Recoil spring tester is a simple testing device that helps you quickly measure the compression strength of any Government-length 1911 recoil spring. Lets you easily check if your gun’s spring is getting weak, and you can identify the weight of any unmarked springs you may have lying around. No more worries about damaging the gun with a weak spring or accidentally installing a soft spring when you want to shoot +P ammunition. Recoil spring tester is compact enough to take to the range; fits easily in tool box or shooting bag.
SPECS: Hard polymer with steel components. Instructions included. Measures springs up to 26 lbs. spring weight. 2 AAA batteries which are required, are not included.
Altro...
Il tester per molle di rinculo è un dispositivo di test semplice che ti aiuta a misurare rapidamente la forza di compressione di qualsiasi molla di rinculo di lunghezza governativa 1911. Ti consente di controllare facilmente se la molla della tua pistola si sta indebolendo e puoi identificare il peso di eventuali molle non contrassegnate che potresti avere in giro. Non dovrai più preoccuparti di danneggiare la pistola con una molla debole o di installare accidentalmente una molla morbida quando desideri sparare munizioni +P. Il tester per molle di rinculo è abbastanza compatto da portare al poligono; si adatta facilmente nella cassetta degli attrezzi o nella borsa da tiro.
SPECIFICHE: Polimero duro con componenti in acciaio. Istruzioni incluse. Misura molle fino a 26 lbs. il peso della molla. 2 batterie AAA necessarie, non incluse.
Altro...
Punteggi dei clienti per SECURE FIREARM PRODUCTS GOV'T LENGTH 1911 RECOIL SPRING TESTER
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 3.3
Don't waste your money(12.09.2013)
Tester is only good to measure gov't model recoil spring tensions. There is only 1 witness mark to show 1.625" compression on the tube. Per Wolf Springs, spring commpression needs to be a mark at 1.625" for gov't models, another at 1.125" for commanders, and another at .700" for O.M.
If you try to use the current witness mark, a new 18# commander spring only weighs about 13#
Also the adapter is totaly useless. Instructions say test other springs (main / hammer springs) by pulling to current witness mark. The scale shows 6 brand new 23# hammer springs only weighing 12#
I called the manufacturer and explained the problems. I'm returning my unit
This may explain better what I'm talking about. http://www.calguns.net/calgunforum/showthread.php?t=204458&highlight=recoil+spring+tester
Great Product, Helped me alot(26.11.2013)
This was a great help in sorting out my springs. When I needed to test main springs I determined the proper compressed length and put a piece of tape on the barrel using the 1.625 line as a reference. Worked Great. I even tested some Govt. Recoil springs that were brand new and they tested within 1/2 lb. of where they were supposed to be.
I do understand that this is not a super precision spring checker and if a person needs that kind of accuracy then a high dollar spring tool can be purchased from an industrial supply house. However, they are very pricey and usually run more that the cost of a new gun.
Simple and works well(27.10.2015)
I tested all my 1911 recoil springs, including spares, and all of the springs for my friend's 1911s in about two hours, including disassembly and reassembly.
Easy to use, repeatable, and you can read spring compression within a tenth of a pound.
I would recommend this product for its intended use ... Government-length recoil springs.
Good idea... but...(05.09.2016)
Good idea !
Easy to use and to determine the length to be measure for each pistol.
I checked different kind of recoil springs and systematically had a difference of approximately two to three pounds (less) when compared with supposedly Wolff calibrated springs or manufacture calibrated springs.
N. prodotto: 100011593 SECURE FIREARM PRODUCTS GOV'T LENGTH 1911 RECOIL SPRING TESTER Parti Fabbricante: 11490-SR-D Il tester per molle di rinculo è un dispositivo di test semplice che ti aiuta a misurare rapidamente la forza di compressione di qualsiasi molla di rinculo di lunghezza governativa 1911. Ti consente di controllare facilmente se la molla della tua pistola si sta indebolendo e puoi identificare il peso di eventuali molle non contrassegnate che potresti avere in giro. Non dovrai più preoccuparti di danneggiare la pistola con una molla debole o di installare accidentalmente una molla morbida quando desideri sparare munizioni +P. Il tester per molle di rinculo è abbastanza compatto da portare al poligono; si adatta facilmente nella cassetta degli attrezzi o nella borsa da tiro.
79.9CHF3CHF 79.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Dispositivo semplice per misurare la forza di compressione delle molle di rinculo per 1911 di lunghezza Governativa.
Permette di verificare se la molla sta perdendo forza e identificare il peso di molle non contrassegnate.
Compatto e facile da trasportare, si adatta nella cassetta degli attrezzi o nella borsa da tiro.
Caratteristiche
Peso della spedizione: 0.181kgAltezza di spedizione: 25mmLarghezza di spedizione: 135mmLunghezza di spedizione: 254mm
Dettagli dell'elemento
Made in Usa
Misura la forza delle molle di rinculo della tua 1911 con il nostro tester compatto 🔧. Controlla la sicurezza della tua pistola e migliora le tue prestazioni!
Recoil spring tester is a simple testing device that helps you quickly measure the compression strength of any Government-length 1911 recoil spring. Lets you easily check if your gun’s spring is getting weak, and you can identify the weight of any unmarked springs you may have lying around. No more worries about damaging the gun with a weak spring or accidentally installing a soft spring when you want to shoot +P ammunition. Recoil spring tester is compact enough to take to the range; fits easily in tool box or shooting bag.
SPECS: Hard polymer with steel components. Instructions included. Measures springs up to 26 lbs. spring weight. 2 AAA batteries which are required, are not included.
Altro...
Il tester per molle di rinculo è un dispositivo di test semplice che ti aiuta a misurare rapidamente la forza di compressione di qualsiasi molla di rinculo di lunghezza governativa 1911. Ti consente di controllare facilmente se la molla della tua pistola si sta indebolendo e puoi identificare il peso di eventuali molle non contrassegnate che potresti avere in giro. Non dovrai più preoccuparti di danneggiare la pistola con una molla debole o di installare accidentalmente una molla morbida quando desideri sparare munizioni +P. Il tester per molle di rinculo è abbastanza compatto da portare al poligono; si adatta facilmente nella cassetta degli attrezzi o nella borsa da tiro.
SPECIFICHE: Polimero duro con componenti in acciaio. Istruzioni incluse. Misura molle fino a 26 lbs. il peso della molla. 2 batterie AAA necessarie, non incluse.
Altro...
Punteggi dei clienti per SECURE FIREARM PRODUCTS GOV'T LENGTH 1911 RECOIL SPRING TESTER
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 3.3
Don't waste your money(12.09.2013)
Tester is only good to measure gov't model recoil spring tensions. There is only 1 witness mark to show 1.625" compression on the tube. Per Wolf Springs, spring commpression needs to be a mark at 1.625" for gov't models, another at 1.125" for commanders, and another at .700" for O.M.
If you try to use the current witness mark, a new 18# commander spring only weighs about 13#
Also the adapter is totaly useless. Instructions say test other springs (main / hammer springs) by pulling to current witness mark. The scale shows 6 brand new 23# hammer springs only weighing 12#
I called the manufacturer and explained the problems. I'm returning my unit
This may explain better what I'm talking about. http://www.calguns.net/calgunforum/showthread.php?t=204458&highlight=recoil+spring+tester
Great Product, Helped me alot(26.11.2013)
This was a great help in sorting out my springs. When I needed to test main springs I determined the proper compressed length and put a piece of tape on the barrel using the 1.625 line as a reference. Worked Great. I even tested some Govt. Recoil springs that were brand new and they tested within 1/2 lb. of where they were supposed to be.
I do understand that this is not a super precision spring checker and if a person needs that kind of accuracy then a high dollar spring tool can be purchased from an industrial supply house. However, they are very pricey and usually run more that the cost of a new gun.
Simple and works well(27.10.2015)
I tested all my 1911 recoil springs, including spares, and all of the springs for my friend's 1911s in about two hours, including disassembly and reassembly.
Easy to use, repeatable, and you can read spring compression within a tenth of a pound.
I would recommend this product for its intended use ... Government-length recoil springs.
Good idea... but...(05.09.2016)
Good idea !
Easy to use and to determine the length to be measure for each pistol.
I checked different kind of recoil springs and systematically had a difference of approximately two to three pounds (less) when compared with supposedly Wolff calibrated springs or manufacture calibrated springs.