One kit so you can precisely tune the autos listed for smoothest double and/or single actions' pull and proper functioning.KIT #26520 COLT 1911 & COMMANDER - Contains 1 each 19 lb., 20 lb. and 21 lb. hammer springs. Factory spring is 23 lbs.
Altro...
Scelte di Sintonizzazione 3-In-1
Un kit per poter sintonizzare con precisione le auto elencate per il miglior funzionamento delle azioni doppie e/o singole. KIT #26520 COLT 1911 & COMMANDER - Contiene 1 molla del martello da 19 lb, 1 da 20 lb e 1 da 21 lb. La molla di fabbrica è di 23 lb.
Altro...
Punteggi dei clienti per WOLFF KIT #26520
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 3.4
3 Springs in 1 Kit(22.10.2009)
3 springs for fine-tuning the 1911,just as advertised
Springs are too long(05.06.2011)
I bought this three pack for my new Springfield TRP. The springs are difficult to install because of their length and once they are installed will not allow the hammer to be cocked because the springs stacks and will not compress any more. I'm not sure if this Springfield hammer spring housing is different, but I doubt it. All three springs are the same length so I don't think Brownell's made a mistake. Bottom line is they are worthless unless you cut them down and I could have done that with the original spring. BTW the original spring is shorter.
"reduced power spring" don't think so!(05.12.2011)
was to replace the old 'reduced power' mainspring by Wilson combat i have--but unfortunately not going to work. first review was right.
Wolff Kit #26520(27.05.2012)
This worked great when I swapped out the ILS mainspring housing to a STD housing. Note. If you have a Springfield this kit will not work. You must change out the factory ILS housing to a more standard colt style. The internal parts are different due to the locking system.
Great product & value(22.11.2012)
All you need to tune action. Right on spec's! Just install each one 'til you get the trigger pull you want. Wollf is on my list of 1911 products!
N. prodotto: 969265200 WOLFF KIT #26520 Parti Fabbricante: 26520 Un kit per poter sintonizzare con precisione le auto elencate per il miglior funzionamento delle azioni doppie e/o singole. KIT #26520 COLT 1911 & COMMANDER - Contiene 1 molla del martello da 19 lb, 1 da 20 lb e 1 da 21 lb. La molla di fabbrica è di 23 lb.
26.9CHF9CHF 26.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Kit progettato per sintonizzare le pistole Colt 1911 e Commander per un'azione più fluida.
Include molle del martello da 19 lb., 20 lb. e 21 lb., sostituendo la molla di fabbrica da 23 lb.
Adatto per modelli Government, Commander e Officers.
Caratteristiche
Adatto per:
1911
Modello:
Commander,Government,Officers
Peso della spedizione: 0.023kgAltezza di spedizione: 18mmLarghezza di spedizione: 89mmLunghezza di spedizione: 170mm
Dettagli dell'elemento
Made in Usa
Sintonizza il tuo Colt 1911 con il kit molla del cane WOLFF #26520 🔧. Include molle da 19 lb, 20 lb e 21 lb per prestazioni ottimali!
One kit so you can precisely tune the autos listed for smoothest double and/or single actions' pull and proper functioning.KIT #26520 COLT 1911 & COMMANDER - Contains 1 each 19 lb., 20 lb. and 21 lb. hammer springs. Factory spring is 23 lbs.
Altro...
Scelte di Sintonizzazione 3-In-1
Un kit per poter sintonizzare con precisione le auto elencate per il miglior funzionamento delle azioni doppie e/o singole. KIT #26520 COLT 1911 & COMMANDER - Contiene 1 molla del martello da 19 lb, 1 da 20 lb e 1 da 21 lb. La molla di fabbrica è di 23 lb.
Altro...
Punteggi dei clienti per WOLFF KIT #26520
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 3.4
3 Springs in 1 Kit(22.10.2009)
3 springs for fine-tuning the 1911,just as advertised
Springs are too long(05.06.2011)
I bought this three pack for my new Springfield TRP. The springs are difficult to install because of their length and once they are installed will not allow the hammer to be cocked because the springs stacks and will not compress any more. I'm not sure if this Springfield hammer spring housing is different, but I doubt it. All three springs are the same length so I don't think Brownell's made a mistake. Bottom line is they are worthless unless you cut them down and I could have done that with the original spring. BTW the original spring is shorter.
"reduced power spring" don't think so!(05.12.2011)
was to replace the old 'reduced power' mainspring by Wilson combat i have--but unfortunately not going to work. first review was right.
Wolff Kit #26520(27.05.2012)
This worked great when I swapped out the ILS mainspring housing to a STD housing. Note. If you have a Springfield this kit will not work. You must change out the factory ILS housing to a more standard colt style. The internal parts are different due to the locking system.
Great product & value(22.11.2012)
All you need to tune action. Right on spec's! Just install each one 'til you get the trigger pull you want. Wollf is on my list of 1911 products!