Le kit réduit le poids de la détente de 12 lbs à 9 lbs pour un tir plus facile.
Pas besoin d'ajuster ou de modifier les ressorts ou pièces d'origine, l'installation est simple.
Compatible avec tous les revolvers J-frame modernes à percussion centrale.
Caractéristiques
Poids du colis:0.007kg
Largeur d'expédition:83mm
Longueur d'expédition:146mm
UPC:856008005260
Détails de l'article
Fabriqué au USA
US export classification: 0A501.x
54.954.91CHF
54.9CHFCHF 54.90
Le prix inclut la TVA mais pas la livraison .
Référence: 100007219
N° fabr.: 103-106
856008005260 L'installation de ce kit réduit le poids de la détente de votre revolver Smith & Wesson J-frame à percussion centrale de plus de 12 lbs à 9 lbs. Le kit contient un nouveau ressort de glissière de rebond, un ressort principal et un kit de percuteur Apex XP. L'installation ne nécessite aucun ajustement ou modification des ressorts ou pièces d'origine. Il suffit de retirer les pièces d'origine et d'installer le kit J-frame duty/carry. Compatible avec tous les revolvers J-frame modernes à percussion centrale dotés d'un percuteur monté sur le cadre.
En stock
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Installation of this kit reduces trigger pull weight of your centerfire J-frame Smith & Wesson revolver from over 12 lbs to 9 lbs Kit contains a new rebound slide spring, main spring, and an Apex XP firing pin kit Installation requires no fitting or modification to the factory springs or parts Just remove the factory parts and install the j-frame duty/carry kit Works with all modern centerfire J-frame revolvers with the frame mounted firing pin
L'installation de ce kit réduit le poids de la détente de votre revolver Smith & Wesson J-frame à percussion centrale de plus de 12 lbs à 9 lbs. Le kit contient un nouveau ressort de glissière de rebond, un ressort principal et un kit de percuteur Apex XP. L'installation ne nécessite aucun ajustement ou modification des ressorts ou pièces d'origine. Il suffit de retirer les pièces d'origine et d'installer le kit J-frame duty/carry. Compatible avec tous les revolvers J-frame modernes à percussion centrale dotés d'un percuteur monté sur le cadre.
Points forts
Le kit réduit le poids de la détente de 12 lbs à 9 lbs pour un tir plus facile.
Pas besoin d'ajuster ou de modifier les ressorts ou pièces d'origine, l'installation est simple.
Compatible avec tous les revolvers J-frame modernes à percussion centrale.
Caractéristiques
Poids du colis:0.007kg
Largeur d'expédition:83mm
Longueur d'expédition:146mm
UPC:856008005260
Détails de l'article
Fabriqué au USA
US export classification: 0A501.x
Avis des clients
Notes des clients (9)
4.2 / 5
Non recommandé
.333 Batting Average 04.09.2016
Bought the spring kit for my new S&W 442. I channeled my inner armorer since being out of the army for nearly 19 years. After installing the new springs, I went to the range to test it out. I had 4 misfires in the first box of 50 cartridges that I shot through it, and the trigger would not return on it's own after being shot. I talked to S&W, who gladly mailed me new OEM main and rebound springs after I unsuccessfully tried to find my originals. Looks like I will be developing a stronger trigger finger.
Fortement recommandé
S&W 638 Installation and Performance 26.07.2014
In all honesty, I was a bit nervous about installing this kit, having never done any trigger work. APEX provided great videos as well as another Youtube video from Terry G titled "S&W Airweight Trigger Job: "The Yoda G Mod". I used APEX's videos for their kit, but I went a bit farther as the Yoda G Mod teaches how to completely dissassemble, remove the cylinder lock, what surfaces can use polishing and which ones not to touch. Replacing the springs is only 2/3 the job, in my opinion. Polishing most of the contact or "friction point" surfaces inside really make a huge difference also and are not hard- took me less than an hour to do the whole install, and that was using the two Apex Youtube videos and the Yoda video. Only issue I had was a small pin fell out in the area of the trigger guard upon complete dissasembly, and it was difficult from the video to tell excactly where that pin went. I found an exploded parts drawing on the internet and it saved the day. No left over parts. I would say double action pull, without using a gauge, decreased from a very hard 12-14 to a much more manageable 8 or so. Again this is subjective as I have no trigger pull gauge, but it is definitely much lighter. The 638 also has single action capability, and it seems to break about 2.5 - 3 lbs. Save yourself some money and buy the kit. A job like I did with the polishing and parts replacement would easily cost $150 or more. Just follow the instructions "exactly" as getting the side-plate off the way they describe is critical as is using the proper size screwdrivers. One tool they recommend for installing a spring, I didn't have, but it was no issue whatsoever. I am not a mechanic, by any means, but probably have average mechanical aptitude. If I can do this, you can do this. God Bless and have a great day!
Fortement recommandé
Amazing difference! 06.03.2014
Amazing difference in trigger pull weight and smoothness. Didn't measure with a trigger scale, but a very noticeable change. Watch their video, use the right tools, and it is very easy to swap out. Take the time to polish the rebound slide back and bottom while its out, as well. Compared my gun with springs to an identical 637 without and the difference is amazing. Student in my CCW class could not easily nor accurately pull double action with her 637 but she was able to fire mine very accurately and quickly. She asked about the difference right away and for someone not experienced in firearms to comment speaks volumes. Excellent investment for the money!
Fortement recommandé
Excellent Kit for the money 04.07.2012
Have installed many of these kits on customer revolvers. I have not had anyone yet that wasn't estatic over the improvement. Very smooth action afterwards. I have had to lightly polish a couple of the firing pins but other than that.... perfect installations.
Fortement recommandé
Easy installation w/ great results 22.01.2012
I purchased this kit for a new S&W 60 based on reviews from other users. Following the company's instructional videos on YouTube, I was able to easily do the installation by myself and avoided mistakes that I would have otherwise made. I'm very pleased with the lighter pull and highly recommend the product to all. It was well worth the money!
Fortement recommandé
Excellent Upgrade 07.12.2011
Have installed a half dozen or so of these to date. About to order 3 more. Customers are astounded at the difference it makes. Easy install and huge improvement.
Recommandé
Apex Tactical J-Frame Spring Kit 02.12.2011
I purchased this as a hopeful fix for my wife's Airweight J-Frame. She was complaining that the factory trigger was too heavy and hurt her finger when she shot. Had to dress the end of one of the springs as it did not have the flat pressed end - was just clipped off, but this was easily fixed in 15 seconds with a torch and pliers. There was a significant and improved difference in trigger weight, and cycling the action is much faster on repetitive shots. I would like to see a lighter version, possibly 5-7 pound kit, as this firearm does not have a safety device that is spring reliant. In all, great kit. I just ordered another two: one for mine, and one for a friend that is becoming envious...
Fortement recommandé
Does make it smoother 27.10.2011
Installed it on my new wife's S&W 642CT, no much lighter but did make it smoother. Do watch the video first and if you have one of the S&W trigger spring tools, makes life much easier. I have one and took maybe 20 mins for the total install. Have a S&W 637 with Wolf springs and plan to swap out for Apex J kit.
Recommandé, avec réserves
Decent 01.09.2011
Installed easily into my well used 637. Reduced trigger pull a little bit but definitely not a night and day difference. Can't really go much lower though to insure reliable ignition of hard primers. The machined firing pin is a nice addition. Overall, you don't have to sacrifice much time or money to install this kit into your j-frame so it is worthwhile but I wouldn't call it a "must buy."
Nous avons rencontré une erreur lors du chargement de ce contenu. Veuillez actualiser la page pour continuer. Si le problème persiste, contactez notre service client.
Améliorez votre S&W J-frame avec le J-FRAME DUTY/CARRY KIT 🚀. Réduisez la détente à 9 lbs sans modifications. Facile à installer!
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Des vis usinées avec précision et traitées thermiquement pour un bedding optimal des actions de fusil Remington.
Environ .250" plus longues que les vis d'origine, offrant plus de flexibilité dans la profondeur du bedding.
Kits disponibles avec tête fendue standard ou douilles Allen pour des réglages de couple répétables.
L'aide au chargement Nine Reloaded permet un chargement rapide et facile des chargeurs 9x19mm.
Compatible avec une variété de chargeurs grâce à la pièce d'adaptateur interchangeable (vendue séparément).
Idéal pour remplir rapidement des paquets de 50 cartouches ou des cartouches en vrac.
Le système d'alimentation des balles Lee fonctionne uniquement avec les calibres de pistolet.
Le kit inclut tout le nécessaire : tube d'alimentation, support, matériel, die d'alimentation et doigts.
Les PRO 1000 fabriqués avant 1992 nécessitent une nouvelle unité de transport de douille.
Aide et contact
Newsletter
Vue classique
Vue mobile