posteriore angolata e seghettata che riduce il riflesso. Si estende oltre la parte posteriore del corpo del mirino per un aspetto più pulito e offre un leggero aumento del raggio di mira. Disponibile in due larghezze di notch, .110" per uso target e PPC, più .125" per IPSC, IDPA e tiro al pin. Notch più profondo per un allineamento degli occhi più facile.
54.9CHF0CHF 54.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Smith & WessonColore delle mire: BlackModello: K Frame, L Frame, N FrameTipo: Target
La lama piatta offre un'immagine di mira nitida e riduce le distrazioni del doppio notch.
Disponibile in due larghezze di notch, .110" per tiro a bersaglio e PPC, e .125" per IPSC e IDPA.
Compatibile con i revolver Smith & Wesson K, L e N frame, con un'installazione semplice grazie all'assemblaggio della vite di deriva incluso.
Caratteristiche
Adatto per:
Smith & Wesson
Colore delle mire:
Black
Modello:
K Frame,L Frame,N Frame
Tipo:
Target
Peso della spedizione: 0.045kgAltezza di spedizione: 23mmLarghezza di spedizione: 81mmLunghezza di spedizione: 145mm
UPC
: 050806003309
Dettagli dell'elemento
Made in Usa
Migliora la tua precisione con il COMPETITION REAR SIGHT BLADE KIT di BROWNELLS! 🎯 Adatto per revolver Smith & Wesson, offre un mirino nitido.
Flat blade gives a crisp, target-style sight picture that eliminates the distracting Òdouble-notchÓ found on factory sights. .160" high blade (same as factory) features an angled and serrated rear face that reduces glare. Extends over the rear of the sight body for a cleaner look and gives a slight increase in sight radius. Available in two notch widths, .110" for target and PPC use, plus .125" for IPSC, IDPA and pin shooting. Deeper notch gives easier eye alignment.
SPECS: 6061-T6 aluminum, matte black, anodized. Heat treated. .700" (17.8mm) blade width, .371" (9.4mm) height, .350" (8.9mm) long. .085" (2.2mm) deep notch. Kit includes windage screw assembly for installation. Fits Smith & Wesson K, L, and N frame revolvers. Will work on all with adjustable sights.
Altro...
Fornisce Un'Immagine Del Mirino Nitida e Facile Da Allineare
La lama piatta offre un'immagine del mirino nitida e in stile target che elimina il fastidioso "doppio notch" presente nei mirini di fabbrica. La lama alta .160" (la stessa dei mirini di fabbrica) presenta una faccia posteriore angolata e seghettata che riduce il riflesso. Si estende oltre la parte posteriore del corpo del mirino per un aspetto più pulito e offre un leggero aumento del raggio di mira. Disponibile in due larghezze di notch, .110" per uso target e PPC, più .125" per IPSC, IDPA e tiro al pin. Notch più profondo per un allineamento degli occhi più facile.
SPECS: Alluminio 6061-T6, nero opaco, anodizzato. Trattato termicamente. Larghezza della lama di .700" (17.8mm), altezza di .371" (9.4mm), lunghezza di .350" (8.9mm). Notch profondo di .085" (2.2mm). Il kit include l'assemblaggio della vite di deriva per l'installazione. Si adatta ai revolver Smith & Wesson K, L e N frame. Funziona su tutti con mirini regolabili.
Altro...
Punteggi dei clienti per BROWNELLS COMPETITION REAR SIGHT BLADE KIT .125"
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4.8
Great choice(08.03.2013)
This is being used on a S&W 625JM for competitive shooting. Searching the web, some people complained that the new blade had "play" and would wiggle around. Not the case for me, it's in there rock solid. In full disclosure I had a revolver gunsmith install it for minimal cost, so I can't say how difficult it was to put on. It's worth it though, the sight picture is incredible for a fraction of the cost compared to other options. The notch is a perfect .125" and appears to be slightly deeper, which is good. It also comes with the replacement parts for installation which is something other brands don't do, about a $10-15 value. It's a very functional piece that I expect will help my scores, especially on the long shots. It really should come with this from the factory. If used on a self-defense revolver there is a chance it could snag on clothing, as the edges are sharp, but for a competition gun that's a good thing.
extraordinary rear sight(05.08.2011)
Excellent product for smith & wesson k-frame 14 model target masterpiece.
Great upgrade(06.06.2012)
I didn't read the description completely and ordered a new windage screw. This kit comes with the screw/nut/detent/and spring to replace the hardware you have to break to put the new blade in.
This blade pairs great with a sdm fiber optic front. I have them on my 617-4 and my 686-5
Works great for the price. All you need(02.08.2017)
Sight is easy enough to install if you follow the directions.
It includes EVERYTHING you need, and some spares in case you lose bits. Nice touch.
Once installed, it's tighter in windage vs the stock sight. But there's a slight amount of rotational (fore aft) play, which because of the rear offset, results in slight up/down play.
Most likely it won't make a noticeable effect during target shooting, but we will test it pushing it both ways and see if it changes point of impact.
Sight picture Is VASTLY superior to stock. I found the .110 aperture perfect on an S&W 625 with 5" barrel.
For defensive use, the stock sight is stronger simply because it doesn't have a large piece hanging off the back. I suspect a strong hit will bend or break this aluminum unit. But for paper punching, even hunting, you can't beat the sight picture. It's really outstanding.