Designed to give you the edge over your competition. Patented, proven push-pin design Quickly and easily attaches to and detaches from the magazine tube No specialty tools or devices required for assembly/disassembly One piece design, no small parts to keep track of Fits the USPSA 140mm guage Holds 20+1 rounds of 40S&W Holds 23+1 rounds of 9mm Easy to load into the gun with fully loaded magazine Adds weight to magazine base to help mags drop free easier for faster reloads Made in the USA
SPECS: CNC machined from billet aluminum. Hard Anodized
Altro...
Aumenta la Capacità del Caricatore & Facilita la Caduta del Caricatore
Progettato per darti un vantaggio sulla concorrenza. Design brevettato e collaudato con perno a spinta Si attacca e si stacca rapidamente e facilmente dal tubo del caricatore Non sono necessari strumenti o dispositivi speciali per l'assemblaggio/disassemblaggio Design monopezzo, nessuna piccola parte da tenere d'occhio Si adatta al calibro USPSA 140mm Contiene 20+1 colpi di 40S&W Contiene 23+1 colpi di 9mm Facile da caricare nella pistola con il caricatore completamente carico Aggiunge peso alla base del caricatore per facilitare la caduta dei caricatori e ricariche più rapide Prodotto negli Stati Uniti
SPECIFICHE: lavorato CNC da alluminio estruso. Anodizzato duro
Altro...
Punteggi dei clienti per TARAN TACTICAL INNOVATIONS FIREPOWER BASE PAD KIT FOR GLOCK®, FLAT BLACK
Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 3.3
G17/22 Mags, not G19/23(04.04.2018)
This base pad extension is made for full-size Glock magazines, and will cant Glock 19/23 magazines. The cant can cause malfunctions and/or decrease compacity. The site did not show option for compact or full-size selection, just 9/40 or 45. Luckily, I know someone with an extra base pad for G19 that is going to swap with me. Please offer in the future so other customers do not have the same issue.
Good ideaBUT..(11.09.2013)
Bad if you run a mag well on your glock, the way this secures is by a pin that protrudes up and down which is held in place (barely I might add) by an allen screw and prevents the base pad from sliding back off the mag by using the back of the mag, so this sticks up and hits the magwell first. For 2 more rounds its not worth the chance of this sliding off... I shoot a fair amount of IPSC and 3 gun was hoping for something more solid...
Great Basepads(28.10.2013)
I too am a competitive shooter primarily in USPSA but also compete in 3 gun. I've used the Arredondos previously which are a good design. The TT basepads uses AL vs. plastic (Arredondos) but at the same price. The capacity are the same for the different brands. I use the basepads on a Glock with a Dawson Precision mag well. I have no issues with interference with the retaining pin on the TT basepads. Time will tell how durable the TT basepads are as I just started using them.
Several malfunctions (17.09.2014)
Several malfunctions with this product. I returned the magazines to OEM and the magazines work flawless.
Sold construction for added firepower(14.07.2015)
The other reviews seemed to have issues, so far I have had none. My first try with this +6 base pad was adding it my glock 26 mags. While I needed to use a Glock 17 magazine spring, the product worked flawless and now I have 16+1 in my Glock 26 with the frame length between a G19 and G17 so it is still concealable. I own several more now. Great buy!
Good!(28.01.2016)
I've bought a couple of these and they seem to run fine for me. The construction and the way they attach to the magazine itself is my only complaint. The set screws have stripped out so I have just used the red loctite on the set pin itself and that holds very well. No problem with running these in my Glock in reference to the mag well.
Great Product(16.05.2016)
I read the low reviews and I had to shake my head. Yes, these will not work with some magwells because there are no set standards for a magwell. In terms of malfunctions, I have no experienced any. The included +10% spring works great. What does this base extension do? It adds an extra 6 rounds for your Glock 17 magazines, adds extra weight at the base so it helps ensure the magazine drops away when empty during a reload. I own six of these and they never fail to function. Highly recommend.
Another quality product(06.06.2016)
This is a really solid product. I too have been using Arredondo's for years and quite honestly, never experienced a failure. I saw these displayed at SHOT and was interested. So far after months of hard running these have performed the same, no issues. If installed properly I can't see these ever coming off inadvertently. I check the little set screw pin locker every once in a while, just in case, and it has not budged. A great product made out of AL at the same price point.
Well worth the money(16.07.2017)
I've been running these for a couple years now and they are still as solid as the day I received them. You have to check prior to buying if they are compatible with your magwell. An extra 6 rounds is always appreciated whether you're working the streets or gunning in a competition.
Failure to feed from plus 2 capacity. (04.08.2017)
Have had multiple failures to feed from the spring binding up in the extension. Will replace with tried and true Dawson precision. Wish I had never wasted the money. If you're going for "tactic-cool" this is all you. If your match, or more iumportantly, your life depends on your tools then do not buy this!
N. prodotto: 100017992 TARAN TACTICAL INNOVATIONS FIREPOWER BASE PAD KIT FOR GLOCK®, FLAT BLACK Parti Fabbricante: GBP940-00 Progettato per darti un vantaggio sulla concorrenza. Design brevettato e collaudato con perno a spinta Si attacca e si stacca rapidamente e facilmente dal tubo del caricatore Non sono necessari strumenti o dispositivi speciali per l'assemblaggio/disassemblaggio Design monopezzo, nessuna piccola parte da tenere d'occhio Si adatta al calibro USPSA 140mm Contiene 20+1 colpi di 40S&W Contiene 23+1 colpi di 9mm Facile da caricare nella pistola con il caricatore completamente carico Aggiunge peso alla base del caricatore per facilitare la caduta dei caricatori e ricariche più rapide Prodotto negli Stati Uniti
99.9CHF0CHF 99.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: GlockModello: 17, 22, 34, 35Tipo: Kit, Base Pad
Design brevettato che consente un'installazione e rimozione rapida senza strumenti.
Compatibile con Glock modelli 17, 22, 34 e 35, aumentando la capacità dei caricatori a 20+1 colpi di 40S&W e 23+1 colpi di 9mm.
Realizzato in alluminio estruso con finitura anodizzata dura per una maggiore durabilità.
Caratteristiche
Adatto per:
Glock
Modello:
17,22,34,35
Tipo:
Base Pad,Kit
Peso della spedizione: 0.181kgAltezza di spedizione: 51mmLarghezza di spedizione: 64mmLunghezza di spedizione: 229mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 100012644 TARAN TACTICAL INNOVATIONS FIREPOWER BASE PAD KIT FOR GLOCK®, BLACK Parti Fabbricante: GBP94001S Progettato per darti un vantaggio sulla concorrenza. Design brevettato e collaudato con perno a spinta Si attacca e si stacca rapidamente e facilmente dal tubo del caricatore Non sono necessari strumenti o dispositivi speciali per l'assemblaggio/disassemblaggio Design monopezzo, nessuna piccola parte da tenere d'occhio Si adatta al calibro USPSA 140mm Contiene 20+1 colpi di 40S&W Contiene 23+1 colpi di 9mm Facile da caricare nella pistola con il caricatore completamente carico Aggiunge peso alla base del caricatore per facilitare la caduta dei caricatori e ricariche più rapide Prodotto negli Stati Uniti
64.9CHF0CHF 64.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: GlockTipo: Base Pads, Molla del caricatore
N. prodotto: 100017994 TARAN TACTICAL INNOVATIONS FIREPOWER BASE PAD KIT FOR GLOCK®, RED Parti Fabbricante: GBP940-03 Progettato per darti un vantaggio sulla concorrenza. Design brevettato e collaudato con perno a spinta Si attacca e si stacca rapidamente e facilmente dal tubo del caricatore Non sono necessari strumenti o dispositivi speciali per l'assemblaggio/disassemblaggio Design monopezzo, nessuna piccola parte da tenere d'occhio Si adatta al calibro USPSA 140mm Contiene 20+1 colpi di 40S&W Contiene 23+1 colpi di 9mm Facile da caricare nella pistola con il caricatore completamente carico Aggiunge peso alla base del caricatore per facilitare la caduta dei caricatori e ricariche più rapide Prodotto negli Stati Uniti
94.9CHF0CHF 94.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: GlockModello: 17, 22, 34, 35Tipo: Kit, Base Pad
N. prodotto: 100017996 TARAN TACTICAL INNOVATIONS FIREPOWER BASE PAD KIT FOR GLOCK®, TITANIUM GRAY Parti Fabbricante: GBP94005S Progettato per darti un vantaggio sulla concorrenza. Design brevettato e collaudato con perno a spinta Si attacca e si stacca rapidamente e facilmente dal tubo del caricatore Non sono necessari strumenti o dispositivi speciali per l'assemblaggio/disassemblaggio Design monopezzo, nessuna piccola parte da tenere d'occhio Si adatta al calibro USPSA 140mm Contiene 20+1 colpi di 40S&W Contiene 23+1 colpi di 9mm Facile da caricare nella pistola con il caricatore completamente carico Aggiunge peso alla base del caricatore per facilitare la caduta dei caricatori e ricariche più rapide Prodotto negli Stati Uniti
Designed to give you the edge over your competition. Patented, proven push-pin design Quickly and easily attaches to and detaches from the magazine tube No specialty tools or devices required for assembly/disassembly One piece design, no small parts to keep track of Fits the USPSA 140mm guage Holds 20+1 rounds of 40S&W Holds 23+1 rounds of 9mm Easy to load into the gun with fully loaded magazine Adds weight to magazine base to help mags drop free easier for faster reloads Made in the USA
SPECS: CNC machined from billet aluminum. Hard Anodized
Altro...
Aumenta la Capacità del Caricatore & Facilita la Caduta del Caricatore
Progettato per darti un vantaggio sulla concorrenza. Design brevettato e collaudato con perno a spinta Si attacca e si stacca rapidamente e facilmente dal tubo del caricatore Non sono necessari strumenti o dispositivi speciali per l'assemblaggio/disassemblaggio Design monopezzo, nessuna piccola parte da tenere d'occhio Si adatta al calibro USPSA 140mm Contiene 20+1 colpi di 40S&W Contiene 23+1 colpi di 9mm Facile da caricare nella pistola con il caricatore completamente carico Aggiunge peso alla base del caricatore per facilitare la caduta dei caricatori e ricariche più rapide Prodotto negli Stati Uniti
SPECIFICHE: lavorato CNC da alluminio estruso. Anodizzato duro
Altro...
Punteggi dei clienti per TARAN TACTICAL INNOVATIONS FIREPOWER BASE PAD KIT FOR GLOCK®, FLAT BLACK
Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 3.3
G17/22 Mags, not G19/23(04.04.2018)
This base pad extension is made for full-size Glock magazines, and will cant Glock 19/23 magazines. The cant can cause malfunctions and/or decrease compacity. The site did not show option for compact or full-size selection, just 9/40 or 45. Luckily, I know someone with an extra base pad for G19 that is going to swap with me. Please offer in the future so other customers do not have the same issue.
Good ideaBUT..(11.09.2013)
Bad if you run a mag well on your glock, the way this secures is by a pin that protrudes up and down which is held in place (barely I might add) by an allen screw and prevents the base pad from sliding back off the mag by using the back of the mag, so this sticks up and hits the magwell first. For 2 more rounds its not worth the chance of this sliding off... I shoot a fair amount of IPSC and 3 gun was hoping for something more solid...
Great Basepads(28.10.2013)
I too am a competitive shooter primarily in USPSA but also compete in 3 gun. I've used the Arredondos previously which are a good design. The TT basepads uses AL vs. plastic (Arredondos) but at the same price. The capacity are the same for the different brands. I use the basepads on a Glock with a Dawson Precision mag well. I have no issues with interference with the retaining pin on the TT basepads. Time will tell how durable the TT basepads are as I just started using them.
Several malfunctions (17.09.2014)
Several malfunctions with this product. I returned the magazines to OEM and the magazines work flawless.
Sold construction for added firepower(14.07.2015)
The other reviews seemed to have issues, so far I have had none. My first try with this +6 base pad was adding it my glock 26 mags. While I needed to use a Glock 17 magazine spring, the product worked flawless and now I have 16+1 in my Glock 26 with the frame length between a G19 and G17 so it is still concealable. I own several more now. Great buy!
Good!(28.01.2016)
I've bought a couple of these and they seem to run fine for me. The construction and the way they attach to the magazine itself is my only complaint. The set screws have stripped out so I have just used the red loctite on the set pin itself and that holds very well. No problem with running these in my Glock in reference to the mag well.
Great Product(16.05.2016)
I read the low reviews and I had to shake my head. Yes, these will not work with some magwells because there are no set standards for a magwell. In terms of malfunctions, I have no experienced any. The included +10% spring works great. What does this base extension do? It adds an extra 6 rounds for your Glock 17 magazines, adds extra weight at the base so it helps ensure the magazine drops away when empty during a reload. I own six of these and they never fail to function. Highly recommend.
Another quality product(06.06.2016)
This is a really solid product. I too have been using Arredondo's for years and quite honestly, never experienced a failure. I saw these displayed at SHOT and was interested. So far after months of hard running these have performed the same, no issues. If installed properly I can't see these ever coming off inadvertently. I check the little set screw pin locker every once in a while, just in case, and it has not budged. A great product made out of AL at the same price point.
Well worth the money(16.07.2017)
I've been running these for a couple years now and they are still as solid as the day I received them. You have to check prior to buying if they are compatible with your magwell. An extra 6 rounds is always appreciated whether you're working the streets or gunning in a competition.
Failure to feed from plus 2 capacity. (04.08.2017)
Have had multiple failures to feed from the spring binding up in the extension. Will replace with tried and true Dawson precision. Wish I had never wasted the money. If you're going for "tactic-cool" this is all you. If your match, or more iumportantly, your life depends on your tools then do not buy this!