Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 399 CHF

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

KNS PRECISION
M16/M4 NON-ROTATING SEAR PIN

851876003066 923000043

Steel pin replaces original pin and locks into place against the take-down pin on M16/M4 rifles to prevent rotation and wear on receiver holes. Drop-in installation requires no tools or gunsmithing.

SPECS: Steel, matte black phosphate finish. Fits M16/M4 receivers only.

Plus...

Le pin en acier remplace le pin d'origine et se verrouille en place contre le pin de démontage sur les fusils M16/M4 pour empêcher la rotation et l'usure des trous du récepteur. L'installation se fait sans outils ni travail de gunsmith.

SPECIFICATIONS : Acier, finition phosphatée noire mate. Convient uniquement aux récepteurs M16/M4.

Plus...

Évaluations client de KNS PRECISION M16/M4 NON-ROTATING SEAR PIN

Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 2.8

VERY DISAPPOINTED (06.07.2013)

I was surprised and disappointed with this product. After using KNS products for years in both duty and personal weapons without any problems I was surprised this product did not work. As usual for KNS, it is well made. However I found the arm / plate was too long, making an
extremely tight fit. There was so much tension on the pin that it caused the auto sear to bind, thus becoming inoperative. Attempted to install in 2 different Colt M-16A1's with the same result. KNS makes great products but the mensions on the 1 I received were not correct for a proper fit and function.

Works fine in a few NFA receivers (09.12.2013)

I have not had an issue with a few Colt A1/A2s and some other NFA RR installs. Could be a tolerance stackup in both the receiver as well as the KNS part.

It is worth saving the NFA item either way.

Not living up to the KNS reputation (21.12.2015)

KNS prides themselves on tight fit but the sear anti rotation pin was TOO tight. The sear could not rotate when installed on the KNS pin, resulting in no auto fire and uncontrollable falling of the hammer with the bolt carrier in auto.

I got a few of these to have in stock, they are all going back.

Limited fitment (06.04.2016)

This only works on Colt. I was told by KNS Built off Colt specs. Make sure your sear pin on right side of lower is directly above your safety ( 12:00 position ). Or this will be worthless!

<img width="500" src='/userdocs/reviewimages/84c1f61e-7bc5-45e7-b252-8024069b97de.jpg' alt=''>

This part is better than you think!! (27.11.2016)

As I have a bit of a difference in my experience with this part, I'll let it suffice to say the following:

Each and every "Mil-Spec" receiver has it's own minute differences. With a thousandth diff in spec from one to another, can easily cause the binding described by others.

The one I installed in a Spike's Lower was fitted properly and works as expected. The customer was very satisfied, as are the community being protected by him...

Not all recievers are created equal (02.11.2017)

I hardly ever write a review, but this product fits and works perfectly in my Sendra receiver. Which is true mill spec.

You can't blame this product for the receiver manufacturer drilling the pin hole in the wrong place. And yes a little bit matters.

Lire 6 plus d'avis sur brownells.com

69.9 69.9 1 CHF

Référence: 923000043
KNS PRECISION M16/M4 NON-ROTATING SEAR PIN
Ref Fabricant: NRSEAR 851876003066 Le pin en acier remplace le pin d'origine et se verrouille en place contre le pin de démontage sur les fusils M16/M4 pour empêcher la rotation et l'usure des trous du récepteur. L'installation se fait sans outils ni travail de gunsmith.

69.9 CHF 0 CHF 69.90 *

En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.

Caractéristiques: Manufacture: AR-15

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Remplace la goupille d'origine et empêche la rotation sur les fusils M16/M4.
Installation facile sans outils ni besoin d'un armurier.
Fabriqué en acier avec une finition phosphatée noire mate, s'adapte uniquement aux récepteurs M16/M4.

Caractéristiques

Manufacture: AR-15 Poids du colis: 0.005kg Largeur d'expédition: 53mm Longueur d'expédition: 99mm UPC : 851876003066

Détails de l'article

Fabriqué au USA

Améliorez votre M16/M4 avec le pin non-rotatif KNS Precision. 🔧 Installation facile, durable et sans outils. Ne manquez pas cette mise à niveau!

Steel pin replaces original pin and locks into place against the take-down pin on M16/M4 rifles to prevent rotation and wear on receiver holes. Drop-in installation requires no tools or gunsmithing.

SPECS: Steel, matte black phosphate finish. Fits M16/M4 receivers only.

Plus...

SPECIFICATIONS : Acier, finition phosphatée noire mate. Convient uniquement aux récepteurs M16/M4.

Plus...

Évaluations client de KNS PRECISION M16/M4 NON-ROTATING SEAR PIN

Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 2.8

VERY DISAPPOINTED (06.07.2013)

Works fine in a few NFA receivers (09.12.2013)

I have not had an issue with a few Colt A1/A2s and some other NFA RR installs. Could be a tolerance stackup in both the receiver as well as the KNS part.

It is worth saving the NFA item either way.

Not living up to the KNS reputation (21.12.2015)