Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 399 CHF

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

FULTON ARMORY
M14/M1A SIMULATED FULL-AUTO SELECTOR LEVER

100005279

Fills the Gap In The Stock & Gives A Semi-Auto Rifle A "Full-Auto" Look

One-piece simulated selector lever made of Parkerized steel fits in the selector lever cutout in USGI and aftermarket M14 stocks to give your rifle the authentic appearance of a full-auto capable GI M14. Fills the unsightly gap and helps keep dirt and debris out of the action. Rotates to semi- or full-auto position. Installs on the stock, not the receiver perfectly legal.

SPECS: Steel, Parkerized, matte black. Fits USGI and aftermarket M14 rifle stocks with selector lever cutout. Mounting hardware included. Minor fitting required.

Plus...

Comble le Vide Dans La Crosse & Donne À Un Fusil Semi-Automatique Un Aspect "Automatique"

Le sélecteur simulé en une pièce, fabriqué en acier parkérisé, s'insère dans la découpe pour le sélecteur des crosses USGI et aftermarket des M14, donnant à votre fusil l'apparence authentique d'un GI M14 capable de tir automatique. Il comble le vide inesthétique et aide à garder la saleté et les débris hors de l'action. Il pivote vers la position semi-automatique ou automatique. S'installe sur la crosse, pas sur le récepteur, parfaitement légal.

SPÉCIFICATIONS : Acier, parkérisé, noir mat. S'adapte aux crosse USGI et aftermarket des fusils M14 avec découpe pour le sélecteur. Matériel de montage inclus. Un léger ajustement est nécessaire.

Plus...

Évaluations client de FULTON ARMORY SIMULATED SELECTOR LEVER

Nombre d'évaluations: 5
De brownells.com: 5
Note moyenne: 4.2

Looks good In GI stock (30.06.2011)

Installed in my GI stock in about 2 min. Looks really good and thoroughly blokes the unsightly hole.

Not a perfect fit (29.07.2011)

I had to grind quite a bit of metal off the leading edge to get this to fit the cutout on my GI stock, and also slightly relieve the wood around the handle bolster. The roll pin used to connect the handle to the body of the switch didn't go all the way through the assembly. Once put in place it looked good, and filled the cutout well.

It's like chrome wheels for you car (10.01.2013)

I have one of them on each of my three rifles. On one rifle, I had to relieve the top portion that fits under the receiver. I filed in down and that was it. The other two fit perfectly. I guess its the difference in the stocks. I was checking my targets one day and turned around to see the Range Officer burying his face into my rifle. I asked him if he was looking for a date. He was looking at the auto switch and saw the receiver said M14. An hour later the sheriff arrived and asked to see the rifle. They look that good! It makes the rifle! Before you drill any holes, make sure it isn't touching the receiver.

I love this but.... (05.01.2014)

Today, we attempted to install 3 of these, we were able to get two to fit. The third one did not fit because we were attempting to use it on a rare Devine Texas M1a. The receiver is different and some metal will need to be removed from the switch. Rule number 1, always modify the cheapest part.

To begin with, no instructions come with the switch. That isn't a bad thing, first see if the switch will fit your rifle by installing it with using the screw and roll pin. If the receiver closes then you are good to go. You can save yourself all kinds of problems by drilling the hole for the roll pin larger, I think that the pin is too big as it comes from the factory.

You are going to have to use a drill no matter what! You need to pre-drill the holes for the roll pin and screw in the wood. Install the roll pin first, remount your receiver and position the switch and check for clearance. I would not attempt to install without using a drill.

Why mess with epoxy? (25.03.2016)

The simulated selector lever dropped right in on my walnut GI M14 stock. Make sure you use the correct size drill bits for drilling into the stock for the screw and pin. I used the selector as a template and drilled the hole for the screw mount first then slightly screwed in the mounting screw into the stock to hold the selector in place. Next I drilled the pin hole into the stock to the appropriate depth and lightly tapped the pin into place with my brass faced punch hammer. Then tightened the wood screw to complete the install. The final results are a much more professional/realistic looking vs the epoxy fillers that never match the stock

Lire 5 plus d'avis sur brownells.com

0 0 1 CHF

Référence: 100005279
FULTON ARMORY SIMULATED SELECTOR LEVER
Ref Fabricant: FA-M-093 Le sélecteur simulé en une pièce, fabriqué en acier parkérisé, s'insère dans la découpe pour le sélecteur des crosses USGI et aftermarket des M14, donnant à votre fusil l'apparence authentique d'un GI M14 capable de tir automatique. Il comble le vide inesthétique et aide à garder la saleté et les débris hors de l'action. Il pivote vers la position semi-automatique ou automatique. S'installe sur la crosse, pas sur le récepteur, parfaitement légal.

Avertir lorsque l'article est disponible

Pas disponible.

Caractéristiques: Manufacture: Springfield Modèle: M14, M1A

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Le sélecteur simulé en acier parkérisé donne à ton fusil l'apparence d'un GI M14 capable de tir en pleine automatique.
Il s'installe facilement sur les crosses M14 USGI et après-vente, comblant le vide inesthétique.
Le matériel de montage est inclus, avec un léger ajustement requis pour une installation parfaite.

Caractéristiques

Manufacture: Springfield Modèle: M14,M1A Poids du colis: 0.045kg Hauteur d'expédition: 23mm Largeur d'expédition: 71mm Longueur d'expédition: 135mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x

Améliorez votre M14 avec le sélecteur simulé Fulton Armory 🔧. Un look authentique et pratique pour votre fusil !

Fills the Gap In The Stock & Gives A Semi-Auto Rifle A "Full-Auto" Look

SPECS: Steel, Parkerized, matte black. Fits USGI and aftermarket M14 rifle stocks with selector lever cutout. Mounting hardware included. Minor fitting required.

Plus...

Comble le Vide Dans La Crosse & Donne À Un Fusil Semi-Automatique Un Aspect "Automatique"

Plus...