QD Scope Mounts Midwest Industries incorporates on of the smoothest functioning QD levers on the market. Extremely smooth in operation with a multi-facetted adjustment nut to get the exact tension required without damaging the rail surface. Fully adjustable with no tools. Weighing in at 8.4 oz, these mounts are precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 Aluminum for a lifetime of service. Works with scopes up to a56mm objective lens. Works with scopes up to a 56mm Objective Weight: 8.4 oz Overall Length: 5.875" Width of Rings: .85" Distance between rings: 2.8" Offset from the first ring: 1.4" Height- top of rail to center line of ring: 1.5"
Altro...
I supporti QD di Midwest Industries incorporano uno dei leve QD più fluidi sul mercato. Estremamente fluidi nel funzionamento con un dado di regolazione multifaccettato per ottenere la tensione esatta richiesta senza danneggiare la superficie del rail. Completamente regolabili senza attrezzi. Con un peso di 8,4 oz, questi supporti sono realizzati con precisione per ottimizzare le prestazioni di ritorno al punto zero e l'affidabilità. Anodizzati a duro in alluminio 6061 per una vita di servizio. Compatibili con ottiche fino a un obiettivo di 56 mm. Peso: 8,4 oz Lunghezza totale: 5,875" Larghezza degli anelli: 0,85" Distanza tra gli anelli: 2,8" Offset dal primo anello: 1,4" Altezza - parte superiore del rail alla linea centrale dell'anello: 1,5"
Altro...
Punteggi dei clienti per MIDWEST INDUSTRIES 1" 1.5" 0 MOA QD CANTILEVER MOUNT, BLACK
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 3.3
Disappointed(10.11.2015)
The concept is great but execution is lacking. I mounted this base to a Ruger 7.62 semi-auto of known accuracy. I like the lockup and expect it to be reasonable about return to zero after I fix the problems with the rings. I did the first test and the scope, a Leupold 2.5-8 Mark 4 kept slipping forward when I shot the rifle. I torqued the screws as specified so rechecked. Then I tightened them more. The scope still slipped under recoil. At home I examined the rings and found the front ring is only contacting the scope tube at the rear of the ring. The rear ring when torqued does not grip the scope at all. I can turn the scope in the rear ring with the front ring removed. I'm going to lap the rings tomorrow and mill about .010 off the bottom flats of the rings and that should cure the problem. My issue is rings costing a premium price should offer good quality control.
Follow up on previous review(13.11.2015)
I'm writing a follow-up to my previous review. I lapped the rings as I described previously and then had to mill ,020 off the flats of the rings to get a good grip on the scope. I noticed the bottom half of the rings is a casting and not quite flat. It may be .010 or so out. After fixing the rings the scope no longer slipped. I tested removing and replacing the scope on the rifle between shoots to test return to zero. That appears to stay within 1/2 a minute which I consider good. I probably would not have noticed any problem if I mounted it on a .223 however the recoil of the 7.62 brought the issue to light. Midwest Industries hopefully is aware that there may be a problem and will fix it. Anyone can fix this issue with a file and stone if they don't have access to a mill.
Chuck In Anchorage
Update Number 2(20.11.2015)
I wanted to follow up on the 2 previous reviews. I notified Midwest about the issue I had and they got back to me almost immediately. They are looking into the problem. I suspect they will have it resolved before this review makes the website. I'm impressed with their response and I have no reservations about recommending this mount. I think it's just one of those things that occasionally happens. I know Brownells would stand behind it if I decided to return the mount. I happen to like it and fixed the problem myself.
4+ - Problem is packaging(11.07.2016)
This mount is fantastic and precise! 4 screws on each arch makes sure the scope stays tight. The QD levers are easy to operate and secure the mount without marring the AR top rail.
I just mounted it tonight, but once I zero the scope and then remove and put it back on, it looks like it should hold zero well, but that is yet to be determined.
My only complaint is the packaging. Take a look at the pictures. Because the mount can shift around in the package, it actually scraped off plastic on the top and sides so that I originally thought the scope was damaged and used when I took it out of the package. I was able to wipe off all the white plastic, but the mount is still all scratched up. Now, this is a 3-gun mount for my 1-4x scope and it will take a beating, so it will end up scratched anyway, but when you pay $180 for a new mount, you want it to start clean.
N. prodotto: 100018509 MIDWEST INDUSTRIES 1" 1.5" 0 MOA QD CANTILEVER MOUNT, BLACK Parti Fabbricante: MIQD1SM816537018872 I supporti QD di Midwest Industries incorporano uno dei leve QD più fluidi sul mercato. Estremamente fluidi nel funzionamento con un dado di regolazione multifaccettato per ottenere la tensione esatta richiesta senza danneggiare la superficie del rail. Completamente regolabili senza attrezzi. Con un peso di 8,4 oz, questi supporti sono realizzati con precisione per ottimizzare le prestazioni di ritorno al punto zero e l'affidabilità. Anodizzati a duro in alluminio 6061 per una vita di servizio. Compatibili con ottiche fino a un obiettivo di 56 mm. Peso: 8,4 oz Lunghezza totale: 5,875" Larghezza degli anelli: 0,85" Distanza tra gli anelli: 2,8" Offset dal primo anello: 1,4" Altezza - parte superiore del rail alla linea centrale dell'anello: 1,5"
294.9CHF8CHF 294.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
I supporti QD di Midwest Industries offrono un funzionamento estremamente fluido e regolabile senza strumenti.
Peso di 8,4 oz e fresati con precisione per ottimizzare le prestazioni e l'affidabilità nel ritorno alla zero.
Compatibile con ottiche fino a un obiettivo di 56 mm e anodizzati in alluminio 6061 per una lunga durata.
Caratteristiche
Altezza:
1.5''
Diametro del tubo dell'ottica:
1''
Elevation:
0 MOA
Finitura:
Opaco Black
Tipo:
Picatinny
Peso della spedizione: 0.308kgAltezza di spedizione: 70mmLarghezza di spedizione: 191mmLunghezza di spedizione: 254mm
UPC
: 816537018872
Dettagli dell'elemento
Made in Usa
N. prodotto: 100018510 MIDWEST INDUSTRIES 30MM 1.5" 0 MOA QD CANTILEVER MOUNT, BLACK Parti Fabbricante: MI-QD30SM816537013839 I supporti QD di Midwest Industries incorporano uno dei leve QD più fluidi sul mercato. Estremamente fluidi nel funzionamento con un dado di regolazione multifaccettato per ottenere la tensione esatta richiesta senza danneggiare la superficie del rail. Completamente regolabili senza attrezzi. Con un peso di 8,4 oz, questi supporti sono realizzati con precisione per ottimizzare le prestazioni di ritorno al punto zero e l'affidabilità. Anodizzati a duro in alluminio 6061 per una vita di servizio. Compatibili con ottiche fino a un obiettivo di 56 mm. Peso: 8,4 oz Lunghezza totale: 5,875" Larghezza degli anelli: 0,85" Distanza tra gli anelli: 2,8" Offset dal primo anello: 1,4" Altezza - parte superiore del rail alla linea centrale dell'anello: 1,5"
334.9CHF15CHF 334.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
QD Scope Mounts Midwest Industries incorporates on of the smoothest functioning QD levers on the market. Extremely smooth in operation with a multi-facetted adjustment nut to get the exact tension required without damaging the rail surface. Fully adjustable with no tools. Weighing in at 8.4 oz, these mounts are precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 Aluminum for a lifetime of service. Works with scopes up to a56mm objective lens. Works with scopes up to a 56mm Objective Weight: 8.4 oz Overall Length: 5.875" Width of Rings: .85" Distance between rings: 2.8" Offset from the first ring: 1.4" Height- top of rail to center line of ring: 1.5"
Altro...
I supporti QD di Midwest Industries incorporano uno dei leve QD più fluidi sul mercato. Estremamente fluidi nel funzionamento con un dado di regolazione multifaccettato per ottenere la tensione esatta richiesta senza danneggiare la superficie del rail. Completamente regolabili senza attrezzi. Con un peso di 8,4 oz, questi supporti sono realizzati con precisione per ottimizzare le prestazioni di ritorno al punto zero e l'affidabilità. Anodizzati a duro in alluminio 6061 per una vita di servizio. Compatibili con ottiche fino a un obiettivo di 56 mm. Peso: 8,4 oz Lunghezza totale: 5,875" Larghezza degli anelli: 0,85" Distanza tra gli anelli: 2,8" Offset dal primo anello: 1,4" Altezza - parte superiore del rail alla linea centrale dell'anello: 1,5"
Altro...
Punteggi dei clienti per MIDWEST INDUSTRIES 1" 1.5" 0 MOA QD CANTILEVER MOUNT, BLACK
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 3.3
Disappointed(10.11.2015)
The concept is great but execution is lacking. I mounted this base to a Ruger 7.62 semi-auto of known accuracy. I like the lockup and expect it to be reasonable about return to zero after I fix the problems with the rings. I did the first test and the scope, a Leupold 2.5-8 Mark 4 kept slipping forward when I shot the rifle. I torqued the screws as specified so rechecked. Then I tightened them more. The scope still slipped under recoil. At home I examined the rings and found the front ring is only contacting the scope tube at the rear of the ring. The rear ring when torqued does not grip the scope at all. I can turn the scope in the rear ring with the front ring removed. I'm going to lap the rings tomorrow and mill about .010 off the bottom flats of the rings and that should cure the problem. My issue is rings costing a premium price should offer good quality control.
Follow up on previous review(13.11.2015)
I'm writing a follow-up to my previous review. I lapped the rings as I described previously and then had to mill ,020 off the flats of the rings to get a good grip on the scope. I noticed the bottom half of the rings is a casting and not quite flat. It may be .010 or so out. After fixing the rings the scope no longer slipped. I tested removing and replacing the scope on the rifle between shoots to test return to zero. That appears to stay within 1/2 a minute which I consider good. I probably would not have noticed any problem if I mounted it on a .223 however the recoil of the 7.62 brought the issue to light. Midwest Industries hopefully is aware that there may be a problem and will fix it. Anyone can fix this issue with a file and stone if they don't have access to a mill.
Chuck In Anchorage
Update Number 2(20.11.2015)
I wanted to follow up on the 2 previous reviews. I notified Midwest about the issue I had and they got back to me almost immediately. They are looking into the problem. I suspect they will have it resolved before this review makes the website. I'm impressed with their response and I have no reservations about recommending this mount. I think it's just one of those things that occasionally happens. I know Brownells would stand behind it if I decided to return the mount. I happen to like it and fixed the problem myself.
4+ - Problem is packaging(11.07.2016)
This mount is fantastic and precise! 4 screws on each arch makes sure the scope stays tight. The QD levers are easy to operate and secure the mount without marring the AR top rail.
I just mounted it tonight, but once I zero the scope and then remove and put it back on, it looks like it should hold zero well, but that is yet to be determined.
My only complaint is the packaging. Take a look at the pictures. Because the mount can shift around in the package, it actually scraped off plastic on the top and sides so that I originally thought the scope was damaged and used when I took it out of the package. I was able to wipe off all the white plastic, but the mount is still all scratched up. Now, this is a 3-gun mount for my 1-4x scope and it will take a beating, so it will end up scratched anyway, but when you pay $180 for a new mount, you want it to start clean.