Universal shell holder will accept cases from .32 ACP to .45-70 Government Patented safety gate isolates the primer seating operation from the primer supply virtually eliminating the possibility of tray detonation Removable primer tray orients your primers for use and will fit any manufacturers primer packaging Included accessories to seat large and small rifle or pistol primers
Altro...
Il supporto universale per cartucce accetta casi da .32 ACP a .45-70 Government. Il cancello di sicurezza brevettato isola l'operazione di inserimento del primer dall'alimentazione del primer, eliminando praticamente la possibilità di detonazione del vassoio. Il vassoio per primer rimovibile orienta i tuoi primer per l'uso e si adatta a qualsiasi confezione di primer di qualsiasi produttore. Accessori inclusi per inserire primer di fucile o pistola di grande e piccolo formato.
Altro...
Punteggi dei clienti per RCBS UNIVERSAL HAND PRIMING TOOL
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4.8
A BIG time saver for reloaders(01.12.2012)
If you do any sort of reloading with a hand or turret press, I would highly recommend this tool for your priming to save you time.
As the name suggests, it fits right in your hand and does not make a mess, so there is no reason why you could not use this indoors in front of the television. I can easily prime at least 1000 cartridges in less than an hour while watching a movie or show. All it takes is a squeeze of your fingers and your cartridge is primed. Best of all, you can feel what is going on so if there is any resistance, you know to stop before something can go wrong.
This priming tool comes with the proper pieces to use both small and large sized primers and it only takes a couple seconds to switch between.
My only two complaints about this particular tool is it is kind of pricy compared to other priming tools like the Lee one. However I have never tried the Lee priming tool so I have no basis of comparison on whether this is any better or worse. The only thing keeping this from being a perfect 5/5 is the cost. My other complaint is the sliding door on the primer holder is very loose so sometimes it will shut on you while you are priming. Not a deal breaker, but it can get annoying sometimes. I remedied this by taping it open when using it.
The benefit of this universal hand priming tool and the regular RCBS hand priming tool is this does not require any shell holders (hence, "universal"). So if you reload more than 2 or 3 different calibers, this will already save you some money over the other one since you do not need to get extra shell holders. Plus this comes with the square primer holder as opposed to the circle holder the other one comes with, which makes it easier to load primers from their boxes (I cannot think of any primers that come in round cases).
I would highly recommend a dedicated hand priming tool as a time saver, even if not this one.
Wow!(10.01.2013)
Expensive for a priming tool, but absolutely top notch as a hand primer. It's comfortable, easy to load primers, comfortable, easy to load the brass, comfortable, and smooooooth. It's also super comfortable! To be perfectly honest, I'd recommend the RCBS bench primer overall, but it's probably not fair to compare a bench primer to a handheld, so this still gets an easy five stars.
Great Product(04.03.2015)
I'm just getting into hand loading, and I've acquired equipment for a single-stage press. I bought the RCBS Universal Hand Priming Tool to handle priming, and I couldn't be happier.
This product is easy to use. It installs primers quickly, easily, and correctly.
This is a great product.
RCBS Universal Primer. (28.09.2015)
I used to use the primer on my Forster co-ax press but it would damage the rims on the base of the cartridge causing measurements to be off. After numerous unsuccessful attempts @ adjusting the Forster I chose the RCBS primer. This has been a very pleasant surprise. I just loaded 50 cartridges in about 5 minutes after initial set up and couldn't be happier. All primers were uniform in depth and seating in my used 6BR Lapua brass. The pull was smooth and consistent and did not fatigue my wrist. The universal jaws fit the brass securely and did not damage the edges. This performed far better than my co-ax press primer.
RCBS hand priming tool(14.12.2015)
use to load mostly hand gun and some rifle cartridges. easy to use and nice not needing to change shell plate. now have 2 that way no need to change size from small to large primer size. I use the old style primer holder ( octagon shape) from my 2 original RCBS priming tools. just prefer those because making the tool better balanced. nothing wrong with the new ones though. only thing that is slightly negative would be the original ones had a stronger sliding gate. this one will bend easier and original were made in AMERICA. the casting was slightly better. all in all great product and excellent customer service RCBS). buy it and you will not be disappointed.
N. prodotto: 100010299 RCBS UNIVERSAL HAND PRIMING TOOL Parti Fabbricante: 90201076683902016 Il supporto universale per cartucce accetta casi da .32 ACP a .45-70 Government. Il cancello di sicurezza brevettato isola l'operazione di inserimento del primer dall'alimentazione del primer, eliminando praticamente la possibilità di detonazione del vassoio. Il vassoio per primer rimovibile orienta i tuoi primer per l'uso e si adatta a qualsiasi confezione di primer di qualsiasi produttore. Accessori inclusi per inserire primer di fucile o pistola di grande e piccolo formato.
119.9CHF24CHF 119.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Universal shell holder will accept cases from .32 ACP to .45-70 Government Patented safety gate isolates the primer seating operation from the primer supply virtually eliminating the possibility of tray detonation Removable primer tray orients your primers for use and will fit any manufacturers primer packaging Included accessories to seat large and small rifle or pistol primers
Altro...
Il supporto universale per cartucce accetta casi da .32 ACP a .45-70 Government. Il cancello di sicurezza brevettato isola l'operazione di inserimento del primer dall'alimentazione del primer, eliminando praticamente la possibilità di detonazione del vassoio. Il vassoio per primer rimovibile orienta i tuoi primer per l'uso e si adatta a qualsiasi confezione di primer di qualsiasi produttore. Accessori inclusi per inserire primer di fucile o pistola di grande e piccolo formato.
Altro...
Punteggi dei clienti per RCBS UNIVERSAL HAND PRIMING TOOL
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4.8
A BIG time saver for reloaders(01.12.2012)
If you do any sort of reloading with a hand or turret press, I would highly recommend this tool for your priming to save you time.
As the name suggests, it fits right in your hand and does not make a mess, so there is no reason why you could not use this indoors in front of the television. I can easily prime at least 1000 cartridges in less than an hour while watching a movie or show. All it takes is a squeeze of your fingers and your cartridge is primed. Best of all, you can feel what is going on so if there is any resistance, you know to stop before something can go wrong.
This priming tool comes with the proper pieces to use both small and large sized primers and it only takes a couple seconds to switch between.
My only two complaints about this particular tool is it is kind of pricy compared to other priming tools like the Lee one. However I have never tried the Lee priming tool so I have no basis of comparison on whether this is any better or worse. The only thing keeping this from being a perfect 5/5 is the cost. My other complaint is the sliding door on the primer holder is very loose so sometimes it will shut on you while you are priming. Not a deal breaker, but it can get annoying sometimes. I remedied this by taping it open when using it.
The benefit of this universal hand priming tool and the regular RCBS hand priming tool is this does not require any shell holders (hence, "universal"). So if you reload more than 2 or 3 different calibers, this will already save you some money over the other one since you do not need to get extra shell holders. Plus this comes with the square primer holder as opposed to the circle holder the other one comes with, which makes it easier to load primers from their boxes (I cannot think of any primers that come in round cases).
I would highly recommend a dedicated hand priming tool as a time saver, even if not this one.
Wow!(10.01.2013)
Expensive for a priming tool, but absolutely top notch as a hand primer. It's comfortable, easy to load primers, comfortable, easy to load the brass, comfortable, and smooooooth. It's also super comfortable! To be perfectly honest, I'd recommend the RCBS bench primer overall, but it's probably not fair to compare a bench primer to a handheld, so this still gets an easy five stars.
Great Product(04.03.2015)
I'm just getting into hand loading, and I've acquired equipment for a single-stage press. I bought the RCBS Universal Hand Priming Tool to handle priming, and I couldn't be happier.
This product is easy to use. It installs primers quickly, easily, and correctly.
This is a great product.
RCBS Universal Primer. (28.09.2015)
I used to use the primer on my Forster co-ax press but it would damage the rims on the base of the cartridge causing measurements to be off. After numerous unsuccessful attempts @ adjusting the Forster I chose the RCBS primer. This has been a very pleasant surprise. I just loaded 50 cartridges in about 5 minutes after initial set up and couldn't be happier. All primers were uniform in depth and seating in my used 6BR Lapua brass. The pull was smooth and consistent and did not fatigue my wrist. The universal jaws fit the brass securely and did not damage the edges. This performed far better than my co-ax press primer.
RCBS hand priming tool(14.12.2015)
use to load mostly hand gun and some rifle cartridges. easy to use and nice not needing to change shell plate. now have 2 that way no need to change size from small to large primer size. I use the old style primer holder ( octagon shape) from my 2 original RCBS priming tools. just prefer those because making the tool better balanced. nothing wrong with the new ones though. only thing that is slightly negative would be the original ones had a stronger sliding gate. this one will bend easier and original were made in AMERICA. the casting was slightly better. all in all great product and excellent customer service RCBS). buy it and you will not be disappointed.