Il Carrello è vuoto.

Carrello

Aiuto e contatti

Spedizione gratuita con ordini superiori ad CHF 399

Politica di restituzione di 100 giorni

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

KNS PRECISION
M16/M4 NON-ROTATING SEAR PIN

851876003066 923000043

Steel pin replaces original pin and locks into place against the take-down pin on M16/M4 rifles to prevent rotation and wear on receiver holes. Drop-in installation requires no tools or gunsmithing.

SPECS: Steel, matte black phosphate finish. Fits M16/M4 receivers only.

Altro...

Il perno in acciaio sostituisce il perno originale e si blocca in posizione contro il perno di smontaggio sui fucili M16/M4 per prevenire la rotazione e l'usura dei fori del ricevitore. L'installazione è semplice e non richiede strumenti o lavoro di armi.

SPECIFICHE: Acciaio, finitura fosfato nero opaco. Si adatta solo ai ricevitori M16/M4.

Altro...

Punteggi dei clienti per KNS PRECISION M16/M4 NON-ROTATING SEAR PIN

Numero di punteggi: 6
Da brownells.com: 6
Punteggio medio: 2.8

VERY DISAPPOINTED (06.07.2013)

I was surprised and disappointed with this product. After using KNS products for years in both duty and personal weapons without any problems I was surprised this product did not work. As usual for KNS, it is well made. However I found the arm / plate was too long, making an
extremely tight fit. There was so much tension on the pin that it caused the auto sear to bind, thus becoming inoperative. Attempted to install in 2 different Colt M-16A1's with the same result. KNS makes great products but the mensions on the 1 I received were not correct for a proper fit and function.

Works fine in a few NFA receivers (09.12.2013)

I have not had an issue with a few Colt A1/A2s and some other NFA RR installs. Could be a tolerance stackup in both the receiver as well as the KNS part.

It is worth saving the NFA item either way.

Not living up to the KNS reputation (21.12.2015)

KNS prides themselves on tight fit but the sear anti rotation pin was TOO tight. The sear could not rotate when installed on the KNS pin, resulting in no auto fire and uncontrollable falling of the hammer with the bolt carrier in auto.

I got a few of these to have in stock, they are all going back.

Limited fitment (06.04.2016)

This only works on Colt. I was told by KNS Built off Colt specs. Make sure your sear pin on right side of lower is directly above your safety ( 12:00 position ). Or this will be worthless!

<img width="500" src='/userdocs/reviewimages/84c1f61e-7bc5-45e7-b252-8024069b97de.jpg' alt=''>

This part is better than you think!! (27.11.2016)

As I have a bit of a difference in my experience with this part, I'll let it suffice to say the following:

Each and every "Mil-Spec" receiver has it's own minute differences. With a thousandth diff in spec from one to another, can easily cause the binding described by others.

The one I installed in a Spike's Lower was fitted properly and works as expected. The customer was very satisfied, as are the community being protected by him...

Not all recievers are created equal (02.11.2017)

I hardly ever write a review, but this product fits and works perfectly in my Sendra receiver. Which is true mill spec.

You can't blame this product for the receiver manufacturer drilling the pin hole in the wrong place. And yes a little bit matters.

Leggi più recensioni su brownells.com

69.9 69.9 1 CHF

N. prodotto: 923000043
KNS PRECISION M16/M4 NON-ROTATING SEAR PIN
Parti Fabbricante: NRSEAR 851876003066 Il perno in acciaio sostituisce il perno originale e si blocca in posizione contro il perno di smontaggio sui fucili M16/M4 per prevenire la rotazione e l'usura dei fori del ricevitore. L'installazione è semplice e non richiede strumenti o lavoro di armi.

69.9 CHF 0 CHF 69.90 *

In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: AR-15

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Il perno in acciaio sostituisce il perno originale e previene la rotazione.
L'installazione è semplice e non richiede strumenti o lavoro di gunsmithing.
Si adatta solo ai ricevitori M16/M4 ed è realizzato in acciaio con finitura fosfato nero opaco.

Caratteristiche

Adatto per: AR-15 Peso della spedizione: 0.005kg Larghezza di spedizione: 53mm Lunghezza di spedizione: 99mm UPC : 851876003066

Dettagli dell'elemento

Made in Usa

Scopri il perno non rotante KNS per M16/M4 🔩: semplice da installare, previene l'usura e migliora le prestazioni del tuo fucile!

Steel pin replaces original pin and locks into place against the take-down pin on M16/M4 rifles to prevent rotation and wear on receiver holes. Drop-in installation requires no tools or gunsmithing.

SPECS: Steel, matte black phosphate finish. Fits M16/M4 receivers only.

Altro...

SPECIFICHE: Acciaio, finitura fosfato nero opaco. Si adatta solo ai ricevitori M16/M4.

Altro...

Punteggi dei clienti per KNS PRECISION M16/M4 NON-ROTATING SEAR PIN

Numero di punteggi: 6
Da brownells.com: 6
Punteggio medio: 2.8

VERY DISAPPOINTED (06.07.2013)

Works fine in a few NFA receivers (09.12.2013)

I have not had an issue with a few Colt A1/A2s and some other NFA RR installs. Could be a tolerance stackup in both the receiver as well as the KNS part.

It is worth saving the NFA item either way.

Not living up to the KNS reputation (21.12.2015)