Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

EGW
SPRINGFIELD XD, XDM VORTEX RAZOR SIGHT MOUNT

841370113057 296000695
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount fits: All XD Models that are NOT the Optics Ready Model This includes, but is not limited to: Springfield XD® MOD.2® – 3"" SUB-COMPACT MODEL Springfield XD® MOD.2® – 3.3"" SUB-COMPACT MODEL Springfield XD® MOD.2® – 4"" SERVICE MODEL Springfield XD® MOD.2® – 4"" SERVICE MODEL THREADED BARREL Springfield XD® MOD.2® – 5"" TACTICAL MODEL Springfield XD® 3"" SUB-COMPACT MODEL Springfield XD® 4"" SERVICE MODEL Springfield XD(M)® 3.8"" COMPACT MODEL Springfield XD(M)® 3.8"" MODEL Springfield XD(M)® 4.5"" MODEL Springfield XD(M)® 4.5"" THREADED BARREL MODEL Springfield XD-S® 3.3"" MODEL Springfield XD-E™ 3.3"" SINGLE STACK Springfield XD-E™ 3.8"" SINGLE STACK Does not fit: Springfield XD(M)® 5.25"" COMPETITION SERIES MODEL Any Optics Ready Springfield XD
79.9 79.9 1 CHF
N. prodotto: 296000695
EGW SIGHT MOUNT FOR VORTEX RAZOR FITS SPRINGFIELD XD/XDM BLACK
Parti Fabbricante: 49442 841370113057
79.9 CHF 1 CHF 79.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Springfield Colore: Black Materiale: Alluminio Modello: XD-Subcompact, XD Mod 2, XDS, XDM, XD-E Numero di basi: 1 pezzo Tipo: Tattico

Caratteristiche

Adatto per: Springfield Colore: Black Materiale: Alluminio Modello: XD-E,XD-Subcompact,XDM,XDS,XD Mod 2 Numero di basi: 1 pezzo Tipo: Tattico Peso della spedizione: 0.045kg Altezza di spedizione: 25mm Larghezza di spedizione: 76mm Lunghezza di spedizione: 140mm UPC : 841370113057

Dettagli dell'elemento

Made in Usa



Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount fits: All XD Models that are NOT the Optics Ready Model This includes, but is not limited to: Springfield XD® MOD.2® – 3"" SUB-COMPACT MODEL Springfield XD® MOD.2® – 3.3"" SUB-COMPACT MODEL Springfield XD® MOD.2® – 4"" SERVICE MODEL Springfield XD® MOD.2® – 4"" SERVICE MODEL THREADED BARREL Springfield XD® MOD.2® – 5"" TACTICAL MODEL Springfield XD® 3"" SUB-COMPACT MODEL Springfield XD® 4"" SERVICE MODEL Springfield XD(M)® 3.8"" COMPACT MODEL Springfield XD(M)® 3.8"" MODEL Springfield XD(M)® 4.5"" MODEL Springfield XD(M)® 4.5"" THREADED BARREL MODEL Springfield XD-S® 3.3"" MODEL Springfield XD-E™ 3.3"" SINGLE STACK Springfield XD-E™ 3.8"" SINGLE STACK Does not fit: Springfield XD(M)® 5.25"" COMPETITION SERIES MODEL Any Optics Ready Springfield XD
Torna all'inizio