Plus de 300 000 clients - nous vous disons merci !

40 000+ produits pour la chasse et le tir sportif

EGW
CZ P10C, P10F VORTEX VIPER/VENOM SIGHT MOUNT

841370116010 296000675
"""""""""""EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This Mount Does Not Fit: CZ P10C Optics Ready CZ P10F Optics Ready
79.9 79.9 1 CHF
Référence: 296000675
EGW SIGHT MOUNT FOR VORTEX VIPER/VENOM FITS CZ P10C/P10F BLACK
Ref Fabricant: 49329 841370116010
79.9 CHF 2 CHF 79.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Couleur: Noir Manufacture: CZ Matériaux: Aluminum Modèle: P-10F, P-10C Nombre d'Embases: 1-Pièce Style: Tactique

Caractéristiques

Couleur: Noir Manufacture: CZ Matériaux: Aluminum Modèle: P-10C,P-10F Nombre d'Embases: 1-Pièce Style: Tactique Poids du colis: 0.045kg Hauteur d'expédition: 25mm Largeur d'expédition: 76mm Longueur d'expédition: 140mm UPC : 841370116010

Détails de l'article

Fabriqué au USA




"""""""""""EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This Mount Does Not Fit: CZ P10C Optics Ready CZ P10F Optics Ready
Retour en haut de page