Convenient, Easy To Carry, Take To The Range, Use On The Bench
Never get caught without essential gunsmithing tools again. Complete 17-piece tool set, in a handy, padded, vinyl case, carries easily to the range; lies flat on the bench. Contains the tools you need for quick field repairs: eight, fixed blade screwdrivers with parallel ground tips fit most gun screws; eight, non-marring brass pin punches and an 8 ounce brass hammer help provide safe removal and installation of the most commonly found assembly pins.
SPECS: Case - vinyl, black. 81/2" (21.6cm) x 11" (28cm). Hammer - 8 oz. (226 g), 1" (2.5cm) dia. x 2" (5.1cm) long head, 91/4" (23.5cm) hickory handle. Punches - brass, 5/16" hex stock, parallel shaft. 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" and 5/16" dia. Screwdrivers - square shanks hardened to Rc 52-56. 4" to 9" lengths. Hardwood handle.
Plus...
Pratique, Facile à Transporter, À Emporter au Stand, À Utiliser sur le Banc
Ne reste jamais sans les outils essentiels de gunsmithing. Ensemble complet d'outils de 17 pièces, dans un étui en vinyle rembourré, facile à transporter au stand ; se pose à plat sur le banc. Contient les outils nécessaires pour des réparations rapides sur le terrain : huit tournevis à lame fixe avec des pointes parallèles s'adaptent à la plupart des vis de fusil ; huit poinçons en laiton non marquants et un marteau en laiton de 226 g aident à retirer et installer en toute sécurité les goupilles d'assemblage les plus couramment trouvées.
SPÉCIFICATIONS : Étui - vinyle, noir. 21,6 cm x 28 cm. Marteau - 226 g, tête de 2,5 cm de diamètre x 5,1 cm de long, manche en hickory de 23,5 cm. Poinçons - laiton, tige hexagonale de 5/16", arbre parallèle. 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" et 5/16" de diamètre. Tournevis - tiges carrées durcies à Rc 52-56. Longueurs de 10,2 cm à 22,9 cm. Poignée en bois dur.
Plus...
Évaluations client de GRACE USA GUN CARE TOOL SET
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 5
Great Set(09.07.2014)
This is a great set of screw drivers and punches. Defiantly a bit "old school" with the wooden handles with excellent machining (not cast as many cheap imitations are) on the tips. All the punches are polished to a shiny finish and the punch size is marked on each. Also includes some of the smaller punch sizes (use with discretion as these are brass and will bend) which are a bit hard to find especially in brass. As an added bonus for those so inclined you can purchase the wooden handled Glock pin punch from the same manufacturer and sold by Sinclair. There is room for it to fit in the case. Nice quality case included along with the well constructed brass hammer. The only down side to it is that it look so nice I can't decide if I should use it or not! Great gift idea too.
Careful choice of tools takes care of yo(01.04.2015)
For my Favorites, My Cowboy Toys an awesome set. It has all the basic tools for my Munden built Smoke Wagons.
Référence: 354100017 GRACE USA GUN CARE TOOL SET Ref Fabricant: GCT-17731940999177 Ne reste jamais sans les outils essentiels de gunsmithing. Ensemble complet d'outils de 17 pièces, dans un étui en vinyle rembourré, facile à transporter au stand ; se pose à plat sur le banc. Contient les outils nécessaires pour des réparations rapides sur le terrain : huit tournevis à lame fixe avec des pointes parallèles s'adaptent à la plupart des vis de fusil ; huit poinçons en laiton non marquants et un marteau en laiton de 226 g aident à retirer et installer en toute sécurité les goupilles d'assemblage les plus couramment trouvées.
204.9CHF9CHF 204.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Manufacture: Universel Arme de Poing
Convenient, Easy To Carry, Take To The Range, Use On The Bench
Never get caught without essential gunsmithing tools again. Complete 17-piece tool set, in a handy, padded, vinyl case, carries easily to the range; lies flat on the bench. Contains the tools you need for quick field repairs: eight, fixed blade screwdrivers with parallel ground tips fit most gun screws; eight, non-marring brass pin punches and an 8 ounce brass hammer help provide safe removal and installation of the most commonly found assembly pins.
SPECS: Case - vinyl, black. 81/2" (21.6cm) x 11" (28cm). Hammer - 8 oz. (226 g), 1" (2.5cm) dia. x 2" (5.1cm) long head, 91/4" (23.5cm) hickory handle. Punches - brass, 5/16" hex stock, parallel shaft. 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" and 5/16" dia. Screwdrivers - square shanks hardened to Rc 52-56. 4" to 9" lengths. Hardwood handle.
Plus...
Pratique, Facile à Transporter, À Emporter au Stand, À Utiliser sur le Banc
Ne reste jamais sans les outils essentiels de gunsmithing. Ensemble complet d'outils de 17 pièces, dans un étui en vinyle rembourré, facile à transporter au stand ; se pose à plat sur le banc. Contient les outils nécessaires pour des réparations rapides sur le terrain : huit tournevis à lame fixe avec des pointes parallèles s'adaptent à la plupart des vis de fusil ; huit poinçons en laiton non marquants et un marteau en laiton de 226 g aident à retirer et installer en toute sécurité les goupilles d'assemblage les plus couramment trouvées.
SPÉCIFICATIONS : Étui - vinyle, noir. 21,6 cm x 28 cm. Marteau - 226 g, tête de 2,5 cm de diamètre x 5,1 cm de long, manche en hickory de 23,5 cm. Poinçons - laiton, tige hexagonale de 5/16", arbre parallèle. 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" et 5/16" de diamètre. Tournevis - tiges carrées durcies à Rc 52-56. Longueurs de 10,2 cm à 22,9 cm. Poignée en bois dur.
Plus...
Évaluations client de GRACE USA GUN CARE TOOL SET
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 5
Great Set(09.07.2014)
This is a great set of screw drivers and punches. Defiantly a bit "old school" with the wooden handles with excellent machining (not cast as many cheap imitations are) on the tips. All the punches are polished to a shiny finish and the punch size is marked on each. Also includes some of the smaller punch sizes (use with discretion as these are brass and will bend) which are a bit hard to find especially in brass. As an added bonus for those so inclined you can purchase the wooden handled Glock pin punch from the same manufacturer and sold by Sinclair. There is room for it to fit in the case. Nice quality case included along with the well constructed brass hammer. The only down side to it is that it look so nice I can't decide if I should use it or not! Great gift idea too.
Careful choice of tools takes care of yo(01.04.2015)
For my Favorites, My Cowboy Toys an awesome set. It has all the basic tools for my Munden built Smoke Wagons.