KG PRODUCTS
KG2 BORE POLISH

695134006020 665000006

Essential Cleaner & Protectant Extends Firearm Life & Improves Function

Mild abrasive gently polishes the bore clean, but leaves embedded copper in the steel s micro fractures as recommended by top barrel makers. Proper use leaves your prized bore even smoother than before and eliminates the need for fouling shots. All KG liquids include a convenient twist-open, pinpoint applicator spout with snap-top cap to help prevent spills and conserve product.

SPECS: Liquid, 4 fl. oz. (118ml).

Altro...

Detergente Essenziale & Protettivo Estende la Vita dell'Arma & Migliora la Funzione

Un abrasivo delicato lucida gentilmente il foro, ma lascia il rame incorporato nelle micro fratture dell'acciaio come raccomandato dai migliori produttori di canne. Un uso corretto rende il tuo prezioso foro ancora più liscio di prima ed elimina la necessità di tiri di assestamento. Tutti i liquidi KG includono un pratico beccuccio applicatore a twist con cappuccio a scatto per aiutare a prevenire fuoriuscite e conservare il prodotto.

SPECS: Liquido, 4 fl. oz. (118ml).

Altro...

Punteggi dei clienti per KG PRODUCTS KG2 BORE POLISH 4OZ

Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 3.5

Use CAUTION (08.03.2012)

This stuff can't be removed with patches & solvents/oils or brush & solvent! I used 60 patches and couldn't get it all out. Groups on my favorite Model 9422M opened up to 18" at 50 yards. It might take a full can of blaster aerosol to flush this sludge out of a barrel!I'm one real sick puppy over this stuff. I suggest using JB Bore Compound instead, as per instructions.

Top Shelf like other KG products (27.03.2012)

Have been using this on a NIB S&W 629 with excellent results. KG4 works as advertised. For me it quickly cleans out leading in the 44's bore resulting from testing various cast bullet loads. I have carefully observed it's bore polishing capability and can report that over about 2 weeks of use visual and tactile inspection reveal the bore of the 629 to be smoother than when I took it new out of the box. The result is that leading/fouling does not adhere so tenaciously to the bore. I cannot speak to increased accuracy as with my aging eyes I'm a utilitarian shot with open sights. Unlike another reviewer's experience, I have had no problem getting excess KG2 out of the bore when finished using it by following instructions on the bottle. This is not a cleaner which also lubes as it's used; when finished the bore needs a very light coat of protectant/lube (I use Cleanzoil). I always fire a fouling shot as soon as possible after cleaning anyway... Like all the KG line of gun care products, KG2 is absolutely top shelf...

Outstanding bore cleaner/polish (27.08.2012)

KG-2 is simply the best bore cleaner and polish that I have ever used. I usually run a nylon brush of KG-1 carbon remover through the bore a few times, then a patch or two to clean that out. I follow that with a few passes of KG-12 big bore cleaner on a nylon bush to eliminate copper, punching through a few patches to clean that. Lastly, I run KG-2 bore polish through the bore with a few passes on a nylon brush, then a copper brush. I spray out the bore with KG-3, soak a few patches with same and run them through. It usually only takes two patches to remove any signs of KG-2 residue. I have no idea why JamesD cannot seem to clean this out and easily at that. Use this product (with some KG-3) followed by WeaponShield oil without reservation and you will be more than pleased.

Suspension solvents break down over time (25.08.2016)

I've used KG products for a long time.

Unfortunately, I didn't get much use out of a bottle of KG2 because the suspension separated out, and the solvent evaporated or broke down over time.

So, I had to shake the bottle like mad to get the dark grey paste to mix back into a suspension, and even after that, within a day or two, the grey paste had sunk back to the bottom of the bottle.

The sludge got thicker and thicker until it basically could not be dislodged from the bottom of the bottle.

KG was pretty good about offering to replace the bottle for free, but I realized that it would just separate out again on me and end up being wasted. Without some way to prolong the life of the solvent such as freezing it or putting it in the fridge, etc., it would be a waste.

I figure they should repackage KG2 in tiny, sealed/airtight one-time applicator squeeze tubes OR sell the stuff as a paste (like lapping compound) that can be re-dissolved when the solvent evaporates.

Leggi più recensioni su brownells.com

23.9 23.9 1 CHF

N. prodotto: 665000006
KG PRODUCTS KG2 BORE POLISH 4OZ 695134006020 Un abrasivo delicato lucida gentilmente il foro, ma lascia il rame incorporato nelle micro fratture dell'acciaio come raccomandato dai migliori produttori di canne. Un uso corretto rende il tuo prezioso foro ancora più liscio di prima ed elimina la necessità di tiri di assestamento. Tutti i liquidi KG includono un pratico beccuccio applicatore a twist con cappuccio a scatto per aiutare a prevenire fuoriuscite e conservare il prodotto.

23.9 CHF 40 CHF 23.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Dimensioni: 4 oz

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Un abrasivo delicato che lucida il tubo senza danneggiarlo.
Contiene rame per migliorare la finitura delle micro fratture dell'acciaio.
Include un beccuccio applicatore a punta e un tappo a scatto per prevenire fuoriuscite.

Caratteristiche

Dimensioni: 4 oz Peso della spedizione: 0.136kg Altezza di spedizione: 163mm Larghezza di spedizione: 41mm Lunghezza di spedizione: 43mm UPC : 695134006020