Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

BROWNELLS
MATCH GRADE CONVERSION BARRELS FOR GLOCK® 23

050806113176 078000556
A Drop-In .40 S&W to 9mm Conversion Barrel for Your G23
The Brownells Match-Grade Conversion Barrel enables you to switch your .40 S&W chambered Glock® 23 to shoot 9mm Luger (9x19mm) ammo AND also improve its accuracy potential at the same time. It fits Gen1 through Gen4 variants of the Glock® 23, and will be a drop-in install on most guns. Each conversion barrel is machined from 416R stainless steel alloy to precise dimensions to ensure a tight lockup and long service life. Button-rifled with 1-10" right-hand, 6-groove rifling that is compatible with inexpensive "practice" ammo that has non-jacketed bullets. The hard Black Nitride finish resists surface wear and stops in its tracks whatever corrosion might try to challenge the stainless steel. Available with either a Plain muzzle or Threaded (1/2"-28 tpi) to enable installation of a compensator or sound suppressor. Both have an 11-degree target crown, and each is laser engraved with the chambering and the Glock model it fits. Fits Glock® 23 Gen1 thru Gen4 G19-compatible 9mm magazine required to complete the conversion (not included) Extra-strong 416R stainless steel alloy Matte black Nitride anti-corrosion finish Button-rifled 1-10" twist Threaded model has 1/2"-28 tpi threads If you have an old Glock® 23 with a shot-out factory barrel, give it a new lease on life. Swap in a Brownells match-grade conversion barrel and enjoy the gentler recoil AND lower cost of 9mm ammo. Remember: to complete the conversion, you will need to add a Glock 19 compatible 9mm magazine.
209.9 209.9 2 CHF
N. prodotto: 078000556
BROWNELLS G23 BARREL GEN 1-4 9MM BLACK NITRIDE
Parti Fabbricante: NONE 050806113176
Avvisa quando diventa disponibile
Non disponibile.
Caratteristiche: Adatto per: Glock Cartuccia: 9 mm Luger Finitura: Black Nitride Modello: 23 Tipo: Non-Threaded

Restrizioni

  • Permesso Acquisto Armi Richiesto

Caratteristiche

Adatto per: Glock Cartuccia: 9 mm Luger Finitura: Black Nitride Modello: 23 Tipo: Non-Threaded Peso della spedizione: 0.132kg Altezza di spedizione: 51mm Larghezza di spedizione: 51mm Lunghezza di spedizione: 178mm UPC : 050806113176

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.c



N. prodotto: 078000557
BROWNELLS G23 BARREL THREADED 1/2X28 GEN 1-4 9MM BLACK NITRIDE
Parti Fabbricante: NONE 050806113183
209.9 CHF 77 CHF 209.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Glock Cartuccia: 9 mm Luger Finitura: Black Nitride Modello: 23 Tipo: Filettato

Restrizioni

  • Permesso Acquisto Armi Richiesto

Caratteristiche

Adatto per: Glock Cartuccia: 9 mm Luger Finitura: Black Nitride Modello: 23 Tipo: Filettato Peso della spedizione: 0.15kg Altezza di spedizione: 51mm Larghezza di spedizione: 51mm Lunghezza di spedizione: 178mm UPC : 050806113183

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.c


Scopri la canna MATCH GRADE per Glock 23! 🔥 Compatibile con modelli Gen 1-4, finitura Black Nitride e cartuccia 9mm.

A Drop-In .40 S&W to 9mm Conversion Barrel for Your G23
The Brownells Match-Grade Conversion Barrel enables you to switch your .40 S&W chambered Glock® 23 to shoot 9mm Luger (9x19mm) ammo AND also improve its accuracy potential at the same time. It fits Gen1 through Gen4 variants of the Glock® 23, and will be a drop-in install on most guns. Each conversion barrel is machined from 416R stainless steel alloy to precise dimensions to ensure a tight lockup and long service life. Button-rifled with 1-10" right-hand, 6-groove rifling that is compatible with inexpensive "practice" ammo that has non-jacketed bullets. The hard Black Nitride finish resists surface wear and stops in its tracks whatever corrosion might try to challenge the stainless steel. Available with either a Plain muzzle or Threaded (1/2"-28 tpi) to enable installation of a compensator or sound suppressor. Both have an 11-degree target crown, and each is laser engraved with the chambering and the Glock model it fits. Fits Glock® 23 Gen1 thru Gen4 G19-compatible 9mm magazine required to complete the conversion (not included) Extra-strong 416R stainless steel alloy Matte black Nitride anti-corrosion finish Button-rifled 1-10" twist Threaded model has 1/2"-28 tpi threads If you have an old Glock® 23 with a shot-out factory barrel, give it a new lease on life. Swap in a Brownells match-grade conversion barrel and enjoy the gentler recoil AND lower cost of 9mm ammo. Remember: to complete the conversion, you will need to add a Glock 19 compatible 9mm magazine.
Torna all'inizio