Solid & Lightweight For Mounting Scopes & Other Optics
Weaver-style scope mounting rail matches the top contour on all Mossberg 500/590 and 835 models for a durable, no-gap installation. Held by four, 8-40 tpi machine screws that stand up to recoil without deformation or stripping. Machined from lightweight, extruded aluminum, and anodized to match the anodized or black painted Mossberg receivers. Accepts all Weaver-style scope mounts and accessories.
SPECS: Aluminum, black, anodized finish. 5” (12.7cm) long. 2 oz. (56.6g) wt. Includes (4), 8-40 tpi mounting screws. Installation requires drilling and tapping on early model Mossberg 500.
Plus...
Solide et léger pour le montage de lunettes et d'autres optiques
Le rail de montage de lunette de style Weaver s'adapte au contour supérieur de tous les modèles Mossberg 500/590 et 835 pour une installation durable sans espace. Maintenu par quatre vis de machine 8-40 tpi qui résistent au recul sans se déformer ni se dévisser. Usiné à partir d'aluminium léger extrudé et anodisé pour correspondre aux récepteurs Mossberg anodisés ou peints en noir. Accepte tous les supports et accessoires de lunette de style Weaver.
CARACTÉRISTIQUES : Aluminium, finition noire anodisée. Longueur de 5” (12,7 cm). Poids de 2 oz. (56,6 g). Comprend (4) vis de montage 8-40 tpi. L'installation nécessite le perçage et le taraudage sur les premiers modèles de Mossberg 500.
Plus...
Évaluations client de HAVLIN MOSSBERG SCOPE RAIL
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 5
Rail great - Mossberg receiver marginal(24.06.2010)
- I used this rail to mount a 1-4 scope on a Mossberg 535 receiver using the pre-drilled & tapped holes. The fit and finish of the rail couldn't be better. - However, a caution. The rail to receiver screws are going to require some serious 'Loctite'. After 7 3" rifled slugs, the impact point started to shift greatly. At 10, none were on the paper. - All four rail mounting screws (that had been carefully torqued to 15 in lbs) had shot loose from the aluminum alloy receiver.
Lives Up to the Manufactuer's Promise!!(03.09.2010)
Great Accessory, especially for the price!! I bought & recieved this product, pronto!! No complaints so far. I installed the rail right when I got it and it was a quick, easy install (**need benchrest or something to rest gun on**, makes it easier).
I threw a BSA red-dot scope on my Tactical Mossberg 500 and put 50 rounds thru shotgun without any problems, then put an EOTECH sight on it and put another 50 rounds downrange. HOLY, MOLY!!! No problems yet to date.
Just screw the screws in tight, I didn't need Loc-Tite and your good to go. Its a must buy, you will not be let down. I PROMISE!!!
Référence: 100002901 HAVLIN MOSSBERG SCOPE RAIL Ref Fabricant: M500R8 Le rail de montage de lunette de style Weaver s'adapte au contour supérieur de tous les modèles Mossberg 500/590 et 835 pour une installation durable sans espace. Maintenu par quatre vis de machine 8-40 tpi qui résistent au recul sans se déformer ni se dévisser. Usiné à partir d'aluminium léger extrudé et anodisé pour correspondre aux récepteurs Mossberg anodisés ou peints en noir. Accepte tous les supports et accessoires de lunette de style Weaver.
47.9CHF8CHF 47.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Solid & Lightweight For Mounting Scopes & Other Optics
Weaver-style scope mounting rail matches the top contour on all Mossberg 500/590 and 835 models for a durable, no-gap installation. Held by four, 8-40 tpi machine screws that stand up to recoil without deformation or stripping. Machined from lightweight, extruded aluminum, and anodized to match the anodized or black painted Mossberg receivers. Accepts all Weaver-style scope mounts and accessories.
SPECS: Aluminum, black, anodized finish. 5” (12.7cm) long. 2 oz. (56.6g) wt. Includes (4), 8-40 tpi mounting screws. Installation requires drilling and tapping on early model Mossberg 500.
Plus...
Solide et léger pour le montage de lunettes et d'autres optiques
Le rail de montage de lunette de style Weaver s'adapte au contour supérieur de tous les modèles Mossberg 500/590 et 835 pour une installation durable sans espace. Maintenu par quatre vis de machine 8-40 tpi qui résistent au recul sans se déformer ni se dévisser. Usiné à partir d'aluminium léger extrudé et anodisé pour correspondre aux récepteurs Mossberg anodisés ou peints en noir. Accepte tous les supports et accessoires de lunette de style Weaver.
CARACTÉRISTIQUES : Aluminium, finition noire anodisée. Longueur de 5” (12,7 cm). Poids de 2 oz. (56,6 g). Comprend (4) vis de montage 8-40 tpi. L'installation nécessite le perçage et le taraudage sur les premiers modèles de Mossberg 500.
Plus...
Évaluations client de HAVLIN MOSSBERG SCOPE RAIL
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 5
Rail great - Mossberg receiver marginal(24.06.2010)
- I used this rail to mount a 1-4 scope on a Mossberg 535 receiver using the pre-drilled & tapped holes. The fit and finish of the rail couldn't be better. - However, a caution. The rail to receiver screws are going to require some serious 'Loctite'. After 7 3" rifled slugs, the impact point started to shift greatly. At 10, none were on the paper. - All four rail mounting screws (that had been carefully torqued to 15 in lbs) had shot loose from the aluminum alloy receiver.
Lives Up to the Manufactuer's Promise!!(03.09.2010)
Great Accessory, especially for the price!! I bought & recieved this product, pronto!! No complaints so far. I installed the rail right when I got it and it was a quick, easy install (**need benchrest or something to rest gun on**, makes it easier).
I threw a BSA red-dot scope on my Tactical Mossberg 500 and put 50 rounds thru shotgun without any problems, then put an EOTECH sight on it and put another 50 rounds downrange. HOLY, MOLY!!! No problems yet to date.
Just screw the screws in tight, I didn't need Loc-Tite and your good to go. Its a must buy, you will not be let down. I PROMISE!!!