For Any Part That Needs A Little More "Bite" Cut, peel, and stick to handgun grips, bull barrels, rifle or shotgun stock forearms and butt plates for a better grip.
SPECS: Black only. Medium and Heavy texture. Two sizes: 1" (2.5cm) W. x 12" (30.4cm) L., 12 pieces per pkg.; 2" (5.1cm) W. x 12" (30.4cm) L., 6 pieces per pkg. Assortment has 18 pieces: 6 ea., 1"x2", Med. and Heavy; 3 ea., 2"x12", Med. and Heavy.
Plus...
Pour toute pièce qui a besoin d'un peu plus de "mordant"
Pour toute pièce qui a besoin d'un peu plus de "mordant". Découpe, pèle et colle sur les poignées de pistolet, les canons bull, les crosses de fusil ou de fusil à pompe et les plaques de crosse pour une meilleure prise.
SPECIFICATIONS : Noir seulement. Texture moyenne et épaisse. Deux tailles : 1" (2,5 cm) L. x 12" (30,4 cm) L., 12 pièces par paquet ; 2" (5,1 cm) L. x 12" (30,4 cm) L., 6 pièces par paquet. Assortiment comprend 18 pièces : 6 de chaque, 1"x2", moyenne et épaisse ; 3 de chaque, 2"x12", moyenne et épaisse.
Plus...
Évaluations client de BROWNELLS MEDIUM "INSTA-GRIP" TAPE 2"X12" 6 PIECES
Nombre d'évaluations: 5
De brownells.com: 5
Note moyenne: 3.8
A needed item in your bag of tricks!(06.06.2017)
I'm not a fan of "skateboard tape" but am open minded. I have had mixed results with different brands and cuts. You can't go wrong with this. It holds up and works, and is a good temporary or permanent solution to checkering (may need changed at some point). This is long lasting and holds up to cleaning. Price vs value = get extra and play with it!
Very aggressive texture(17.12.2010)
I use this tape for the front strap of my 1911. I cut a piece so that extends under the grips and when the grips are screwed down it definitly will not come off when you don't want it to. However I switched to the medium texture tape because after a lot of .45ACP rounds down range my fingers were raw. They should offer a package with both textures in it.
Great stuff(14.05.2010)
I ordered this hoping to add a little stick to my grips & slides. I was not disappointed this product performs as advertised. Sticks well and removes easily, greatly improves grip. I have an XD40 sub-compact that can be slick and a bit difficult to rack at times but adding just a small strip to the front & rear of the slide eliminated that completely. Grip is greatly improved resulting in quicker follow up shots. I've actually put it on other items as well - fishing pliers that are slick when wet. Great product.
Needs better adhesive(27.01.2012)
Got this to put on polymer pistol grips. My issue with these grip strips is the lack of good adhesion. Modern adhesives are better than ever and there is no excuse for the weak mixture of adhesive used on this product. Proper surface degreasing prep was done, and this grip tape still failed to adhere with any strength. The strips don't stick well with the very minimum of usage. After any real life usage such as sliding in and out of concealed waistband holsters and exposure to body heat, the adhesive on this product will give up and the tape will dislodge. I'd rather have a strong adhesive and cut grip tape to fit before attaching it than weak adhesive that renders the whole process a waste of time. Evidently the manufacturer of this grip tape was more concerned about negative responses from consumers who fail to install properly and are not aware of advanced adhesive removers out there that will not harm polymer surfaces than making a serious grip tape product.
VERY aggressive - it's anti-slip tape!(08.02.2018)
On a plus note, you get a lot for your money - enough to do a half-dozen pistols and slides!
I'm bummed: this is exactly anti-slip tape you put on stairs or other smooth surfaces to keep from slipping!
(aka "skateboard grip tape") I guess there are rougher 'grits' available, and this feels almost - but not quite - like 120 grit wet/dry.
Unlike my Kershaw "Blur" (for example) which has panels of a textured rubbery material like a ground up Kraton, this stuff will abrade skin off!
I don't see how you could holster a pistol after putting it on a slide?
I bought this primarily for my large CRKT Crawford-Kasper knife, and to try on my Gen 1 model 19. It will be VERY difficult to pull my knife out of the pants pocket with this on! It would work for a bench top tool, not a carry knife...
I may try it on the Glock, but worry that if my initial grasp is off, re-positioning will be next to impossible!
Référence: 084093106 BROWNELLS MEDIUM "INSTA-GRIP" TAPE 2"X12" 6 PIECES Ref Fabricant: 3100050806026407 Pour toute pièce qui a besoin d'un peu plus de "mordant". Découpe, pèle et colle sur les poignées de pistolet, les canons bull, les crosses de fusil ou de fusil à pompe et les plaques de crosse pour une meilleure prise.
41.9CHF0CHF 41.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Référence: 084093112 BROWNELLS MEDIUM "INSTA-GRIP" TAPE 1"X12" 12 PIECES050806026421 Pour toute pièce qui a besoin d'un peu plus de "mordant". Découpe, pèle et colle sur les poignées de pistolet, les canons bull, les crosses de fusil ou de fusil à pompe et les plaques de crosse pour une meilleure prise.
39.9CHF1CHF 39.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
For Any Part That Needs A Little More "Bite" Cut, peel, and stick to handgun grips, bull barrels, rifle or shotgun stock forearms and butt plates for a better grip.
SPECS: Black only. Medium and Heavy texture. Two sizes: 1" (2.5cm) W. x 12" (30.4cm) L., 12 pieces per pkg.; 2" (5.1cm) W. x 12" (30.4cm) L., 6 pieces per pkg. Assortment has 18 pieces: 6 ea., 1"x2", Med. and Heavy; 3 ea., 2"x12", Med. and Heavy.
Plus...
Pour toute pièce qui a besoin d'un peu plus de "mordant"
Pour toute pièce qui a besoin d'un peu plus de "mordant". Découpe, pèle et colle sur les poignées de pistolet, les canons bull, les crosses de fusil ou de fusil à pompe et les plaques de crosse pour une meilleure prise.
SPECIFICATIONS : Noir seulement. Texture moyenne et épaisse. Deux tailles : 1" (2,5 cm) L. x 12" (30,4 cm) L., 12 pièces par paquet ; 2" (5,1 cm) L. x 12" (30,4 cm) L., 6 pièces par paquet. Assortiment comprend 18 pièces : 6 de chaque, 1"x2", moyenne et épaisse ; 3 de chaque, 2"x12", moyenne et épaisse.
Plus...
Évaluations client de BROWNELLS MEDIUM "INSTA-GRIP" TAPE 2"X12" 6 PIECES
Nombre d'évaluations: 5
De brownells.com: 5
Note moyenne: 3.8
A needed item in your bag of tricks!(06.06.2017)
I'm not a fan of "skateboard tape" but am open minded. I have had mixed results with different brands and cuts. You can't go wrong with this. It holds up and works, and is a good temporary or permanent solution to checkering (may need changed at some point). This is long lasting and holds up to cleaning. Price vs value = get extra and play with it!
Very aggressive texture(17.12.2010)
I use this tape for the front strap of my 1911. I cut a piece so that extends under the grips and when the grips are screwed down it definitly will not come off when you don't want it to. However I switched to the medium texture tape because after a lot of .45ACP rounds down range my fingers were raw. They should offer a package with both textures in it.
Great stuff(14.05.2010)
I ordered this hoping to add a little stick to my grips & slides. I was not disappointed this product performs as advertised. Sticks well and removes easily, greatly improves grip. I have an XD40 sub-compact that can be slick and a bit difficult to rack at times but adding just a small strip to the front & rear of the slide eliminated that completely. Grip is greatly improved resulting in quicker follow up shots. I've actually put it on other items as well - fishing pliers that are slick when wet. Great product.
Needs better adhesive(27.01.2012)
Got this to put on polymer pistol grips. My issue with these grip strips is the lack of good adhesion. Modern adhesives are better than ever and there is no excuse for the weak mixture of adhesive used on this product. Proper surface degreasing prep was done, and this grip tape still failed to adhere with any strength. The strips don't stick well with the very minimum of usage. After any real life usage such as sliding in and out of concealed waistband holsters and exposure to body heat, the adhesive on this product will give up and the tape will dislodge. I'd rather have a strong adhesive and cut grip tape to fit before attaching it than weak adhesive that renders the whole process a waste of time. Evidently the manufacturer of this grip tape was more concerned about negative responses from consumers who fail to install properly and are not aware of advanced adhesive removers out there that will not harm polymer surfaces than making a serious grip tape product.
VERY aggressive - it's anti-slip tape!(08.02.2018)
On a plus note, you get a lot for your money - enough to do a half-dozen pistols and slides!
I'm bummed: this is exactly anti-slip tape you put on stairs or other smooth surfaces to keep from slipping!
(aka "skateboard grip tape") I guess there are rougher 'grits' available, and this feels almost - but not quite - like 120 grit wet/dry.
Unlike my Kershaw "Blur" (for example) which has panels of a textured rubbery material like a ground up Kraton, this stuff will abrade skin off!
I don't see how you could holster a pistol after putting it on a slide?
I bought this primarily for my large CRKT Crawford-Kasper knife, and to try on my Gen 1 model 19. It will be VERY difficult to pull my knife out of the pants pocket with this on! It would work for a bench top tool, not a carry knife...
I may try it on the Glock, but worry that if my initial grasp is off, re-positioning will be next to impossible!