Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 399 CHF

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

BROWNELLS
MAUSER 91 DOVETAIL FRONT SIGHT BLANK

050806101524 078050000

Ready To Fit & Shape For Custom Applications

.375" high blade lets you zero the Model 96 Swede and others to point of aim. Square post blade gives an easy-to-see, well defined sight picture with issue rear sights. Plenty of extra material so you can file and shape the blade to original contour or a custom shape. 5.26mm dovetail fits the Mauser front sight base. Fits most Mauser 91 through 98 rifles with military sight base.

SPECS: Steel, blued, matte finish. .077" (1.9mm) wide, .375" (9.5mm) high above 81° x .207" x .081" dovetail. May require minor fitting.

Plus...

Prêt à être ajusté et façonné pour des applications personnalisées

.375" de hauteur de lame te permet de régler le Model 96 Suédois et d'autres pour viser correctement. La lame à poteau carré offre une image de visée bien définie et facile à voir avec les organes de visée arrière d'origine. Beaucoup de matériau supplémentaire pour que tu puisses limer et façonner la lame selon le contour d'origine ou une forme personnalisée. Dovetail de 5.26mm s'adapte à la base de visée avant Mauser. S'adapte à la plupart des fusils Mauser 91 à 98 avec base de visée militaire.

SPECIFICATIONS : Acier, bleu, finition mate. .077" (1.9mm) de large, .375" (9.5mm) de haut au-dessus de 81° x .207" x .081" dovetail. Peut nécessiter un ajustement mineur.

Plus...

Évaluations client de BROWNELLS MAUSER 91 .375" DOVETAIL FRONT SIGHT BLANK STEEL BLACK

Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 4.4

CMP legal (26.04.2010)

This front sight is now legal for CMP's Vintage rifle matches. Most Mauser front sights are too short for regulation at 100 or 200 yds and their pyramid shape is harder to see than a square partridge style blade. This blade is easy to install and file the height to regulate to 100 yds. A little cold blueing after filing and you're in business. I have used them on my Swede M-96 and German K-98.

I really liked this product (20.01.2011)

Excellent replacement of stock military sight; easily filed to proper height. Flat top easier to see than stock military sights. Would buy again.

Very Nice Sight (02.09.2011)

Hello,Tall Mauser sights have been hard to find. My Gewehr 88 Commission Rifle (bought for [$] for the folks who hate me mentioning this!) takes Mauser sights and had been shooting a foot high at 50 yards, and I'm not sure how high at 100!I bought this sight blank, fitted it, brought it down to my preferred elevation, sharpened the top with a "V" shaped carbide knife sharpener, blued it, and proceeded to enjoy!I highly recommend this to anyone who hates holding under. It is a quality product.I'm so impressed I'm posting a review on all the boards I belong to, recommending this product. Thank you,Josh

Front Sight blade (19.03.2012)

These sight blades save me heaps of time when setting up a good service rifle, I used to have to weld up all my Swedish mauser sights to get them to shoot to the point of aim but with these inserts I just file them to height plus since they are square they provide a better sight picture.

Exactly what I needed! Another home run! (17.07.2013)

I have a 1928 Carl Gustafs Swedish Mauser. I was able to locate an original competition rear peep sight for it...only trouble was that the original front sights was way too low.

After trying to find original sights, I stumbled upon this one. It DOES require fitting, so get out your small precision files, and sandpaper, and spend some time doing it right.

After about 30min filing, I had it fit. As for the height? 100% correct. The rifle now shoots point of aim and in line with the yardage numbers on the peep.

Nice quality, and nice flat finish. I recommend this product.

Very Happy! (03.02.2014)

Just put this on my Yugo M24/47. The original front sight was installed from the RIGHT looking at the target so tap it out from the LEFT side. The bottom of the new sight base had to be filed down by about 0.01 inch to fit. Also filed down the base corners every so slightly to alow easier installation. Put Frog Lube on it to prevent rusting and help slide it in place. Put some red fluorescent paint on it and checked windage while looking through barrel at yonder pine tree top. Off to the range with it now!

prepare to file (20.06.2015)

The paperwork says minor fitting may be necessary. Thats an understatement. Will not even come close to fitting K98, M48, M24/47 Mausers. I have all three and this sight is nowhere close to fitting without major modifications. The dove tail angle is incorrect, its too thick, too long and too wide. It doesnt even fit the specs that Brownells publishes. 4.5 hours with a file and i am still trying to get the thing to fit. i see all these good reviews, i guess i am the lucky one that got the lemon.

Dissapointed (11.02.2017)

I found this item to be somewhat irritating simply because the dovetail angle is incorrect, on my 1915 M-96 Swedish Mauser. The angle is not as steep as the factory dovetail cutout, and this causes you to have to reshape the angle. I don't mind flling/sanding; but the angle should match the Factory cutout...it does not.

Front sight replace in my Mitchell mause (16.04.2017)

My Mauser was shooting high. I bought brownels front sight and used a set of needle files. The sides of the dovetail were steeper than that of the front sight so I filed to fit. Be careful how much you take off the sight it needs to fit tight. I used my micrometer. I was able t fit it well and shot at the range. Of course it shot very low so I filed the top of blade and made fast adjustments. I got it shooting dead on and it is better than the factory sight. I wish there was a rear replacement as the Mauser rear is a bit junky. This replacement blade is all you need and will work fine on any Mauser that I can imagine. some fitting will be required becausethere is too much variation from Mauser to Mauser. By it you will be happy have a smith place it if you can't. This is a very good product I'm glad I bought it.

A FEW MINUTES OF FILING (25.08.2017)

Took about 20 minutes with a couple files and was good to go. Fit my Yugoslavian m24/47 but had to take .020" off the bottom with a flat course file and I used my triangle shaped file on the dove tails to get those to fit my base. It's about .200" taller than the one that was on it so hopefully I'll get the impact where it should be. Not a foot high at 100 yards. Just remember it's made big so you or your gunsmith can fit it to your rifle.

Lire 10 plus d'avis sur brownells.com

35.9 35.9 1 CHF

Référence: 078050000
BROWNELLS MAUSER 91 .375" DOVETAIL FRONT SIGHT BLANK STEEL BLACK 050806101524 .375" de hauteur de lame te permet de régler le Model 96 Suédois et d'autres pour viser correctement. La lame à poteau carré offre une image de visée bien définie et facile à voir avec les organes de visée arrière d'origine. Beaucoup de matériau supplémentaire pour que tu puisses limer et façonner la lame selon le contour d'origine ou une forme personnalisée. Dovetail de 5.26mm s'adapte à la base de visée avant Mauser. S'adapte à la plupart des fusils Mauser 91 à 98 avec base de visée militaire.

35.9 CHF 61 CHF 35.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Couleur: Noir Hauteur: .375 Manufacture: Mauser Matériaux: Steel Modèle: 94, 91, 93, 98, 96, 95 Style: Queue d'Aronde

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

La lame de .375" te permet de régler le Model 96 Suédois et d'autres fusils pour un point de visée précis.
Le dovetail de 5.26mm s'adapte à la base de visée avant Mauser, compatible avec la plupart des fusils Mauser 91 à 98.
Beaucoup de matériel supplémentaire est inclus pour que tu puisses limer et façonner la lame selon tes préférences.

Caractéristiques

Couleur: Noir Hauteur: .375 Manufacture: Mauser Matériaux: Steel Modèle: 91,93,94,95,96,98 Style: Queue d'Aronde Poids du colis: 0.009kg Hauteur d'expédition: 13mm Largeur d'expédition: 86mm Longueur d'expédition: 259mm UPC : 050806101524

Détails de l'article

Fabriqué au USA

Améliore ta visée avec le MAUSER 91 Dovetail Front Sight Blank 🏹. Ajustable, en acier noir, parfait pour les fusils Mauser 91 à 98.

Ready To Fit & Shape For Custom Applications

SPECS: Steel, blued, matte finish. .077" (1.9mm) wide, .375" (9.5mm) high above 81° x .207" x .081" dovetail. May require minor fitting.

Plus...

Prêt à être ajusté et façonné pour des applications personnalisées

SPECIFICATIONS : Acier, bleu, finition mate. .077" (1.9mm) de large, .375" (9.5mm) de haut au-dessus de 81° x .207" x .081" dovetail. Peut nécessiter un ajustement mineur.

Plus...

Évaluations client de BROWNELLS MAUSER 91 .375" DOVETAIL FRONT SIGHT BLANK STEEL BLACK

Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 4.4

CMP legal (26.04.2010)

I really liked this product (20.01.2011)

Excellent replacement of stock military sight; easily filed to proper height. Flat top easier to see than stock military sights. Would buy again.

Very Nice Sight (02.09.2011)

Front Sight blade (19.03.2012)

Exactly what I needed! Another home run! (17.07.2013)

Very Happy! (03.02.2014)

prepare to file (20.06.2015)

Dissapointed (11.02.2017)

Front sight replace in my Mitchell mause (16.04.2017)

A FEW MINUTES OF FILING (25.08.2017)

Lire 10 plus d'avis sur brownells.com

BROWNELLS
MAUSER 91 DOVETAIL FRONT SIGHT BLANK

Évaluations client de BROWNELLS MAUSER 91 .375" DOVETAIL FRONT SIGHT BLANK STEEL BLACK

Points forts

Caractéristiques

Détails de l'article

Évaluations client de BROWNELLS MAUSER 91 .375" DOVETAIL FRONT SIGHT BLANK STEEL BLACK

Se connecter

Méthodes de paiement sécurisées

Associations professionnelles

Bienvenue !

BROWNELLS MAUSER 91 DOVETAIL FRONT SIGHT BLANK

Évaluations client de BROWNELLS MAUSER 91 .375" DOVETAIL FRONT SIGHT BLANK STEEL BLACK

Points forts

Caractéristiques

Détails de l'article

Évaluations client de BROWNELLS MAUSER 91 .375" DOVETAIL FRONT SIGHT BLANK STEEL BLACK

Se connecter

Méthodes de paiement sécurisées

Associations professionnelles

Bienvenue !

BROWNELLS
MAUSER 91 DOVETAIL FRONT SIGHT BLANK